mirror of
https://github.com/dashpay/dash.git
synced 2024-12-27 21:12:48 +01:00
d889c036cd
b224a47a1Add address_types test (Pieter Wuille)7ee54fd7cSupport downgrading after recovered keypool witness keys (Pieter Wuille)940a21932SegWit wallet support (Pieter Wuille)f37c64e47Implicitly know about P2WPKH redeemscripts (Pieter Wuille)57273f2b3[test] Serialize CTransaction with witness by default (Pieter Wuille)cf2c0b6f5Support P2WPKH and P2SH-P2WPKH in dumpprivkey (Pieter Wuille)37c03d3e0Support P2WPKH addresses in create/addmultisig (Pieter Wuille)3eaa003c8Extend validateaddress information for P2SH-embedded witness (Pieter Wuille)30a27dc5bExpose method to find key for a single-key destination (Pieter Wuille)985c79552Improve witness destination types and use them more (Pieter Wuille)cbe197470[refactor] GetAccount{PubKey,Address} -> GetAccountDestination (Pieter Wuille)0c8ea6380Abstract out IsSolvable from Witnessifier (Pieter Wuille) Pull request description: This implements a minimum viable implementation of SegWit wallet support, based on top of #11389, and includes part of the functionality from #11089. Two new configuration options are added: * `-addresstype`, with options `legacy`, `p2sh`, and `bech32`. It controls what kind of addresses are produced by `getnewaddress`, `getaccountaddress`, and `createmultisigaddress`. * `-changetype`, with the same options, and by default equal to `-addresstype`, that controls what kind of change is used. All wallet private and public keys can be used for any type of address. Support for address types dependent on different derivation paths will need a major overhaul of how our internal detection of outputs work. I expect that that will happen for a next major version. The above also applies to imported keys, as having a distinction there but not for normal operations is a disaster for testing, and probably for comprehension of users. This has some ugly effects, like needing to associate the provided label to `importprivkey` with each style address for the corresponding key. To deal with witness outputs requiring a corresponding redeemscript in wallet, three approaches are used: * All SegWit addresses created through `getnewaddress` or multisig RPCs explicitly get their redeemscripts added to the wallet file. This means that downgrading after creating a witness address will work, as long as the wallet file is up to date. * All SegWit keys in the wallet get an _implicit_ redeemscript added, without it being written to the file. This means recovery of an old backup will work, as long as you use new software. * All keypool keys that are seen used in transactions explicitly get their redeemscripts added to the wallet files. This means that downgrading after recovering from a backup that includes a witness address will work. These approaches correspond to solutions 3a, 1a, and 5a respectively from https://gist.github.com/sipa/125cfa1615946d0c3f3eec2ad7f250a2. As argued there, there is no full solution for dealing with the case where you both downgrade and restore a backup, so that's also not implemented. `dumpwallet`, `importwallet`, `importmulti`, `signmessage` and `verifymessage` don't work with SegWit addresses yet. They're remaining TODOs, for this PR or a follow-up. Because of that, several tests unexpectedly run with `-addresstype=legacy` for now. Tree-SHA512: d425dbe517c0422061ab8dacdc3a6ae47da071450932ed992c79559d922dff7b2574a31a8c94feccd3761c1dffb6422c50055e6dca8e3cf94a169bc95e39e959
396 lines
17 KiB
Python
Executable File
396 lines
17 KiB
Python
Executable File
#!/usr/bin/env python3
|
|
# Copyright (c) 2014-2017 The Bitcoin Core developers
|
|
# Distributed under the MIT software license, see the accompanying
|
|
# file COPYING or http://www.opensource.org/licenses/mit-license.php.
|
|
"""Test BIP68 implementation."""
