* Remove ppszTypeName from protocol.cpp and reimplement GetCommand
This removes the need to carefully maintain ppszTypeName, which required
correct order and also did not allow to permanently remove old message
types.
To get the command name for an INV type, GetCommandInternal uses a switch
which needs to be maintained from now on.
The way this is implemented also resembles the way it is implemented in
Bitcoin today, but it's not identical. The original PR that introduced the
switch case in Bitcoin was part of the Segwit changes and thus never got
backported. I decided to implement it in a slightly different way that
avoids throwing exceptions when an unknown INV type is encountered.
IsKnownType will now also leverage GetCommandInternal() to figure out if
the INV type is known locally. This has the side effect of old/legacy
message types to return false from now on. We will depend on this side
effect in later commits when we remove legacy InstantSend code.
* Stop handling/relaying legacy IX messages
When we receive an IX message, we simply treat it as a regular TX and relay
it as such.
We'll however still request IX messages when they are announced to us. We
can't simply revert to requesting TX messages in this case as it might
result in the other peer not answering due to the TX not being in mapRelay
yet. We should at some point in the future completely drop handling of IX
messages instead.
* Remove IsNewInstantSendEnabled() and only use IsInstantSendEnabled()
* Remove legacy InstantSend from GUI
* Remove InstantSend from Bitcoin/Dash URIs
* Remove legacy InstantSend from RPC commands
* Remove legacy InstantSend from wallet
* Remove legacy instantsend.h include
* Remove legacy InstantSend from validation code
* Completely remove remaining legacy InstantSend code
* Remove now unused spork
* Fix InstantSend related test failures
* Remove now obsolete auto IS tests
* Make spork2 and spork3 disabled by default
This should have no influence on mainnet as these sporks are actually set
there. This will however affect regtest, which shouldn't have LLMQ based
InstantSend enabled by default.
* Remove instantsend tests from dip3-deterministicmns.py
These were only testing legacy InstantSend
* Fix .QCheckBox#checkUsePrivateSend styling a bit
* s/TXLEGACYLOCKREQUEST/LEGACYTXLOCKREQUEST/
* Revert "verified via InstantSend" back to "verified via LLMQ based InstantSend"
* Use cmd == nullptr instead of !cmd
* Remove last parameter from AvailableCoins call
This was for fUseInstantSend which is not present anymore since rebase
And for llmq5_60, set it to 3 instead of 24 (which was incorrect from the
beginning).
Increasing all LLMQs "keepOldConnections" by one is required because we
don't use the tip when scanning active quorums, but a block that is 8 blocks
in the past. This however means that we need to keep connections for one
additional quorum alive.
This fixes an issue with signing sessions randomly failing with timeouts.
* Harden DIP3 activation height
Also drop all related but no longer used parts.
* Pass current block index to GetCommitmentsFromBlock
* Allow to change dip3 activation height for tests
And fix them.
* Require only 3 out of 5 signatures for old InstantSend in regtest mode
* Use LLMQs of size 5 with threshold of 3 for regtest
* Fix wrong check for out-of-range bits in CFixedBitSet
* Reduce number of masternodes in masternode/LLMQ tests
* Add missing \n to LogPrintf call
* Use correct indexes for isolated/receiver/sender nodes
The way it was before resulted in nodes 1-3 being unused and 6-8 being used
for these 3 special nodes even though these are masternodes.
* Avoid stopping/starting isolated node in p2p-instantsend.py
It's enough to disable networking for this node.
Instead of trying to manually figure out params for different quorum/ring sizes, connect to nodes at indexes (i+2^k)%n where k: 0..floor(log2(n-1))-1, n: size of the quorum/ring
* Replace IsDeterministicMNsSporkActive with IsDIP3Active
IsDIP3Active will now use a fixed parameter from consensus params.
Values for DIP0003Height/DIP0003Hash need to be updated when spork15
activates on mainnet.
Also enforce correct block hash on testnet/mainnet for DIP3 activation
block.
* Remove SPORK_15_DETERMINISTIC_MNS_ENABLED
* Replace all uses of IsDeterministicMNsSporkActive with IsDIP3Active
* Remove DIP3 upgrade-path tests and directly start with DIP3 enabled tests
* Make -masternodeprivkey non-mandatory
This code will vanish later.
