dash/doc/man/dash-qt.1

.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.3.
.TH DASH-QT "1" "December 2024" "dash-qt v22.0.0" "User Commands"
.SH NAME
dash-qt \- manual page for dash-qt v22.0.0
.SH SYNOPSIS
.B dash-qt
[\fI\,command-line options\/\fR]
.SH DESCRIPTION
Dash Core version v22.0.0
.SH OPTIONS
.HP
\-?
.IP
Print this help message and exit
.HP
\fB\-alertnotify=\fR<cmd>
.IP
Execute command when an alert is raised (%s in cmd is replaced by
message)
.HP
\fB\-assumevalid=\fR<hex>
.IP
If this block is in the chain assume that it and its ancestors are valid
and potentially skip their script verification (0 to verify all,
default:
000000000000001cf26547602d982dcaa909231bbcd1e70c0eb3c65de25473ba,
testnet:
000000eef20eb0062abd4e799967e98bdebb165dd1c567ab4118c1c86c6e948f)
.HP
\fB\-blockfilterindex=\fR<type>
.IP
Maintain an index of compact filters by block (default: 0, values:
basic). If <type> is not supplied or if <type> = 1, indexes for
all known types are enabled.
.HP
\fB\-blocknotify=\fR<cmd>
.IP
Execute command when the best block changes (%s in cmd is replaced by
block hash)
.HP
\fB\-blockreconstructionextratxn=\fR<n>
.IP
Extra transactions to keep in memory for compact block reconstructions
(default: 100)
.HP
\fB\-blocksdir=\fR<dir>
.IP
Specify directory to hold blocks subdirectory for *.dat files (default:
<datadir>)
.HP
\fB\-blocksonly\fR
.IP
Whether to reject transactions from network peers. Automatic broadcast
and rebroadcast of any transactions from inbound peers is
disabled, unless the peer has the 'forcerelay' permission. RPC
transactions are not affected. (default: 0)
.HP
\fB\-chainlocknotify=\fR<cmd>
.IP
Execute command when the best chainlock changes (%s in cmd is replaced
by chainlocked block hash)
.HP
\fB\-coinstatsindex\fR
.IP
Maintain coinstats index used by the gettxoutsetinfo RPC (default: 0)
.HP
\fB\-conf=\fR<file>
.IP
Specify path to read\-only configuration file. Relative paths will be
prefixed by datadir location. (default: dash.conf)
.HP
\fB\-daemon\fR
.IP
Run in the background as a daemon and accept commands (default: 0)
.HP
\fB\-daemonwait\fR
.IP
Wait for initialization to be finished before exiting. This implies
\fB\-daemon\fR (default: 0)
.HP
\fB\-datadir=\fR<dir>
.IP
Specify data directory
.HP
\fB\-dbcache=\fR<n>
.IP
Maximum database cache size <n> MiB (4 to 16384, default: 300). In
addition, unused mempool memory is shared for this cache (see
\fB\-maxmempool\fR).
.HP
\fB\-debuglogfile=\fR<file>
.IP
Specify location of debug log file. Relative paths will be prefixed by a
net\-specific datadir location. (\fB\-nodebuglogfile\fR to disable;
default: debug.log)
.HP
\fB\-includeconf=\fR<file>
.IP
Specify additional configuration file, relative to the \fB\-datadir\fR path
(only useable from configuration file, not command line)
.HP
\fB\-loadblock=\fR<file>
.IP
Imports blocks from external file on startup
.HP
\fB\-maxmempool=\fR<n>
.IP
Keep the transaction memory pool below <n> megabytes (default: 300)
.HP
\fB\-maxorphantxsize=\fR<n>
.IP
Maximum total size of all orphan transactions in megabytes (default: 10)
.HP
\fB\-maxrecsigsage=\fR<n>
.IP
Number of seconds to keep LLMQ recovery sigs (default: 604800)
.HP
\fB\-mempoolexpiry=\fR<n>
.IP
Do not keep transactions in the mempool longer than <n> hours (default:
336)
.HP
\fB\-par=\fR<n>
.IP
Set the number of script verification threads (\fB\-16\fR to 15, 0 = auto, <0 =
leave that many cores free, default: 0)
.HP
\fB\-persistmempool\fR
.IP
Whether to save the mempool on shutdown and load on restart (default: 1)
.HP
\fB\-pid=\fR<file>
.IP
Specify pid file. Relative paths will be prefixed by a net\-specific
datadir location. (default: dashd.pid)
.HP
\fB\-prune=\fR<n>
.IP
Reduce storage requirements by enabling pruning (deleting) of old
blocks. This allows the pruneblockchain RPC to be called to
delete specific blocks, and enables automatic pruning of old
blocks if a target size in MiB is provided. This mode is
incompatible with \fB\-txindex\fR, \fB\-rescan\fR and \fB\-disablegovernance\fR=\fI\,false\/\fR.