|
|
|
|
from test_framework.test_framework import BitcoinTestFramework
|
|
from test_framework.util import *
|
|
from test_framework.blocktools import *
|
|
|
|
SEQUENCE_LOCKTIME_DISABLE_FLAG = (1<<31)
|
|
SEQUENCE_LOCKTIME_TYPE_FLAG = (1<<22) # this means use time (0 means height)
|
|
SEQUENCE_LOCKTIME_GRANULARITY = 9 # this is a bit-shift
|
|
SEQUENCE_LOCKTIME_MASK = 0x0000ffff
|
|
|
|
# RPC error for non-BIP68 final transactions
|
|
NOT_FINAL_ERROR = "64: non-BIP68-final"
|
|
|
|
class BIP68Test(BitcoinTestFramework):
|
|
def set_test_params(self):
|
|
self.num_nodes = 2
|
|
self.extra_args = [[], ["-acceptnonstdtxn=0"]]
|
|
|
|
def run_test(self):
|
|
self.relayfee = self.nodes[0].getnetworkinfo()["relayfee"]
|
|
|
|
# Generate some coins
|
|
self.nodes[0].generate(110)
|
|
|
|
self.log.info("Running test disable flag")
|
|
self.test_disable_flag()
|
|
|
|
self.log.info("Running test sequence-lock-confirmed-inputs")
|
|
self.test_sequence_lock_confirmed_inputs()
|
|
|
|
self.log.info("Running test sequence-lock-unconfirmed-inputs")
|
|
self.test_sequence_lock_unconfirmed_inputs()
|
|
|
|
self.log.info("Running test BIP68 not consensus before versionbits activation")
|
|
self.test_bip68_not_consensus()
|
|
|
|
self.log.info("Activating BIP68 (and 112/113)")
|
|
self.activateCSV()
|
|
|
|
self.log.info("Verifying nVersion=2 transactions are standard.")
|
|
self.log.info("Note that nVersion=2 transactions are always standard (independent of BIP68 activation status).")
|
|
self.test_version2_relay()
|
|
|
|
self.log.info("Passed")
|
|
|
|
# Test that BIP68 is not in effect if tx version is 1, or if
|
|
# the first sequence bit is set.
|
|
def test_disable_flag(self):
|
|
# Create some unconfirmed inputs
|
|
new_addr = self.nodes[0].getnewaddress()
|
|
self.nodes[0].sendtoaddress(new_addr, 2) # send 2 BTC
|
|
|
|
utxos = self.nodes[0].listunspent(0, 0)
|
|
assert(len(utxos) > 0)
|
|
|
|
utxo = utxos[0]
|
|
|
|
tx1 = CTransaction()
|
|
value = int(satoshi_round(utxo["amount"] - self.relayfee)*COIN)
|
|
|
|
# Check that the disable flag disables relative locktime.
|
|
# If sequence locks were used, this would require 1 block for the
|
|
# input to mature.
|
|
sequence_value = SEQUENCE_LOCKTIME_DISABLE_FLAG | 1
|
|
tx1.vin = [CTxIn(COutPoint(int(utxo["txid"], 16), utxo["vout"]), nSequence=sequence_value)]
|
|
tx1.vout = [CTxOut(value, CScript([b'a']))]
|
|
|
|
tx1_signed = self.nodes[0].signrawtransaction(ToHex(tx1))["hex"]
|
|
tx1_id = self.nodes[0].sendrawtransaction(tx1_signed)
|
|
tx1_id = int(tx1_id, 16)
|
|
|
|
# This transaction will enable sequence-locks, so this transaction should
|
|
# fail
|
|
tx2 = CTransaction()
|
|
tx2.nVersion = 2
|
|
sequence_value = sequence_value & 0x7fffffff
|
|
tx2.vin = [CTxIn(COutPoint(tx1_id, 0), nSequence=sequence_value)]
|
|
tx2.vout = [CTxOut(int(value-self.relayfee*COIN), CScript([b'a']))]
|
|
tx2.rehash()
|
|
|
|
assert_raises_rpc_error(-26, NOT_FINAL_ERROR, self.nodes[0].sendrawtransaction, ToHex(tx2))
|
|
|
|
# Setting the version back down to 1 should disable the sequence lock,
|
|
# so this should be accepted.
|
|
tx2.nVersion = 1
|
|
|
|
self.nodes[0].sendrawtransaction(ToHex(tx2))
|
|
|
|
# Calculate the median time past of a prior block ("confirmations" before
|
|
# the current tip).
|
|
def get_median_time_past(self, confirmations):
|
|
block_hash = self.nodes[0].getblockhash(self.nodes[0].getblockcount()-confirmations)
|
|
return self.nodes[0].getblockheader(block_hash)["mediantime"]