* Add SPORK_17_QUORUM_DKG_ENABLED spork
* Implement CDummyDKG and CDummyCommitment until we have the real DKG merged
This is only used on testnet/devnet/regtest and will NEVER be used on
mainnet. It is NOT SECURE AT ALL!
See comment in quorums_dummydkg.h for more details.
* Test simple PoSe in DIP3 tests
* Generate 2 instead of 4 blocks per iteration in PoSe tests
4 was based on old chainparams where I used larger phases.
* Only sleep when necessary in PoSe tests
* Fix typo in comment
* Give PoSe tests more time and sync after fast-forward
* Add LLMQ parameters to consensus params
* Add DIP6 quorum commitment special TX
* Implement CQuorumBlockProcessor which validates and handles commitments
* Add quorum commitments to new blocks
* Propagate QFCOMMITMENT messages to all nodes
* Allow special transactions in blocks which have no inputs/outputs
But only for TRANSACTION_QUORUM_COMMITMENT for now.
* Add quorum commitments to self-crafted blocks in DIP3 tests
* Add simple fork logic for current testnet
This should avoid a fork on the current testnet. It only applies to the
current chain which activated DIP3 at height 264000 and block
00000048e6e71d4bd90e7c456dcb94683ae832fcad13e1760d8283f7e89f332f.
When we revert the chain to retest the DIP3 deployment, this fork logic
can be removed again.
* Use quorumVvecHash instead of quorumHash to make null commitments unique
Implementation of https://github.com/dashpay/dips/pull/31
* Re-add quorum commitments after pruning mempool selected blocks
* Refactor CQuorumBlockProcessor::ProcessBlock to have less nested if/else statements
Also add BEGIN/END markers for temporary code.
* Add comments/documentation to LLMQParams
* Move code which determines if a commitment is required into IsCommitmentRequired
This should make the code easier to read and also removes some duplication.
The also changes the error types that are possible from 3 to 2 now. Instead
of having "bad-qc-already-mined" and "bad-qc-not-mining-phase", there is
only "bad-qc-not-allowed" now.
* Use new parameter from consensus parames for the temporary fork
* Properly initialize confirmedHash in CSimplifiedMNListEntry
* Add consensus params for temporary hard-fork on testnet
This hard-fork is required on testnet as we have to fix a few consensus
bugs in DIP3/DIP4. It will also be required to introduce LLMQ commitments
to testnet.
* Add temporary fork-logic for testnet, which sets confirmedHash to null
...before fork activation. Otherwise we'd invalidate all DIP3 blocks on
testnet.
* Bump nTemporaryTestnetForkHeight to 273000
* Add BIP9 parameters for DIP3 deployment on testnet
* Remove autoix BIP9 deployment and reuse DIP3 deployment
* Add BIP9CheckMasternodesUpgraded to chain params
This controls if miners should check for upgraded masternodes first before
adding BIP9 bits to the block version. This only makes sense in network
where masternodes are up and running before BIP9 activation, which is not
necessarely the case in regtest and devnet.
Also refactor ComputeBlockVersion to use fCheckMasternodesUpgraded instead
of the inverse fAssumeMasternodeIsUpgraded. It is set to false by default
and only set to true in CreateNewBlock.
* Check for upgraded masternodes for DIP3 activation (only mainnet and testnet)
* Bump PROTOCOL_VERSION and DMN_PROTO_VERSION
We probably have nodes with 70211 already running on testnet.
* Allow to use low difficulty and higher block rewards for devnet
Configurable through -minimumdifficultyblocks, -highsubsidyblocks and -highsubsidyfactor
* Fix review comments
* Handle review comments
* add locktransaction rpc call
* Remove special instantsend fee for simple transactions
* Function to check if trx is simple enough to be autolocked
* Automatic lock for all received from peers simple trxes
If we get a new transaction with CInv message and it is "simple" and
is accepted in mempool, we initiate its lock. We don't lock orphan trxes
that accepted in mempool after this trx because they are locked by other
peers.