Warning: Reverting this setting requires re\-downloading the
entire blockchain. (default: 0 = disable pruning blocks, 1 =
allow manual pruning via RPC, >945 = automatically prune block
files to stay under the specified target size in MiB)
.HP
\fB\-settings=\fR<file>
.IP
Specify path to dynamic settings data file. Can be disabled with
\fB\-nosettings\fR. File is written at runtime and not meant to be
edited by users (use dash.conf instead for custom settings).
Relative paths will be prefixed by datadir location. (default:
settings.json)
.HP
\fB\-startupnotify=\fR<cmd>
.IP
Execute command on startup.
.HP
\fB\-syncmempool\fR
.IP
Sync mempool from other nodes on start (default: 1)
.HP
\fB\-sysperms\fR
.IP
Create new files with system default permissions, instead of umask 077
(only effective with disabled wallet functionality)
.HP
\fB\-version\fR
.IP
Print version and exit
.PP
Connection options:
.HP
\fB\-addnode=\fR<ip>
.IP
Add a node to connect to and attempt to keep the connection open (see
the addnode RPC help for more info). This option can be specified
multiple times to add multiple nodes; connections are limited to
8 at a time and are counted separately from the \fB\-maxconnections\fR
limit.
.HP
\fB\-allowprivatenet\fR
.IP
Allow RFC1918 addresses to be relayed and connected to (default: 0)
.HP
\fB\-asmap=\fR<file>
.IP
Specify asn mapping used for bucketing of the peers (default:
ip_asn.map). Relative paths will be prefixed by the net\-specific
datadir location.
.HP
\fB\-bantime=\fR<n>
.IP
Default duration (in seconds) of manually configured bans (default:
86400)
.HP
\fB\-bind=\fR<addr>[:<port>][=onion]
.IP
Bind to given address and always listen on it (default: 0.0.0.0). Use
[host]:port notation for IPv6. Append =onion to tag any incoming
connections to that address and port as incoming Tor connections
(default: 127.0.0.1:9996=onion, testnet: 127.0.0.1:19996=onion,
regtest: 127.0.0.1:19896=onion)
.HP
\fB\-cjdnsreachable\fR
.IP
If set, then this host is configured for CJDNS (connecting to fc00::/8
addresses would lead us to the CJDNS network, see doc/cjdns.md)
(default: 0)
.HP
\fB\-connect=\fR<ip>
.IP
Connect only to the specified node; \fB\-noconnect\fR disables automatic
connections (the rules for this peer are the same as for
\fB\-addnode\fR). This option can be specified multiple times to connect
to multiple nodes.
.HP
\fB\-discover\fR
.IP
Discover own IP addresses (default: 1 when listening and no \fB\-externalip\fR
or \fB\-proxy\fR)
.HP
\fB\-dns\fR
.IP
Allow DNS lookups for \fB\-addnode\fR, \fB\-seednode\fR and \fB\-connect\fR (default: 1)
.HP
\fB\-dnsseed\fR
.IP
Query for peer addresses via DNS lookup, if low on addresses (default: 1
unless \fB\-connect\fR used)
.HP
\fB\-externalip=\fR<ip>
.IP
Specify your own public address
.HP
\fB\-fixedseeds\fR
.IP
Allow fixed seeds if DNS seeds don't provide peers (default: 1)
.HP
\fB\-forcednsseed\fR
.IP
Always query for peer addresses via DNS lookup (default: 0)
.HP
\fB\-i2pacceptincoming\fR
.IP
Whether to accept inbound I2P connections (default: 1). Ignored if
\fB\-i2psam\fR is not set. Listening for inbound I2P connections is done
through the SAM proxy, not by binding to a local address and
port.
.HP
\fB\-i2psam=\fR<ip:port>
.IP
I2P SAM proxy to reach I2P peers and accept I2P connections (default:
none)
.HP
\fB\-listen\fR
.IP
Accept connections from outside (default: 1 if no \fB\-proxy\fR or \fB\-connect\fR)
.HP
\fB\-listenonion\fR
.IP
Automatically create Tor onion service (default: 1)
.HP
\fB\-maxconnections=\fR<n>
.IP
Maintain at most <n> connections to peers (temporary service connections
excluded) (default: 125). This limit does not apply to
connections manually added via \fB\-addnode\fR or the addnode RPC, which
have a separate limit of 8.