|
|
|
|
# Test that sequence locks are respected for transactions spending confirmed inputs.
|
|
def test_sequence_lock_confirmed_inputs(self):
|
|
# Create lots of confirmed utxos, and use them to generate lots of random
|
|
# transactions.
|
|
max_outputs = 50
|
|
addresses = []
|
|
while len(addresses) < max_outputs:
|
|
addresses.append(self.nodes[0].getnewaddress())
|
|
while len(self.nodes[0].listunspent()) < 200:
|
|
import random
|
|
random.shuffle(addresses)
|
|
num_outputs = random.randint(1, max_outputs)
|
|
outputs = {}
|
|
for i in range(num_outputs):
|
|
outputs[addresses[i]] = random.randint(1, 20)*0.01
|
|
self.nodes[0].sendmany("", outputs)
|
|
self.nodes[0].generate(1)
|
|
|
|
utxos = self.nodes[0].listunspent()
|
|
|
|
# Try creating a lot of random transactions.
|
|
# Each time, choose a random number of inputs, and randomly set
|
|
# some of those inputs to be sequence locked (and randomly choose
|
|
# between height/time locking). Small random chance of making the locks
|
|
# all pass.
|
|
for i in range(400):
|
|
# Randomly choose up to 10 inputs
|
|
num_inputs = random.randint(1, 10)
|
|
random.shuffle(utxos)
|
|
|
|
# Track whether any sequence locks used should fail
|
|
should_pass = True
|
|
|
|
# Track whether this transaction was built with sequence locks
|
|
using_sequence_locks = False
|
|
|
|
tx = CTransaction()
|
|
tx.nVersion = 2
|
|
value = 0
|
|
for j in range(num_inputs):
|
|
sequence_value = 0xfffffffe # this disables sequence locks
|
|
|
|
# 50% chance we enable sequence locks
|
|
if random.randint(0,1):
|
|
using_sequence_locks = True
|
|
|
|
# 10% of the time, make the input sequence value pass
|
|
input_will_pass = (random.randint(1,10) == 1)
|
|
sequence_value = utxos[j]["confirmations"]
|
|
if not input_will_pass:
|
|
sequence_value += 1
|
|
should_pass = False
|
|
|
|
# Figure out what the median-time-past was for the confirmed input
|
|
# Note that if an input has N confirmations, we're going back N blocks
|
|
# from the tip so that we're looking up MTP of the block
|
|
# PRIOR to the one the input appears in, as per the BIP68 spec.
|
|
orig_time = self.get_median_time_past(utxos[j]["confirmations"])
|
|
cur_time = self.get_median_time_past(0) # MTP of the tip
|
|
|
|
# can only timelock this input if it's not too old -- otherwise use height
|
|
can_time_lock = True
|
|
if ((cur_time - orig_time) >> SEQUENCE_LOCKTIME_GRANULARITY) >= SEQUENCE_LOCKTIME_MASK:
|
|
can_time_lock = False
|
|
|
|
# if time-lockable, then 50% chance we make this a time lock
|
|
if random.randint(0,1) and can_time_lock:
|
|
# Find first time-lock value that fails, or latest one that succeeds
|
|
time_delta = sequence_value << SEQUENCE_LOCKTIME_GRANULARITY
|
|
if input_will_pass and time_delta > cur_time - orig_time:
|
|
sequence_value = ((cur_time - orig_time) >> SEQUENCE_LOCKTIME_GRANULARITY)
|
|
elif (not input_will_pass and time_delta <= cur_time - orig_time):
|
|
sequence_value = ((cur_time - orig_time) >> SEQUENCE_LOCKTIME_GRANULARITY)+1
|
|
sequence_value |= SEQUENCE_LOCKTIME_TYPE_FLAG
|
|
tx.vin.append(CTxIn(COutPoint(int(utxos[j]["txid"], 16), utxos[j]["vout"]), nSequence=sequence_value))
|
|
value += utxos[j]["amount"]*COIN
|
|
# Overestimate the size of the tx - signatures should be less than 120 bytes, and leave 50 for the output
|
|
tx_size = len(ToHex(tx))//2 + 120*num_inputs + 50
|
|
tx.vout.append(CTxOut(int(value-self.relayfee*tx_size*COIN/1000), CScript([b'a'])))
|
|
rawtx = self.nodes[0].signrawtransaction(ToHex(tx))["hex"]
|
|
|
|
if (using_sequence_locks and not should_pass):
|
|
# This transaction should be rejected
|
|
assert_raises_rpc_error(-26, NOT_FINAL_ERROR, self.nodes[0].sendrawtransaction, rawtx)
|
|
else:
|
|
# This raw transaction should be accepted
|
|
self.nodes[0].sendrawtransaction(rawtx)
|
|
utxos = self.nodes[0].listunspent()