* Automatically lock simple trxes in wallet
* protocol bump for InstantSend without special fee
* Add function to detect used mempool share
* Mempool threshold for auto IX locks
* Add SPORK_16_INSTANTSEND_AUTOLOCKS spork
* Make autolocks active only when spork SPORK_16_INSTANTSEND_AUTOLOCKS is active
* BIP9 autolocks activation
* revert increasing min peer protocol version for mn rank
* move IsTrxSimple check to CTxLockRequest class
* make MAX_INPUTS_FOR_AUTO_IX private member of CTxLockRequest class
* make AUTO_IX_MEMPOOL_THRESHOLD private member of CInstantSend class
* remove locktransaction RPC call
* tests for automatic IS locks
* fix mempool threshod calculation
* bump mocktime in activate_autoix_bip9
* set node times
* no need to spam the node with gettransaction rpc requests that often
* use `spork active` instead of leaking spork logic into tests
* codestyle fixes
* add test description in comments
* fix typo
* sync test nodes more often during BIP9 activation
* Use 4th bit in BIP9 activation
* Fix comments according codestyle guide
* Call AcceptLockRequest and Vote at the first node creating autoix lock
* fix mempool used memory calculation
* rallback not necessary change in CWallet::CreateTransaction
* test for stopping autolocks for full mempool
* Inject "simple autolockable" txes into txlockrequest logic
* Drop nBudgetProposalEstablishingTime
* Refactor: replace `== COutPoint()` with `.IsNull()`
* Refactor: add `operator bool()` to CMasternodePing
* Refactor: actually use `operator bool()` for CPendingDsaRequest
* Refactor: fixing code style in TrafficGraphData
* Fix some comments and whitespaces
* Drop CGovernanceVote::GetTypeHash()
* Drop legacy X11 code
No longer used... if it ever was used at all.
* Move `<boost/foreach.hpp>` out of coins.h
* Simplify CMasternodeBlockPayees::GetRequiredPaymentsString()
Also less of boost::lexical_cast
* Drop CTxDSIn::nSentTimes
* Fix few warnings
* fix warning (timer)
* fix nit
* Use Dash block for DeserializeAndCheckBlockTest
Replaced Bitcoin block with the largest Dash block I could find on mainnet.
* Store hashDevnetGenesisBlock in Consensus::Params
Remove the need for chainparams to be available when the devnetGenesis hash
is needed. Fixes a crash in CheckBlockHeader() when called from benchmarking
code, which does not initialize the Params() function.
b4e4ba4 Introduce convenience type CTransactionRef (Pieter Wuille)
1662b43 Make CBlock::vtx a vector of shared_ptr<CTransaction> (Pieter Wuille)
da60506 Add deserializing constructors to CTransaction and CMutableTransaction (Pieter Wuille)
0e85204 Add serialization for unique_ptr and shared_ptr (Pieter Wuille)
fafe7b3 contrib: Make fix-copyright-headers.py more portable (MarcoFalke)
fa27c0a [doc] Fix typos in comments, doxygen: Fix comment syntax (MarcoFalke)
fabfd5d [qa] pull-tester: Don't mute zmq ImportError (MarcoFalke)
67a5502 init: Fix typo in help message for -whitelistforcerelay (Wladimir J. van der Laan)
* IBD check uses minimumchain work instead of checkpoints.
This introduces a 'minimum chain work' chainparam which is intended
to be the known amount of work in the chain for the network at the
time of software release. If you don't have this much work, you're
not yet caught up.
This is used instead of the count of blocks test from checkpoints.
This criteria is trivial to keep updated as there is no element of
subjectivity, trust, or position dependence to it. It is also a more
reliable metric of sync status than a block count.
* Remove GetTotalBlocksEstimate and checkpoint tests that test nothing.
GetTotalBlocksEstimate is no longer used and it was the only thing
the checkpoint tests were testing.
Since checkpoints are on their way out it makes more sense to remove
the test file than to cook up a new pointless test.
# Conflicts:
# src/Makefile.test.include
# src/test/Checkpoints_tests.cpp
* IsInitialBlockDownload no longer uses header-only timestamps.
This avoids a corner case (mostly visible on testnet) where bogus
headers can keep nodes in IsInitialBlockDownload.
* Delay parallel block download until chain has sufficient work
nMinimumChainWork is an anti-DoS threshold; wait until we have a proposed
tip with more work than that before downloading blocks towards that tip.
* Add timeout for headers sync
At startup, we choose one peer to serve us the headers chain, until
our best header is close to caught up. Disconnect this peer if more
than 15 minutes + 1ms/expected_header passes and our best header
is still more than 1 day away from current time.