.HP
\fB\-maxreceivebuffer=\fR<n>
.IP
Maximum per\-connection receive buffer, <n>*1000 bytes (default: 5000)
.HP
\fB\-maxsendbuffer=\fR<n>
.IP
Maximum per\-connection memory usage for the send buffer, <n>*1000 bytes
(default: 1000)
.HP
\fB\-maxtimeadjustment\fR
.IP
Maximum allowed median peer time offset adjustment. Local perspective of
time may be influenced by peers forward or backward by this
amount. (default: 4200 seconds)
.HP
\fB\-maxuploadtarget=\fR<n>
.IP
Tries to keep outbound traffic under the given target per 24h. Limit
does not apply to peers with 'download' permission or blocks
created within past week. 0 = no limit (default: 0M). Optional
suffix units [k|K|m|M|g|G|t|T] (default: M). Lowercase is 1000
base while uppercase is 1024 base
.HP
\fB\-natpmp\fR
.IP
Use NAT\-PMP to map the listening port (default: 0)
.HP
\fB\-networkactive\fR
.IP
Enable all P2P network activity (default: 1). Can be changed by the
setnetworkactive RPC command
.HP
\fB\-onion=\fR<ip:port>
.IP
Use separate SOCKS5 proxy to reach peers via Tor onion services, set
\fB\-noonion\fR to disable (default: \fB\-proxy\fR)
.HP
\fB\-onlynet=\fR<net>
.IP
Make automatic outbound connections only to network <net> (ipv4, ipv6,
onion, i2p, cjdns). Inbound and manual connections are not
affected by this option. It can be specified multiple times to
allow multiple networks.
.HP
\fB\-peerblockfilters\fR
.IP
Serve compact block filters to peers per BIP 157 (default: 0)
.HP
\fB\-peerbloomfilters\fR
.IP
Support filtering of blocks and transaction with bloom filters (default:
1)
.HP
\fB\-peertimeout=\fR<n>
.IP
Specify a p2p connection timeout delay in seconds. After connecting to a
peer, wait this amount of time before considering disconnection
based on inactivity (minimum: 1, default: 60)
.HP
\fB\-permitbaremultisig\fR
.IP
Relay non\-P2SH multisig (default: 1)
.HP
\fB\-port=\fR<port>
.IP
Listen for connections on <port>. Nodes not using the default ports
(default: 9999, testnet: 19999, regtest: 19899) are unlikely to
get incoming connections. Not relevant for I2P (see doc/i2p.md).
.HP
\fB\-proxy=\fR<ip:port>
.IP
Connect through SOCKS5 proxy, set \fB\-noproxy\fR to disable (default:
disabled)
.HP
\fB\-proxyrandomize\fR
.IP
Randomize credentials for every proxy connection. This enables Tor
stream isolation (default: 1)
.HP
\fB\-seednode=\fR<ip>
.IP
Connect to a node to retrieve peer addresses, and disconnect. This
option can be specified multiple times to connect to multiple
nodes.
.HP
\fB\-socketevents=\fR<mode>
.IP
Socket events mode, which must be one of 'select', 'poll', 'epoll' or
\&'kqueue', depending on your system (default: Linux \- 'epoll',
FreeBSD/Apple \- 'kqueue', Windows \- 'select')
.HP
\fB\-timeout=\fR<n>
.IP
Specify socket connection timeout in milliseconds. If an initial attempt
to connect is unsuccessful after this amount of time, drop it
(minimum: 1, default: 5000)
.HP
\fB\-torcontrol=\fR<ip>:<port>
.IP
Tor control port to use if onion listening enabled (default:
127.0.0.1:9051)
.HP
\fB\-torpassword=\fR<pass>
.IP
Tor control port password (default: empty)
.HP
\fB\-upnp\fR
.IP
Use UPnP to map the listening port (default: 1 when listening and no
\fB\-proxy\fR)
.HP
\fB\-v2transport\fR
.IP
Support v2 transport (default: 0)
.HP
\fB\-whitebind=\fR<[permissions@]addr>
.IP
Bind to the given address and add permission flags to the peers
connecting to it. Use [host]:port notation for IPv6. Allowed
permissions: bloomfilter (allow requesting BIP37 filtered blocks
and transactions), noban (do not ban for misbehavior; implies
download), forcerelay (relay transactions that are already in the
mempool; implies relay), relay (relay even in \fB\-blocksonly\fR mode),
mempool (allow requesting BIP35 mempool contents), download
(allow getheaders during IBD, no disconnect after maxuploadtarget
limit), addr (responses to GETADDR avoid hitting the cache and
contain random records with the most up\-to\-date info). Specify
multiple permissions separated by commas (default:
download,noban,mempool,relay). Can be specified multiple times.
.HP
\fB\-whitelist=\fR<[permissions@]IP address or network>
.IP
Add permission flags to the peers connecting from the given IP address
(e.g. 1.2.3.4) or CIDR\-notated network (e.g. 1.2.3.0/24). Uses
the same permissions as \fB\-whitebind\fR. Can be specified multiple
times.
.PP
Indexing options:
.HP
\fB\-addressindex\fR
.IP
Maintain a full address index, used to query for the balance, txids and
unspent outputs for addresses (default: 0)
.HP
\fB\-reindex\fR
.IP
Rebuild chain state and block index from the blk*.dat files on disk.
This will also rebuild active optional indexes.
.HP
\fB\-reindex\-chainstate\fR
.IP
Rebuild chain state from the currently indexed blocks. When in pruning
mode or if blocks on disk might be corrupted, use full \fB\-reindex\fR
instead. Deactivate all optional indexes before running this.
