This adds the reading side of a pipe to the read-set when calling select().
Writing to the writing side of the pipe then causes select() to wake up
immediately. Otherwise it would wait for the timeout of 50ms, even if there
is data that could possibly be sent.
This is useful when many messages need are pushed with optimistic send being
disabled. After all messages have been pushed, WakeSelect() can then wakeup
the select() thread and force a re-check for pending data to send.
This is currently only implemented for POSIX compliant systems as we assume
that heavy-load daemons (like masternodes) are usually run on Linux.
Profiling has shown that optimistic send causes measurable slowdowns when
many messages are pushed, even if the sockets are non-blocking. Better to
allow disabling of optimistic sending in such cases and let the network
thread do the actual socket calls.
* check request is not empty to use it for filtering
* Filter vote INVs by tx hash
* fix lock requests filtering
* Apply suggestions from code review
Co-Authored-By: gladcow <sergey@dash.org>
* Implement RemoveAskFor to indicate that we're not interested in an item anymore
When an INV item is received from the first node, the item is requested
immediately. If the same item is received from another node, an entry is
added to mapAskFor which marks the item for re-requesting in case the first
node did not respond. When the item is received from the first node,
the item was previously never removed from mapAskFor. Only the later getdata
loop in SendMessages would then gradually remove items from the map. This
is quite delayed however as the entries in mapAskFor have a timeout value.
RemoveAskFor allows to remove all entries from mapAskFor and setAskFor
when we are not interested in the item anymore (e.g. because we received
it already).
* Call RemoveAskFor whenever we receive a message
* Only pass hash instead of CInv object to RemoveAskFor
* Split PS into Manager and Session
* Adjust log messages accordingly
* add -privatesendsessions cmd-line option
* address review comments
* bump MAX_OUTBOUND_MASTERNODE_CONNECTIONS to 30
+10 for parallel mixing
* protect vecSessions
* constructors
* Rewrite CMasternodeMan::ProcessMasternodeConnections() to use CPrivateSendClientManager::GetMixingMasternodesInfo().
This should solve potential deadlock cs_vecqueue vs cs_vNodes.
* Drop no longer used IsMixingMasternode()
* lock cs_wallet when mixing uses balance related functions
* Drop custom logic for delaying GETHEADERS
Reverts "Fix duplicate headers download in initial sync (#1589)" and all following fixes
This reverts commit 169afafd50.
* Fix duplicate initial headers sync
* Remove unnecessary LOCK in ConnectNode
FindNode already does the necessary lock
* Remove unnecessary semicolon
* Remove critical section and assert for ref counts in CNode
nRefCount is an atomic now and thus doesn't need locking anymore.
* Do not send dash-specific requests to masternodes before we are fully connected
Open all masternode connections via CConnman::ThreadOpenMasternodeConnections only. Queue requests and process them after some timeout.
* drop excessive `mnodeman.`
* switch from queues to maps of pending requests
* adjust few strings, add TODO for POOL_STATE_CONNECTING
* fix
* there can be only one pending dsa request per ps client
0729102 Net: pass interruptMsgProc as const where possible (Jorge Timón)
fc7f2ff Net: Make CNetMsgMaker more const (Jorge Timón)
d45955f Net: CConnman: Make some methods const (Jorge Timón)
And use this where needed. This avoids warnings about unset version fields
and is also generally a good thing (we really should only communicate with
nodes we know are good)
376b3c2 Make the cs_sendProcessing a LOCK instead of a TRY_LOCK (Matt Corallo)
d7c58ad Split CNode::cs_vSend: message processing and message sending (Matt Corallo)
032ba3f RPC help documentation for addnode peerinfo. (Gregory Maxwell)
90f13e1 Add release notes for addnode changes. (Gregory Maxwell)
50bd12c Break addnode out from the outbound connection limits. (Gregory Maxwell)
c7be56d net: push only raw data into CConnman (Cory Fields)
2ec935d net: add CVectorWriter and CNetMsgMaker (Cory Fields)
b7695c2 net: No need to check individually for disconnection anymore (Cory Fields)
fedea8a net: don't send any messages before handshake or after requested disconnect (Cory Fields)
d74e352 net: Set feelers to disconnect at the end of the version message (Cory Fields)
ConnectNode is meant to be private and should not be leaked outside of
CConnman. This leaking resulted in multiple problems with AddRef/Release
behaviour. We use OpenNetworkConnectio/OpenMasternodeConnection from now on
and use appropriate ForNode calls to access the CNode* instance.