* Introduce assumevalid setting to skip presumed valid scripts.
This disentangles the script validation skipping from checkpoints.
A new option is introduced "assumevalid" which specifies a block whos
ancestors we assume all have valid scriptsigs and so we do not check
them when they are also burried under the best header by two weeks
worth of work.
Unlike checkpoints this has no influence on consensus unless you set
it to a block with an invalid history. Because of this it can be
easily be updated without risk of influencing the network consensus.
This results in a massive IBD speedup.
This approach was independently recommended by Peter Todd and Luke-Jr
since POW based signature skipping (see PR#9180) does not have the
verifiable properties of a specific hash and may create bad incentives.
The downside is that, like checkpoints, the defaults bitrot and older
releases will sync slower. On the plus side users can provide their
own value here, and if they set it to something crazy all that will
happen is more time will be spend validating signatures.
Checkblocks and checklevel are also moved to the hidden debug options:
Especially now that checkblocks has a low default there is little need
to change these settings, and users frequently misunderstand them as
influencing security or IBD speed. By hiding them we offset the
space added by this new option.
* Add consensusParams to FindNextBlocksToDownload
* Adjust check in headers timeout logic to align with 144 blocks in Dash
* Implement BIP 9 GBT changes
- BIP9DeploymentInfo struct for static deployment info
- VersionBitsDeploymentInfo: Avoid C++11ism by commenting parameter names
- getblocktemplate: Make sure to set deployments in the version if it is LOCKED_IN
- In this commit, all rules are considered required for clients to support
* qa/rpc-tests: bip9-softforks: Add tests for getblocktemplate versionbits updates
* getblocktemplate: Explicitly handle the distinction between GBT-affecting softforks vs not
* getblocktemplate: Use version/force mutation to support pre-BIP9 clients
* Don't use floating point
Github-Pull: #8317
Rebased-From: 477777f2503e3a56a267556f0fc5091042d93340
* Send tip change notification from invalidateblock
This change is needed to prevent sync_blocks timeouts in the mempool_reorg
test after the sync_blocks update in the upcoming commit
"[qa] Change sync_blocks to pick smarter maxheight".
This change was initially suggested by Suhas Daftuar <sdaftuar@chaincode.com>
in https://github.com/bitcoin/bitcoin/pull/8680#r78209060
Github-Pull: #9196
Rebased-From: 67c6326abd1788e6f411feb4f44b69774e76aae2
* torcontrol: Explicitly request RSA1024 private key
When generating a new service key, explicitly request a RSA1024 one.
The bitcoin P2P protocol has no support for the longer hidden service names
that will come with ed25519 keys, until it does, we depend on the old
hidden service type so make this explicit.
See #9214.
Github-Pull: #9234
Rebased-From: 7d3b627395582ae7c9d54ebdbc68096d7042162b
* Bugfix: FRT: don't terminate when keypool is empty
Github-Pull: #9295
Rebased-From: c24a4f5981d47d55aa9e4eb40294832a4d38fb80
* add fundrawtransaction test on a locked wallet with empty keypool
Github-Pull: #9295
Rebased-From: 1a6eacbf3b7e3d5941fec1154079bbc4678ce861
* Multi-quorum InstantSend, complete refactoring
+ cleanup for IS and partial protobump
* more changes:
- allow InstantSend tx to have 10 inputs max
- store many unique tx hashes in mapVotedOutpoints
- more checks in AcceptToMemoryPoolWorker (moved from ProcessMessage + CTxLockRequest(tx).IsValid() )
* More changes:
- let multiple lock candidates compete for votes
- fail to vote on the same outpoint twice early
* More changes:
- notify CInstantSend on UpdatedBlockTip -> remove cs_main from CheckAndRemove()
- notify CInstantSend on SyncTransaction -> count expiration block starting from the block corresponding tx was confirmed instead of the block lock candidate/vote was created
- fixed few locks
* add comments about nConfirmedHeight
* Fix "Block vs Lock" edge case
* Fix "Block vs Lock" edge case, p2
* Fix issues:
- fix logic for locking inputs and notifying - see UpdateLockedTransaction, TryToFinalizeLockCandidate
- add missing hash inserting in ProcessTxLockVote
- add nMaxBlocks param to ResolveConflicts to limit max depth allowed to disconnect blocks recursively