.HP
\fB\-spentindex\fR
.IP
Maintain a full spent index, used to query the spending txid and input
index for an outpoint (default: 0)
.HP
\fB\-timestampindex\fR
.IP
Maintain a timestamp index for block hashes, used to query blocks hashes
by a range of timestamps (default: 0)
.HP
\fB\-txindex\fR
.IP
Maintain a full transaction index, used by the getrawtransaction rpc
call (default: 1)
.PP
Masternode options:
.HP
\fB\-deprecated\-platform\-user=\fR<user>
.IP
Set the username for the "platform user", a restricted user intended to
be used by Dash Platform, to the specified username.
.HP
\fB\-llmq\-data\-recovery=\fR<n>
.IP
Enable automated quorum data recovery (default: 1)
.HP
\fB\-llmq\-qvvec\-sync=\fR<quorum_name>:<mode>
.IP
Defines from which LLMQ type the masternode should sync quorum
verification vectors. Can be used multiple times with different
LLMQ types. <mode>: 0 (sync always from all quorums of the type
defined by <quorum_name>), 1 (sync from all quorums of the type
defined by <quorum_name> if a member of any of the quorums)
.HP
\fB\-masternodeblsprivkey=\fR<hex>
.IP
Set the masternode BLS private key and enable the client to act as a
masternode
.PP
Statsd options:
.HP
\fB\-statsbatchsize=\fR<bytes>
.IP
Specify the size of each batch of stats messages (default: 1024)
.HP
\fB\-statsduration=\fR<ms>
.IP
Specify the number of milliseconds between stats messages (default:
1000)
.HP
\fB\-statshost=\fR<ip>
.IP
Specify statsd host (default: )
.HP
\fB\-statsperiod=\fR<seconds>
.IP
Specify the number of seconds between periodic measurements (default:
60)
.HP
\fB\-statsport=\fR<port>
.IP
Specify statsd port (default: 8125)
.HP
\fB\-statsprefix=\fR<string>
.IP
Specify an optional string prepended to every stats key (default: )
.HP
\fB\-statssuffix=\fR<string>
.IP
Specify an optional string appended to every stats key (default: )
.PP
Wallet options:
.HP
\fB\-avoidpartialspends\fR
.IP
Group outputs by address, selecting many (possibly all) or none, instead
of selecting on a per\-output basis. Privacy is improved as
addresses are mostly swept with fewer transactions and outputs
are aggregated in clean change addresses. It may result in higher
fees due to less optimal coin selection caused by this added
limitation and possibly a larger\-than\-necessary number of inputs
being used. Always enabled for wallets with "avoid_reuse"
enabled, otherwise default: 0.
.HP
\fB\-createwalletbackups=\fR<n>
.IP
Number of automatic wallet backups (default: 10)
.HP
\fB\-disablewallet\fR
.IP
Do not load the wallet and disable wallet RPC calls
.HP
\fB\-instantsendnotify=\fR<cmd>
.IP
Execute command when a wallet InstantSend transaction is successfully
locked. %s in cmd is replaced by TxID and %w is replaced by
wallet name. %w is not currently implemented on Windows. On
systems where %w is supported, it should NOT be quoted because
this would break shell escaping used to invoke the command.
.HP
\fB\-keypool=\fR<n>
.IP
Set key pool size to <n> (default: 1000). Warning: Smaller sizes may
increase the risk of losing funds when restoring from an old
backup, if none of the addresses in the original keypool have
been used.
.HP
\fB\-maxapsfee=\fR<n>
.IP
Spend up to this amount in additional (absolute) fees (in DASH) if it
allows the use of partial spend avoidance (default: 0.00)
.HP
\fB\-rescan=\fR<mode>
.IP
Rescan the block chain for missing wallet transactions on startup (1 =
start from wallet creation time, 2 = start from genesis block)
.HP
\fB\-spendzeroconfchange\fR
.IP
Spend unconfirmed change when sending transactions (default: 1)
.HP
\fB\-wallet=\fR<path>
.IP
Specify wallet path to load at startup. Can be used multiple times to
load multiple wallets. Path is to a directory containing wallet
data and log files. If the path is not absolute, it is
interpreted relative to <walletdir>. This only loads existing
wallets and does not create new ones. For backwards compatibility
this also accepts names of existing top\-level data files in
<walletdir>.
.HP
\fB\-walletbackupsdir=\fR<dir>
.IP
Specify full path to directory for automatic wallet backups (must exist)
.HP
\fB\-walletbroadcast\fR
.IP
Make the wallet broadcast transactions (default: 1)
.HP
\fB\-walletdir=\fR<dir>
.IP
Specify directory to hold wallets (default: <datadir>/wallets if it
exists, otherwise <datadir>)
.HP
\fB\-walletnotify=\fR<cmd>
.IP
Execute command when a wallet transaction changes. %s in cmd is replaced
by TxID, %w is replaced by wallet name, %b is replaced by the
hash of the block including the transaction (set to 'unconfirmed'
if the transaction is not included) and %h is replaced by the
block height (\fB\-1\fR if not included). %w is not currently
implemented on windows. On systems where %w is supported, it
should NOT be quoted because this would break shell escaping used
to invoke the command.