|
|
|
|
# Test that sequence locks on unconfirmed inputs must have nSequence
|
|
# height or time of 0 to be accepted.
|
|
# Then test that BIP68-invalid transactions are removed from the mempool
|
|
# after a reorg.
|
|
def test_sequence_lock_unconfirmed_inputs(self):
|
|
# Store height so we can easily reset the chain at the end of the test
|
|
cur_height = self.nodes[0].getblockcount()
|
|
|
|
# Create a mempool tx.
|
|
txid = self.nodes[0].sendtoaddress(self.nodes[0].getnewaddress(), 2)
|
|
tx1 = FromHex(CTransaction(), self.nodes[0].getrawtransaction(txid))
|
|
tx1.rehash()
|
|
|
|
# Anyone-can-spend mempool tx.
|
|
# Sequence lock of 0 should pass.
|
|
tx2 = CTransaction()
|
|
tx2.nVersion = 2
|
|
tx2.vin = [CTxIn(COutPoint(tx1.sha256, 0), nSequence=0)]
|
|
tx2.vout = [CTxOut(int(tx1.vout[0].nValue - self.relayfee*COIN), CScript([b'a']))]
|
|
tx2_raw = self.nodes[0].signrawtransaction(ToHex(tx2))["hex"]
|
|
tx2 = FromHex(tx2, tx2_raw)
|
|
tx2.rehash()
|
|
|
|
self.nodes[0].sendrawtransaction(tx2_raw)
|
|
|
|
# Create a spend of the 0th output of orig_tx with a sequence lock
|
|
# of 1, and test what happens when submitting.
|
|
# orig_tx.vout[0] must be an anyone-can-spend output
|
|
def test_nonzero_locks(orig_tx, node, relayfee, use_height_lock):
|
|
sequence_value = 1
|
|
if not use_height_lock:
|
|
sequence_value |= SEQUENCE_LOCKTIME_TYPE_FLAG
|
|
|
|
tx = CTransaction()
|
|
tx.nVersion = 2
|
|
tx.vin = [CTxIn(COutPoint(orig_tx.sha256, 0), nSequence=sequence_value)]
|
|
tx.vout = [CTxOut(int(orig_tx.vout[0].nValue - relayfee*COIN), CScript([b'a']))]
|
|
tx.rehash()
|
|
|
|
if (orig_tx.hash in node.getrawmempool()):
|
|
# sendrawtransaction should fail if the tx is in the mempool
|
|
assert_raises_rpc_error(-26, NOT_FINAL_ERROR, node.sendrawtransaction, ToHex(tx))
|
|
else:
|
|
# sendrawtransaction should succeed if the tx is not in the mempool
|
|
node.sendrawtransaction(ToHex(tx))
|
|
|
|
return tx
|
|
|
|
test_nonzero_locks(tx2, self.nodes[0], self.relayfee, use_height_lock=True)
|
|
test_nonzero_locks(tx2, self.nodes[0], self.relayfee, use_height_lock=False)