- fix false positive mempool conflict
- add missing mutex locks
- fix fRequireUnspent logic in CTxLockRequest::IsValid
b6b6d6c Added nSuperblockStartBlock, adjusted testnet/regtest params
15a3c64 More for governance block checks, p1 (non-compilable):
- add GetPaymentsLimit() and GetPaymentsTotalAmount()
- IsValidBlockHeight() should check nSuperblockStartBlock
- CSuperblock::IsValid should check payment limit and miner payout
- no cs_main
- slightly refactored related things
e8f9e5d More for governance checks, p2 (compilable):
- IsBlockValueValid(), IsBlockPayeeValid() and FillBlockPayee() rewritten, no cs_main for them
- CreateNewBlock adjusted, need more work on CBlockTemplate (see TODO)
- moved (and simplified) IsBlockPayeeValid() call from CheckBlock() to ConnectBlock()
51434cf Add ability to calculate only superblock part of subsidy in GetBlockSubsidy()
aa74200 Fix GetPaymentsLimit()
f7b6234 braces and comment
ade8f64 more checks for IsValidBlockHeight()
068c178 Added DBG macro in util.h to facilitate debugging
- This macro allows debugging statements (typically printf's or cout's) to
be activated or deactivated with a single comment. Uncomment the line:
//#define ENABLE_DASH_DEBUG
in util.h to enable debugging statements.
- When commented any code wrapped with the DBG() macro will simply be removed
by the preprocessor. When not commented all such wrapped statements will
be present.
- For maximum effectiveness it is best that util.h be the first effective include
in all source files. It is also possible to enable the macro for a single file
by temporarily adding #define ENABLE_DASH_DEBUG to the top of the file.
- Code committed to non-development branches should always have the define
commented.
d125d9b V0.12.1.x -- merging trigger/generic object/superblock changes for testnet phase II
- This commit contains the core governance system changes for 0.12.1. Any unrelated
changes have either been removed or moved to separate commits.
120724c File mode fixes
- Changed mode 0755->0644 on several source files.
c7f9e11 Updated todo reminders
- Added reminder to revert temporary reduction of number of votes
required to trigger superblock to 1 for testing
92adc98 Made CSuperblockManager::IsValidSuperblockHeight an inline function
- This is for efficiency since this function is called often and is
only 1 line of code.
c050ed7 Added comment explaining rationale for no LOCK(cs) in CSuperblock::IsValid
dc933fe Removed unused CSuperblockManager::IsBlockValid function
decec88 Moved calls to SuperblockManager::IsValidSuperblockHeight into IsSuperblockTriggered.
- Since calls to the later function are always protected by the former there's
no reason to keep these separate and this simplifies the code in
masternode-payments.cpp.
8672885 Reestablished expected value check for non-superblocks in IsBlockValueValid
b01cbe0 Changes to IsBlockValueValid to fix rpc test failure
a937c76 Changed include order to allow per file activation of the DBG macro
d116aa5 Fixed IsValidSuperblockHeight logic
- Note this has an effect on testing because we can now only create
1 superblock per day. Devs may need to temporarily change testnet params
for easier testing.
2d0c2de Convert superblock payments to CAmount
- We assume that payment values in JSON are in units of DASH
for consistency with other RPC functions, such as
createrawtransaction.
376b833 Revert temporary testing value for nAbsVoteReq
- Also ensure that number of votes required is never smaller than 1
8c89f4b Cleaned up CSuperblock error handling
- Exceptions are now thrown consistently rather than using a mix of
exceptions and return code checking. Exceptions are now caught only
in AddNewTrigger when the CSuperblock constructor is called. Unnecessary object
status members have been removed.
d7c8a6b Removed utilstrencodings header
- This appears to help with travis tests, for unknown reasons.
c4dfc7a Fixed some minor code review issues
63c3580 Reverted locking change in miner.
- This should have been done in the original PR but was overlooked.
4ab72de Fixed variable name to match common practice and bracket formatting
886a678 Improvements to vote conversion code
- Replaced redundantly defined function with inclusion of governance-vote.h
- Replaced magic numbers with their corresponding constant symbols
0a37966 Reordered governance message handling
