Start the core thread only when needed for initialization
or shutdown.
Avoids a bit of overhead, and also avoids spamming two
log messages before logging is properly initialized.
Add a function `AreBaseParamsConfigured` and use this to check
before writing to the debug log. This avoids assertions when the
application happens to log too early, which happens in the GUI.
Messages logged before the base parameters are configured can be
shown using `-printtoconsole`.
The option is only effective for either wallet-less builds or if
-disablewallet is specified as well.
Rebased-By: Wladimir J. van der Laan <laanwj@gmail.com>
Rebased-From: 34d5fc0 4e1a196 bd4307b d53a33b 7e09b36
Github-Pull: #4286
4eedf4f make RandAddSeed() use OPENSSL_cleanse() (Philip Kaufmann)
6354935 move rand functions from util to new random.h/.cpp (Philip Kaufmann)
001a53d add GetRandBytes() as wrapper for RAND_bytes() (Philip Kaufmann)
An user on IRC reported an issue where `getrawchangeaddress`
keeps returning a single address when the keypool is exhausted.
In my opinion this is strange behaviour.
- Change CReserveKey to fail when running out of keys in the keypool.
- Make `getrawchangeaddress` return RPC_WALLET_KEYPOOL_RAN_OUT when
unable to create an address.
- Add a Python RPC test for checking the keypool behaviour in combination
with encrypted wallets.
This removes some inconsistencies in what worked and didn't work in
safemode. Now only RPCs involved in getting balances or sending
funds are disabled.
Previously you could mine but not submit blocks— but we may need more
blocks to resolve a fork that triggered safe mode in the first place,
and the non-submission was not reliable since some miners submit
blocks via multiple means. There were also a number of random commands
disabled that had nothing to do with the blockchain like verifymessage.
Thanks to earlz for pointing out that there were some moderately cheap
ways to maliciously trigger safe mode, which brought attention to
the fact that safemode wasn't used in a very intelligent way.
This adds a -whitelist option to specify subnet ranges from which peers
that connect are whitelisted. In addition, there is a -whitebind option
which works like -bind, except peers connecting to it are also
whitelisted (allowing a separate listen port for trusted connections).
Being whitelisted has two effects (for now):
* They are immune to DoS disconnection/banning.
* Transactions they broadcast (which are valid) are always relayed,
even if they were already in the mempool. This means that a node
can function as a gateway for a local network, and that rebroadcasts
from the local network will work as expected.
Whitelisting replaces the magic exemption localhost had for DoS
disconnection (local addresses are still never banned, though), which
implied hidden service connects (from a localhost Tor node) were
incorrectly immune to DoS disconnection as well. This old
behaviour is removed for that reason, but can be restored using
-whitelist=127.0.0.1 or -whitelist=::1 can be specified. -whitebind
is safer to use in case non-trusted localhost connections are expected
(like hidden services).
- add a small wrapper in util around RAND_bytes() and replace with
GetRandBytes() in the code to log errors from calling RAND_bytes()
- remove OpenSSL header rand.h where no longer needed
- small changes to Shutdown(), buffer __func__, which is now used in
all LogPrintf() calls and format for better readability
- order using namespace alpabetically
a3e192a replaced MINE_ with ISMINE_ (JaSK)
53a2148 fixed bug where validateaddress doesn't display information (JaSK)
f28707a fixed bug in ListReceived() (JaSK)
519dd1c Added MINE_ALL = (spendable|watchonly) (JaSK)
23b0506 Fixed some stuff in TransactionDesc (JaSK)
80dda36 removed default argument values for ismine filter (JaSK)
d5087d1 Use script matching rather than destination matching for watch-only. (Pieter Wuille)
0fa2f88 added includedWatchonly argument to listreceivedbyaddress/...account (JaSK)
f87ba3d added includeWatchonly argument to 'gettransaction' because it affects balance calculation (JaSK)
a5c6c5d fixed tiny glitch and improved readability like laanwj suggested (JaSK)
d7d5d23 Added argument to listtransactions and listsinceblock to include watchonly addresses (JaSK)
952877e Showing 'involvesWatchonly' property for transactions returned by 'listtransactions' and 'listsinceblock'. It is only appended when the transaction involves a watchonly address. (JaSK)
83f3543 Added argument to listaccounts to include watchonly addresses (JaSK)
d4640d7 Added argument to getbalance to include watchonly addresses and fixed errors in balance calculation. (JaSK)
d2692f6 Watchonly transactions are marked in transaction history (JaSK)
ffd40da Watchonly balances are shown separately in gui. (JaSK)
2935b21 qt: Hide unspendable outputs in coin control (Wladimir J. van der Laan)
c898846 Add support for watch-only addresses (Pieter Wuille)
Get rid of SendMoney and replace it by the functionality of
SendMoneyToDestination. This cleans up the code, since only
SendMoneyToDestination was actually used (SendMoney internally from this
routine).