|
|
|
|
# Now mine some blocks, but make sure tx2 doesn't get mined.
|
|
# Use prioritisetransaction to lower the effective feerate to 0
|
|
self.nodes[0].prioritisetransaction(txid=tx2.hash, fee_delta=int(-self.relayfee*COIN))
|
|
cur_time = int(time.time())
|
|
for i in range(10):
|
|
self.nodes[0].setmocktime(cur_time + 600)
|
|
self.nodes[0].generate(1)
|
|
cur_time += 600
|
|
|
|
assert(tx2.hash in self.nodes[0].getrawmempool())
|
|
|
|
test_nonzero_locks(tx2, self.nodes[0], self.relayfee, use_height_lock=True)
|
|
test_nonzero_locks(tx2, self.nodes[0], self.relayfee, use_height_lock=False)
|
|
|
|
# Mine tx2, and then try again
|
|
self.nodes[0].prioritisetransaction(txid=tx2.hash, fee_delta=int(self.relayfee*COIN))
|
|
|
|
# Advance the time on the node so that we can test timelocks
|
|
self.nodes[0].setmocktime(cur_time+600)
|
|
self.nodes[0].generate(1)
|
|
assert(tx2.hash not in self.nodes[0].getrawmempool())
|
|
|
|
# Now that tx2 is not in the mempool, a sequence locked spend should
|
|
# succeed
|
|
tx3 = test_nonzero_locks(tx2, self.nodes[0], self.relayfee, use_height_lock=False)
|
|
assert(tx3.hash in self.nodes[0].getrawmempool())
|
|
|
|
self.nodes[0].generate(1)
|
|
assert(tx3.hash not in self.nodes[0].getrawmempool())
|
|
|
|
# One more test, this time using height locks
|
|
tx4 = test_nonzero_locks(tx3, self.nodes[0], self.relayfee, use_height_lock=True)
|
|
assert(tx4.hash in self.nodes[0].getrawmempool())
|
|
|
|
# Now try combining confirmed and unconfirmed inputs
|
|
tx5 = test_nonzero_locks(tx4, self.nodes[0], self.relayfee, use_height_lock=True)
|
|
assert(tx5.hash not in self.nodes[0].getrawmempool())
|
|
|
|
utxos = self.nodes[0].listunspent()
|
|
tx5.vin.append(CTxIn(COutPoint(int(utxos[0]["txid"], 16), utxos[0]["vout"]), nSequence=1))
|
|
tx5.vout[0].nValue += int(utxos[0]["amount"]*COIN)
|
|
raw_tx5 = self.nodes[0].signrawtransaction(ToHex(tx5))["hex"]
|
|
|
|
assert_raises_rpc_error(-26, NOT_FINAL_ERROR, self.nodes[0].sendrawtransaction, raw_tx5)
|
|
|
|
# Test mempool-BIP68 consistency after reorg
|
|
#
|
|
# State of the transactions in the last blocks:
|
|
# ... -> [ tx2 ] -> [ tx3 ]
|
|
# tip-1 tip
|
|
# And currently tx4 is in the mempool.
|
|
#
|
|
# If we invalidate the tip, tx3 should get added to the mempool, causing
|
|
# tx4 to be removed (fails sequence-lock).
|
|
self.nodes[0].invalidateblock(self.nodes[0].getbestblockhash())
|
|
assert(tx4.hash not in self.nodes[0].getrawmempool())
|
|
assert(tx3.hash in self.nodes[0].getrawmempool())
|
|
|
|
# Now mine 2 empty blocks to reorg out the current tip (labeled tip-1 in
|
|
# diagram above).
|
|
# This would cause tx2 to be added back to the mempool, which in turn causes
|
|
# tx3 to be removed.
|
|
tip = int(self.nodes[0].getblockhash(self.nodes[0].getblockcount()-1), 16)
|
|
height = self.nodes[0].getblockcount()
|
|
for i in range(2):
|
|
block = create_block(tip, create_coinbase(height), cur_time)
|
|
block.nVersion = 3
|
|
block.rehash()
|
|
block.solve()
|
|
tip = block.sha256
|
|
height += 1
|
|
self.nodes[0].submitblock(ToHex(block))
|
|
cur_time += 1
|
|
|
|
mempool = self.nodes[0].getrawmempool()
|
|
assert(tx3.hash not in mempool)
|
|
assert(tx2.hash in mempool)
|
|
|
|
# Reset the chain and get rid of the mocktimed-blocks
|
|
self.nodes[0].setmocktime(0)
|
|
self.nodes[0].invalidateblock(self.nodes[0].getblockhash(cur_height+1))
|
|
self.nodes[0].generate(10)