This commit also changes the behaviour for already connected nodes which
are afterwards requested for a masternode connection. We don't set
fMasternode=true anymore on such nodes, which means it won't be auto
disconnected anymore from ProcessMasternodeConnections.
d59a518 Use fixed preallocation instead of costly GetSerializeSize (Pieter Wuille)
25a211a Add optimized CSizeComputer serializers (Pieter Wuille)
a2929a2 Make CSerAction's ForRead() constexpr (Pieter Wuille)
a603925 Avoid -Wshadow errors (Pieter Wuille)
5284721 Get rid of nType and nVersion (Pieter Wuille)
657e05a Make GetSerializeSize a wrapper on top of CSizeComputer (Pieter Wuille)
fad9b66 Make nType and nVersion private and sometimes const (Pieter Wuille)
c2c5d42 Make streams' read and write return void (Pieter Wuille)
50e8a9c Remove unused ReadVersion and WriteVersion (Pieter Wuille)
59ac5c5 net: Use deterministic randomness for CNode's nonce, and make it const (Cory Fields)
aff6584 net: constify a few CNode vars to indicate that they're threadsafe (Cory Fields)
eebc232 test: Add more test vectors for siphash (Wladimir J. van der Laan)
8884830 Use C++11 thread-safe static initializers (Pieter Wuille)
c31b24f Use 64-bit SipHash of netgroups in eviction (Pieter Wuille)
9bf156b Support SipHash with arbitrary byte writes (Pieter Wuille)
053930f Avoid recalculating vchKeyedNetGroup in eviction logic. (Patrick Strateman)
6182d10 Do not increment nAttempts by more than one for every Good connection. (Gregory Maxwell)
c769c4a Avoid counting failed connect attempts when probably offline. (Gregory Maxwell)
Bitcoin #7840 has split the INVs to send into block and TX and completely
ignores non-tx/non-block items in PushInventory. This is fine for Bitcoin,
as they only use it for blocks and TXs, but we also have a lot of MN related
messages which also need to be relayed.
b559914 Move bloom and feerate filtering to just prior to tx sending. (Gregory Maxwell)
4578215 Return mempool queries in dependency order (Pieter Wuille)
ed70683 Handle mempool requests in send loop, subject to trickle (Pieter Wuille)
dc13dcd Split up and optimize transaction and block inv queues (Pieter Wuille)
f2d3ba7 Eliminate TX trickle bypass, sort TX invs for privacy and priority. (Gregory Maxwell)
* Merge #8996: Network activity toggle
19f46f1 Qt: New network_disabled icon (Luke Dashjr)
54cf997 RPC/Net: Use boolean consistently for networkactive, and remove from getinfo (Luke Dashjr)
b2b33d9 Overhaul network activity toggle (Jonas Schnelli)
32efa79 Qt: Add GUI feedback and control of network activity state. (Jon Lund Steffensen)
e38993b RPC: Add "togglenetwork" method to toggle network activity temporarily (Jon Lund Steffensen)
7c9a98a Allow network activity to be temporarily suspended. (Jon Lund Steffensen)
* Revert on-click behavior of network status icon to showing peers list
Stay with the way Dash handled clicking on the status icon
* Add theme support for network disabled icon
* Merge #8874: Multiple Selection for peer and ban tables
1077577 Fix auto-deselection of peers (Andrew Chow)
addfdeb Multiple Selection for peer and ban tables (Andrew Chow)
* Merge #9190: qt: Plug many memory leaks
ed998ea qt: Avoid OpenSSL certstore-related memory leak (Wladimir J. van der Laan)
5204598 qt: Avoid shutdownwindow-related memory leak (Wladimir J. van der Laan)