75f51f2a introduced asynchronous processing for blocks, where reject messages
and DoS scoring could be applied outside of ProcessBlock, because block
validation may happen later.
However, some types of errors are still detected immediately (in particular,
CheckBlock violations), which need acting after ProcessBlock returns.
The wallet now uses the mempool fee estimator with a new
command-line option: -txconfirmtarget (default: 1) instead
of using hard-coded fees or priorities.
A new bitcoind that hasn't seen enough transactions to estimate
will fall back to the old hard-coded minimum priority or
transaction fee.
-paytxfee option overrides -txconfirmtarget.
Relaying and mining code isn't changed.
For Qt, the coin control dialog now uses priority estimates to
label transaction priority (instead of hard-coded constants);
unspent outputs were consistently labeled with a much higher
priority than is justified by the free transactions actually
being accepted into blocks.
I did not implement any GUI for setting -txconfirmtarget; I would
suggest getting rid of the "Pay transaction fee" GUI and replace
it with either "target number of confirmations" or maybe
a "faster confirmation <--> lower fee" slider or select box.
This changes the keystore data format, wallet format and IsMine logic
to detect watch-only outputs based on direct script matching rather
than first trying to convert outputs to destinations (addresses).
The reason is that we don't know how the software that has the spending
keys works. It may support the same types of scripts as us, but that is
not guaranteed. Furthermore, it removes the ambiguity between addresses
used as identifiers for output scripts or identifiers for public keys.
One practical implication is that adding a normal pay-to-pubkey-hash
address via importaddress will not cause payments to the corresponding
full public key to be detected as IsMine. If that is wanted, add those
scripts directly (importaddress now also accepts any hex-encoded script).
Conflicts:
src/wallet.cpp
Changes:
* Add Add/Have WatchOnly methods to CKeyStore, and implementations
in CBasicKeyStore.
* Add similar methods to CWallet, and support entries for it in
CWalletDB.
* Make IsMine in script/wallet return a new enum 'isminetype',
rather than a boolean. This allows distinguishing between
spendable and unspendable coins.
* Add a field fSpendable to COutput (GetAvailableCoins' return type).
* Mark watchonly coins in listunspent as 'watchonly': true.
* Add 'watchonly' to validateaddress, suppressing script/pubkey/...
in this case.
Based on a patch by Eric Lombrozo.
Conflicts:
src/qt/walletmodel.cpp
src/rpcserver.cpp
src/wallet.cpp
Note: This is added to our existing automake targets rather than as a
libtool-style lib. The switch to libtool-style targets can come later if it
proves to not add any complications.
5d59921 add missing BOOST_FOREACH indentation in ThreadSocketHandler() (Philip Kaufmann)
9e9ca2b small cleanup of #ifdefs in BindListenPort() (Philip Kaufmann)
After pull #4288, RPC messages indicating errors have a Content-Length unrelated
to their actual contents, rendering bitcoin-cli and curl unable to decode the
reply.
This patch sets the Content-Length field based on the actual content returned.
Additionally, pull #4288 clobbered the error descriptions provided in
ErrorReply, which bitcoin-cli relies upon; this patch moves #4288 http-error
descriptions to an HTTPError method, allowing HTTPReply to pass content on
unchanged.
The original comment forgets to account for the script push which will
need an OP_PUSHDATA2 + 2-bytes for the 513 script bytes.
props davecgh
fixes#4224
-respendnotify=<cmd> Execute command when a network tx respends wallet
tx input (%s=respend TxID, %t=wallet TxID)
Add respendsobserved array to gettransaction, listtransactions, and
listsinceblock RPCs. This omits the malleated clones that are included
in the walletconflicts array.