|
|
|
|
# Make sure that BIP68 isn't being used to validate blocks, prior to
|
|
# versionbits activation. If more blocks are mined prior to this test
|
|
# being run, then it's possible the test has activated the soft fork, and
|
|
# this test should be moved to run earlier, or deleted.
|
|
def test_bip68_not_consensus(self):
|
|
assert(get_bip9_status(self.nodes[0], 'csv')['status'] != 'active')
|
|
txid = self.nodes[0].sendtoaddress(self.nodes[0].getnewaddress(), 2)
|
|
|
|
tx1 = FromHex(CTransaction(), self.nodes[0].getrawtransaction(txid))
|
|
tx1.rehash()
|
|
|
|
# Make an anyone-can-spend transaction
|
|
tx2 = CTransaction()
|
|
tx2.nVersion = 1
|
|
tx2.vin = [CTxIn(COutPoint(tx1.sha256, 0), nSequence=0)]
|
|
tx2.vout = [CTxOut(int(tx1.vout[0].nValue - self.relayfee*COIN), CScript([b'a']))]
|
|
|
|
# sign tx2
|
|
tx2_raw = self.nodes[0].signrawtransaction(ToHex(tx2))["hex"]
|
|
tx2 = FromHex(tx2, tx2_raw)
|
|
tx2.rehash()
|
|
|
|
self.nodes[0].sendrawtransaction(ToHex(tx2))
|
|
|
|
# Now make an invalid spend of tx2 according to BIP68
|
|
sequence_value = 100 # 100 block relative locktime
|
|
|
|
tx3 = CTransaction()
|
|
tx3.nVersion = 2
|
|
tx3.vin = [CTxIn(COutPoint(tx2.sha256, 0), nSequence=sequence_value)]
|
|
tx3.vout = [CTxOut(int(tx2.vout[0].nValue - self.relayfee*COIN), CScript([b'a']))]
|
|
tx3.rehash()
|
|
|
|
assert_raises_rpc_error(-26, NOT_FINAL_ERROR, self.nodes[0].sendrawtransaction, ToHex(tx3))
|
|
|
|
# make a block that violates bip68; ensure that the tip updates
|
|
tip = int(self.nodes[0].getbestblockhash(), 16)
|
|
block = create_block(tip, create_coinbase(self.nodes[0].getblockcount()+1))
|
|
block.nVersion = 3
|
|
block.vtx.extend([tx1, tx2, tx3])
|
|
block.hashMerkleRoot = block.calc_merkle_root()
|
|
block.rehash()
|
|
add_witness_commitment(block)
|
|
block.solve()
|
|
|
|
self.nodes[0].submitblock(bytes_to_hex_str(block.serialize(True)))
|
|
assert_equal(self.nodes[0].getbestblockhash(), block.hash)
|
|
|
|
def activateCSV(self):
|
|
# activation should happen at block height 432 (3 periods)
|
|
# getblockchaininfo will show CSV as active at block 431 (144 * 3 -1) since it's returning whether CSV is active for the next block.
|
|
min_activation_height = 432
|
|
height = self.nodes[0].getblockcount()
|
|
assert_greater_than(min_activation_height - height, 2)
|
|
self.nodes[0].generate(min_activation_height - height - 2)
|
|
assert_equal(get_bip9_status(self.nodes[0], 'csv')['status'], "locked_in")
|
|
self.nodes[0].generate(1)
|
|
assert_equal(get_bip9_status(self.nodes[0], 'csv')['status'], "active")
|
|
sync_blocks(self.nodes)
|
|
|
|
# Use self.nodes[1] to test that version 2 transactions are standard.
|
|
def test_version2_relay(self):
|
|
inputs = [ ]
|
|
outputs = { self.nodes[1].getnewaddress() : 1.0 }
|
|
rawtx = self.nodes[1].createrawtransaction(inputs, outputs)
|
|
rawtxfund = self.nodes[1].fundrawtransaction(rawtx)['hex']
|
|
tx = FromHex(CTransaction(), rawtxfund)
|
|
tx.nVersion = 2
|
|
tx_signed = self.nodes[1].signrawtransaction(ToHex(tx))["hex"]
|
|
self.nodes[1].sendrawtransaction(tx_signed)
|
|
|
|
if __name__ == '__main__':
|
|
BIP68Test().main()
|