.PP
Wallet fee options:
.HP
\fB\-discardfee=\fR<amt>
.IP
The fee rate (in DASH/kB) that indicates your tolerance for discarding
change by adding it to the fee (default: 0.0001). Note: An output
is discarded if it is dust at this rate, but we will always
discard up to the dust relay fee and a discard fee above that is
limited by the fee estimate for the longest target
.HP
\fB\-fallbackfee=\fR<amt>
.IP
A fee rate (in DASH/kB) that will be used when fee estimation has
insufficient data. 0 to entirely disable the fallbackfee feature.
(default: 0.00001)
.HP
\fB\-mintxfee=\fR<amt>
.IP
Fee rates (in DASH/kB) smaller than this are considered zero fee for
transaction creation (default: 0.00001)
.HP
\fB\-paytxfee=\fR<amt>
.IP
Fee rate (in DASH/kB) to add to transactions you send (default: 0.00)
.HP
\fB\-txconfirmtarget=\fR<n>
.IP
If paytxfee is not set, include enough fee so transactions begin
confirmation on average within n blocks (default: 6)
.PP
HD wallet options:
.HP
\fB\-hdseed=\fR<hex>
.IP
User defined seed for HD wallet (should be in hex). Only has effect
during wallet creation/first start (default: randomly generated)
.HP
\fB\-mnemonic=\fR<text>
.IP
User defined mnemonic for HD wallet (bip39). Only has effect during
wallet creation/first start (default: randomly generated)
.HP
\fB\-mnemonicbits=\fR<n>
.IP
User defined mnemonic security for HD wallet in bits (BIP39). Only has
effect during wallet creation/first start (allowed values: 128,
160, 192, 224, 256; default: 128)
.HP
\fB\-mnemonicpassphrase=\fR<text>
.IP
User defined mnemonic passphrase for HD wallet (BIP39). Only has effect
during wallet creation/first start (default: empty string)
.HP
\fB\-usehd\fR
.IP
Use hierarchical deterministic key generation (HD) after BIP39/BIP44.
Only has effect during wallet creation/first start (default: 1)
.PP
CoinJoin options:
.HP
\fB\-coinjoinamount=\fR<n>
.IP
Target CoinJoin balance (2\-21000000, default: 1000)
.HP
\fB\-coinjoinautostart\fR
.IP
Start CoinJoin automatically (0\-1, default: 0)
.HP
\fB\-coinjoindenomsgoal=\fR<n>
.IP
Try to create at least N inputs of each denominated amount (10\-100000,
default: 50)
.HP
\fB\-coinjoindenomshardcap=\fR<n>
.IP
Create up to N inputs of each denominated amount (10\-100000, default:
300)
.HP
\fB\-coinjoinmultisession\fR
.IP
Enable multiple CoinJoin mixing sessions per block, experimental (0\-1,
default: 0)
.HP
\fB\-coinjoinrounds=\fR<n>
.IP
Use N separate masternodes for each denominated input to mix funds
(2\-16, default: 4)
.HP
\fB\-coinjoinsessions=\fR<n>
.IP
Use N separate masternodes in parallel to mix funds (1\-10, default: 4)
.HP
\fB\-enablecoinjoin\fR
.IP
Enable use of CoinJoin for funds stored in this wallet (0\-1, default: 0)
.PP
ZeroMQ notification options:
.HP
\fB\-zmqpubhashblock=\fR<address>
.IP
Enable publish hash block in <address>
.HP
\fB\-zmqpubhashblockhwm=\fR<n>
.IP
Set publish hash block outbound message high water mark (default: 1000)
.HP
\fB\-zmqpubhashchainlock=\fR<address>
.IP
Enable publish hash block (locked via ChainLocks) in <address>
.HP
\fB\-zmqpubhashchainlockhwm=\fR<n>
.IP
Set publish hash chain lock outbound message high water mark (default:
1000)
.HP
\fB\-zmqpubhashgovernanceobject=\fR<address>
.IP
Enable publish hash of governance objects (like proposals) in <address>
.HP
\fB\-zmqpubhashgovernanceobjecthwm=\fR<n>
.IP
Set publish hash governance object outbound message high water mark
(default: 1000)
.HP
\fB\-zmqpubhashgovernancevote=\fR<address>
.IP
Enable publish hash of governance votes in <address>
.HP
\fB\-zmqpubhashgovernancevotehwm=\fR<n>
.IP
Set publish hash governance vote outbound message high water mark
(default: 1000)
.HP
\fB\-zmqpubhashinstantsenddoublespend=\fR<address>
.IP
Enable publish transaction hashes of attempted InstantSend double spend
in <address>
.HP
\fB\-zmqpubhashinstantsenddoublespendhwm=\fR<n>
.IP
Set publish hash InstantSend double spend outbound message high water
mark (default: 1000)