e4f126a qt: Avoid splash-screen related memory leak (Wladimir J. van der Laan)
693384e qt: Prevent thread/memory leak on exiting RPCConsole (Wladimir J. van der Laan)
47db075 qt: Plug many memory leaks (Wladimir J. van der Laan)
* Merge #9218: qt: Show progress overlay when clicking spinner icon
042f9fa qt: Show progress overlay when clicking spinner icon (Wladimir J. van der Laan)
827d9a3 qt: Replace NetworkToggleStatusBarControl with generic ClickableLabel (Wladimir J. van der Laan)
* Merge #9266: Bugfix: Qt/RPCConsole: Put column enum in the right places
df17fe0 Bugfix: Qt/RPCConsole: Put column enum in the right places (Luke Dashjr)
* Merge #9255: qt: layoutAboutToChange signal is called layoutAboutToBeChanged
f36349e qt: Remove on_toggleNetworkActiveButton_clicked from RPCConsole (Wladimir J. van der Laan)
297cc20 qt: layoutAboutToChange signal is called layoutAboutToBeChanged (Wladimir J. van der Laan)
* Use UniValue until bitcoin PR #8788 is backported
Network active toggle was already based on
"[RPC] Give RPC commands more information about the RPC request"
We need to use the old UniValue style until that one is backported
* Merge #8906: [qt] sync-overlay: Don't show progress twice
fafeec3 [qt] sync-overlay: Don't show progress twice (MarcoFalke)
* Merge #8985: Use pindexBestHeader instead of setBlockIndexCandidates for NotifyHeaderTip()
3154d6e [Qt] use NotifyHeaderTip's height and date for the progress update (Jonas Schnelli)
0a261b6 Use pindexBestHeader instead of setBlockIndexCandidates for NotifyHeaderTip() (Jonas Schnelli)
* Merge #9280: [Qt] Show ModalOverlay by pressing the progress bar, allow hiding
89a3723 [Qt] Show ModalOverlay by pressing the progress bar, disabled show() in sync mode (Jonas Schnelli)
* Merge #9461: [Qt] Improve progress display during headers-sync and peer-finding
40ec7c7 [Qt] Improve progress display during headers-sync and peer-finding (Jonas Schnelli)
* Merge #9588: qt: Use nPowTargetSpacing constant
fa4d478 qt: Use nPowTargetSpacing constant (MarcoFalke)
* Hide modal overlay forever when syncing has catched up
Don't allow to open it again by clicking on the progress bar and spinner
icon. Currently the overlay does not show meaningful information about
masternode sync and it gives the impression of being stuck after the block
chain sync is done.
* Don't include chainparams.h in sendcoinsdialog.cpp
This was just a remainder of a backported PR which meant to change some
calculation in this file which does not apply to Dash.
* Also check for fNetworkActive in ConnectNode
* Merge #9528: [qt] Rename formateNiceTimeOffset(qint64) to formatNiceTimeOffset(qint64)
988d300 [qt] Rename formateNiceTimeOffset(qint64) to formatNiceTimeOffset(qint64) (practicalswift)
* Merge #11237: qt: Fixing division by zero in time remaining
c8d38abd6 Refactor tipUpdate as per style guide (MeshCollider)
3b69a08c5 Fix division by zero in time remaining (MeshCollider)
Pull request description:
Fixes https://github.com/bitcoin/bitcoin/issues/10291, https://github.com/bitcoin/bitcoin/issues/11265
progressDelta may be 0 (or even negative according to 11265), this checks for that and prints unknown if it is, because we cannot calculate an estimate for the time remaining (would be infinite or negative).
Tree-SHA512: bc5708e5ed6e4670d008219558c5fbb25709bd99a32c98ec39bb74f94a0b7fa058f3d03389ccdd39e6723e6b5b48e34b13ceee7c051c2db631e51d8ec3e1d68c