.HP
\fB\-zmqpubhashrecoveredsig=\fR<address>
.IP
Enable publish message hash of recovered signatures (recovered by LLMQs)
in <address>
.HP
\fB\-zmqpubhashrecoveredsighwm=\fR<n>
.IP
Set publish hash recovered signature outbound message high water mark
(default: 1000)
.HP
\fB\-zmqpubhashtx=\fR<address>
.IP
Enable publish hash transaction in <address>
.HP
\fB\-zmqpubhashtxhwm=\fR<n>
.IP
Set publish hash transaction outbound message high water mark (default:
1000)
.HP
\fB\-zmqpubhashtxlock=\fR<address>
.IP
Enable publish hash transaction (locked via InstantSend) in <address>
.HP
\fB\-zmqpubhashtxlockhwm=\fR<n>
.IP
Set publish hash transaction lock outbound message high water mark
(default: 1000)
.HP
\fB\-zmqpubrawblock=\fR<address>
.IP
Enable publish raw block in <address>
.HP
\fB\-zmqpubrawblockhwm=\fR<n>
.IP
Set publish raw block outbound message high water mark (default: 1000)
.HP
\fB\-zmqpubrawchainlock=\fR<address>
.IP
Enable publish raw block (locked via ChainLocks) in <address>
.HP
\fB\-zmqpubrawchainlockhwm=\fR<n>
.IP
Set publish raw chain lock outbound message high water mark (default:
1000)
.HP
\fB\-zmqpubrawchainlocksig=\fR<address>
.IP
Enable publish raw block (locked via ChainLocks) and CLSIG message in
<address>
.HP
\fB\-zmqpubrawchainlocksighwm=\fR<n>
.IP
Set publish raw chain lock signature outbound message high water mark
(default: 1000)
.HP
\fB\-zmqpubrawgovernanceobject=\fR<address>
.IP
Enable publish raw governance votes in <address>
.HP
\fB\-zmqpubrawgovernanceobjecthwm=\fR<n>
.IP
Set publish raw governance object outbound message high water mark
(default: 1000)
.HP
\fB\-zmqpubrawgovernancevote=\fR<address>
.IP
Enable publish raw governance objects (like proposals) in <address>
.HP
\fB\-zmqpubrawgovernancevotehwm=\fR<n>
.IP
Set publish raw governance vote outbound message high water mark
(default: 1000)
.HP
\fB\-zmqpubrawinstantsenddoublespend=\fR<address>
.IP
Enable publish raw transactions of attempted InstantSend double spend in
<address>
.HP
\fB\-zmqpubrawinstantsenddoublespendhwm=\fR<n>
.IP
Set publish raw InstantSend double spend outbound message high water
mark (default: 1000)
.HP
\fB\-zmqpubrawrecoveredsig=\fR<address>
.IP
Enable publish raw recovered signatures (recovered by LLMQs) in
<address>
.HP
\fB\-zmqpubrawrecoveredsighwm=\fR<n>
.IP
Set publish raw recovered signature outbound message high water mark
(default: 1000)
.HP
\fB\-zmqpubrawtx=\fR<address>
.IP
Enable publish raw transaction in <address>
.HP
\fB\-zmqpubrawtxhwm=\fR<n>
.IP
Set publish raw transaction outbound message high water mark (default:
1000)
.HP
\fB\-zmqpubrawtxlock=\fR<address>
.IP
Enable publish raw transaction (locked via InstantSend) in <address>
.HP
\fB\-zmqpubrawtxlockhwm=\fR<n>
.IP
Set publish raw transaction lock outbound message high water mark
(default: 1000)
.HP
\fB\-zmqpubrawtxlocksig=\fR<address>
.IP
Enable publish raw transaction (locked via InstantSend) and ISLOCK in
<address>
.HP
\fB\-zmqpubrawtxlocksighwm=\fR<n>
.IP
Set publish raw transaction lock signature outbound message high water
mark (default: 1000)
.HP
\fB\-zmqpubsequence=\fR<address>
.IP
Enable publish hash block and tx sequence in <address>
.HP
\fB\-zmqpubsequencehwm=\fR<n>
.IP
Set publish hash sequence message high water mark (default: 1000)
.PP
Debugging/Testing options:
.HP
\fB\-debug=\fR<category>
.IP
Output debugging information (default: \fB\-nodebug\fR, supplying <category> is
optional). If <category> is not supplied or if <category> = 1,
output all debugging information. <category> can be: addrman,
bench, chainlocks, cmpctblock, coindb, coinjoin, creditpool, ehf,
estimatefee, gobject, http, i2p, instantsend, ipc, leveldb,
libevent, llmq, llmq\-dkg, llmq\-sigs, lock, mempool, mempoolrej,
mnpayments, mnsync, net, netconn, proxy, prune, qt, rand,
reindex, rpc, selectcoins, spork, tor, txreconciliation,
validation, walletdb, zmq. This option can be specified multiple
times to output multiple categories.
.HP
\fB\-debugexclude=\fR<category>
.IP
Exclude debugging information for a category. Can be used in conjunction
with \fB\-debug\fR=\fI\,1\/\fR to output debug logs for all categories except the
specified category. This option can be specified multiple times
to exclude multiple categories.
.HP
\fB\-disablegovernance\fR
.IP
Disable governance validation (0\-1, default: 0)
.HP
\fB\-help\-debug\fR
.IP
Print help message with debugging options and exit
.HP
\fB\-logips\fR
.IP
Include IP addresses in debug output (default: 0)
.HP
\fB\-logsourcelocations\fR
.IP
Prepend debug output with name of the originating source location
(source file, line number and function name) (default: 0)
.HP
\fB\-logtimestamps\fR
.IP
Prepend debug output with timestamp (default: 1)
.HP
\fB\-maxtxfee=\fR<amt>
.IP
Maximum total fees (in DASH) to use in a single wallet transaction;
setting this too low may abort large transactions (default: 0.10)
.HP
\fB\-minsporkkeys=\fR<n>
.IP
Overrides minimum spork signers to change spork value. Only useful for
regtest and devnet. Using this on mainnet or testnet will ban
you.
.HP
\fB\-printtoconsole\fR
.IP
Send trace/debug info to console (default: 1 when no \fB\-daemon\fR. To disable
logging to file, set \fB\-nodebuglogfile\fR)
.HP
\fB\-pushversion\fR
.IP
Protocol version to report to other nodes
.HP
\fB\-shrinkdebugfile\fR
.IP
Shrink debug.log file on client startup (default: 1 when no \fB\-debug\fR)
.HP
\fB\-sporkaddr=\fR<dashaddress>
.IP
Override spork address. Only useful for regtest and devnet. Using this
on mainnet or testnet will ban you.
.HP
\fB\-sporkkey=\fR<privatekey>
.IP
Set the private key to be used for signing spork messages.
.HP
\fB\-uacomment=\fR<cmt>
.IP
Append comment to the user agent string
.PP
Chain selection options:
.HP
\fB\-chain=\fR<chain>
.IP
Use the chain <chain> (default: main). Allowed values: main, test,
regtest
.HP
\fB\-devnet=\fR<name>
.IP
Use devnet chain with provided name
.HP
\fB\-highsubsidyblocks=\fR<n>
.IP
The number of blocks with a higher than normal subsidy to mine at the
start of a chain. Block after that height will have fixed subsidy
base. (default: 0, devnet\-only)
.HP
\fB\-highsubsidyfactor=\fR<n>
.IP
The factor to multiply the normal block subsidy by while in the
highsubsidyblocks window of a chain (default: 1, devnet\-only)
.HP
\fB\-llmqchainlocks=\fR<quorum name>
.IP
Override the default LLMQ type used for ChainLocks. Allows using
ChainLocks with smaller LLMQs. (default: llmq_devnet,
devnet\-only)
.HP
\fB\-llmqdevnetparams=\fR<size>:<threshold>
.IP
Override the default LLMQ size for the LLMQ_DEVNET quorum (devnet\-only)
.HP
\fB\-llmqinstantsenddip0024=\fR<quorum name>
.IP
Override the default LLMQ type used for InstantSendDIP0024. (default:
llmq_devnet_dip0024, devnet\-only)
.HP
\fB\-llmqmnhf=\fR<quorum name>
.IP
Override the default LLMQ type used for EHF. (default: llmq_devnet,
devnet\-only)
.HP
\fB\-llmqplatform=\fR<quorum name>
.IP
Override the default LLMQ type used for Platform. (default:
llmq_devnet_platform, devnet\-only)
.HP
\fB\-minimumdifficultyblocks=\fR<n>
.IP
The number of blocks that can be mined with the minimum difficulty at
the start of a chain (default: 0, devnet\-only)
.HP
\fB\-powtargetspacing=\fR<n>
.IP
Override the default PowTargetSpacing value in seconds (default: 2.5
minutes, devnet\-only)
.HP
\fB\-testnet\fR
.IP
Use the test chain. Equivalent to \fB\-chain\fR=\fI\,test\/\fR
.PP
Node relay options:
.HP
\fB\-bytespersigop\fR
.IP
Equivalent bytes per sigop in transactions for relay and mining
(default: 20)
.HP
\fB\-datacarrier\fR
.IP
Relay and mine data carrier transactions (default: 1)
.HP
\fB\-datacarriersize\fR
.IP
Maximum size of data in data carrier transactions we relay and mine
(default: 83)
.HP
\fB\-minrelaytxfee=\fR<amt>
.IP
Fees (in DASH/kB) smaller than this are considered zero fee for
relaying, mining and transaction creation (default: 0.00001)
.HP
\fB\-whitelistforcerelay\fR
.IP
Add 'forcerelay' permission to whitelisted inbound peers with default
permissions. This will relay transactions even if the
transactions were already in the mempool. (default: 0)
.HP
\fB\-whitelistrelay\fR
.IP
Add 'relay' permission to whitelisted inbound peers with default
permissions. This will accept relayed transactions even when not
relaying transactions (default: 1)
.PP
Block creation options:
.HP
\fB\-blockmaxsize=\fR<n>
.IP
Set maximum block size in bytes (default: 2000000)
.HP
\fB\-blockmintxfee=\fR<amt>
.IP
Set lowest fee rate (in DASH/kB) for transactions to be included in
block creation. (default: 0.00001)
.PP
RPC server options:
.HP
\fB\-rest\fR
.IP
Accept public REST requests (default: 0)
.HP
\fB\-rpcallowip=\fR<ip>
.IP
Allow JSON\-RPC connections from specified source. Valid for <ip> are a
single IP (e.g. 1.2.3.4), a network/netmask (e.g.
1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This
option can be specified multiple times
.HP
\fB\-rpcauth=\fR<userpw>
.IP
Username and HMAC\-SHA\-256 hashed password for JSON\-RPC connections. The
field <userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A
canonical python script is included in share/rpcuser. The client
then connects normally using the
rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This
option can be specified multiple times
.HP
\fB\-rpcbind=\fR<addr>[:port]
.IP
Bind to given address to listen for JSON\-RPC connections. Do not expose
the RPC server to untrusted networks such as the public internet!
This option is ignored unless \fB\-rpcallowip\fR is also passed. Port is
optional and overrides \fB\-rpcport\fR. Use [host]:port notation for
IPv6. This option can be specified multiple times (default:
127.0.0.1 and ::1 i.e., localhost, or if \fB\-rpcallowip\fR has been
specified, 0.0.0.0 and :: i.e., all addresses)
.HP
\fB\-rpccookiefile=\fR<loc>
.IP
Location of the auth cookie. Relative paths will be prefixed by a
net\-specific datadir location. (default: data dir)
.HP
\fB\-rpcexternaluser=\fR<users>
.IP
List of comma\-separated usernames for JSON\-RPC external connections
.HP
\fB\-rpcpassword=\fR<pw>
.IP
Password for JSON\-RPC connections
.HP
\fB\-rpcport=\fR<port>
.IP
Listen for JSON\-RPC connections on <port> (default: 9998, testnet:
19998, regtest: 19898)
.HP
\fB\-rpcthreads=\fR<n>
.IP
Set the number of threads to service RPC calls (default: 4)
.HP
\fB\-rpcuser=\fR<user>
.IP
Username for JSON\-RPC connections
.HP
\fB\-rpcwhitelist=\fR<whitelist>
.IP
Set a whitelist to filter incoming RPC calls for a specific user. The
field <whitelist> comes in the format: <USERNAME>:<rpc 1>,<rpc
2>,...,<rpc n>. If multiple whitelists are set for a given user,
they are set\-intersected. See \fB\-rpcwhitelistdefault\fR documentation
for information on default whitelist behavior.
.HP
\fB\-rpcwhitelistdefault\fR
.IP
Sets default behavior for rpc whitelisting. Unless rpcwhitelistdefault
is set to 0, if any \fB\-rpcwhitelist\fR is set, the rpc server acts as
if all rpc users are subject to empty\-unless\-otherwise\-specified
whitelists. If rpcwhitelistdefault is set to 1 and no
\fB\-rpcwhitelist\fR is set, rpc server acts as if all rpc users are
subject to empty whitelists.
.HP
\fB\-server\fR
.IP
Accept command line and JSON\-RPC commands
.PP
UI Options:
.HP
\fB\-choosedatadir\fR
.IP
Choose data directory on startup (default: 0)
.HP
\fB\-custom\-css\-dir\fR
.IP
Set a directory which contains custom css files. Those will be used as
stylesheets for the UI.
.HP
\fB\-font\-family\fR
.IP
Set the font family. Possible values: SystemDefault, Montserrat.
(default: SystemDefault)
.HP
\fB\-font\-scale\fR
.IP
Set a scale factor which gets applied to the base font size. Possible
range \fB\-100\fR (smallest fonts) to 100 (largest fonts). (default: 0)
.HP
\fB\-font\-weight\-bold\fR
.IP
Set the font weight for bold texts. Possible range 0 to 8 (default: 4)
.HP
\fB\-font\-weight\-normal\fR
.IP
Set the font weight for normal texts. Possible range 0 to 8 (default: 2)
.HP
\fB\-lang=\fR<lang>
.IP
Set language, for example "de_DE" (default: system locale)
.HP
\fB\-min\fR
.IP
Start minimized
.HP
\fB\-resetguisettings\fR
.IP
Reset all settings changed in the GUI
.HP
\fB\-splash\fR
.IP
Show splash screen on startup (default: 1)
.HP
\fB\-windowtitle=\fR<name>
.IP
Sets a window title which is appended to "Dash Core \- "