Add RPC help for respendsobserved and walletconflicts (help was missing
for the latter).
Respend transactions that conflict with transactions already in the
wallet are added to it. They are not displayed unless they also involve
the wallet, or get into a block. If they do not involve the wallet,
they continue not to affect balance.
Transactions that involve the wallet, and have conflicting non-equivalent
transactions, are highlighted in red. When the conflict first occurs, a
modal dialog is thrown.
CWallet::SyncMetaData is changed to sync only to equivalent transactions.
When a conflict is added to the wallet, counter nConflictsReceived is
incremented. This acts like a change in active block height for the
purpose of triggering UI updates.
Allows network wallets and other clients to see transactions that respend
a prevout already spent in an unconfirmed transaction in this node's mempool.
Knowledge of an attempted double-spend is of interest to recipients of the
first spend. In some cases, it will allow these recipients to withhold
goods or services upon being alerted of a double-spend that deprives them
of payment.
As before, respends are not added to the mempool.
Anti-Denial-of-Service-Attack provisions:
- Use a bloom filter to relay only one respend per mempool prevout
- Rate-limit respend relays to a default of 100 thousand bytes/minute
- Define tx2.IsEquivalentTo(tx1): equality when scriptSigs are not considered
- Do not relay these equivalent transactions
Remove an unused variable declaration in txmempool.cpp.
ed5769f Move AcceptedConnection class to rpcserver.h. (Jeff Garzik)
854d013 RPC code movement: separate out JSON-RPC execution logic from HTTP server logic (Jeff Garzik)
c912e22 RPC cleanup: Improve HTTP server replies (Jeff Garzik)
1) support varying content types
2) support only sending the header
3) properly deliver error message as content, if HTTP error
4) move AcceptedConnection class to header, for wider use
By default, all command line parameters are converted into JSON string
values. There is no need to manually specify the incoming type.
A binary decision "parse as string or JSON?" is all that's necessary.
Convert to a simple class, initialized at runtime startup, which offers
a quick lookup to answer "parse as JSON?" conversion question.
Future parameter conversions need only to indicate the method name
and zero-based index of the parameter needing JSON parsing.
In the LookupIntern(), things changed are:
1. Call getaddrinfo_a() instead of getaddrinfo() if available, the former is a sync version of the latter;
2. Try using inet_pton()/inet_addr() to convert the input text to a network addr structure at first, if success the extra name resolving thread inside getaddrinfo_a() could be avoided;
3. An interruption point added in the waiting loop for return from getaddrinfo_a(), which completes the improve for thread responsiveness.
A easy way to see the effect is to kick off a 'bitcoind stop' immediately after 'bitcoind -daemon', before the change it would take several, or even tens of, minutes on a bad network situation to wait for the running bitcoind to exit, now it costs only seconds.
Signed-off-by: Huang Le <4tarhl@gmail.com>
8ae973c Allocate more space if necessary in RandSeedAddPerfMon (Wladimir J. van der Laan)
be873f6 Issue warning if collecting RandSeed data failed (Wladimir J. van der Laan)
fcb0a1b change "char pch[200000]" to "new char[200000]" (daniel)
Currently we use a fixed buffer of 250000 bytes to request
HKEY_PERFORMANCE_DATA. In many cases this is not enough, causing the
entropy collection to be skipped.
Use a loop that grows the buffer as specified in the RegQueryValueEx
documentation:
http://msdn.microsoft.com/en-us/library/windows/desktop/ms724911%28v=vs.85%29.aspx
(as the size of the performance data can differ for every call, the
normal solution of requesting the size then allocating that can't work)
- SO_NOSIGPIPE isn't available on WIN32 so merge the 2 non-WIN32 blocks
- use predefined names from header for IPV6_PROTECTION_LEVEL and
PROTECTION_LEVEL_UNRESTRICTED
Two changes:
First removes a unit test that fails in my development environment
(OSX, compiled -g3 with clang).
sipa says that's not terribly surprising; the CMutableTransaction change
makes signing a little more expensive but verification quicker. The unit
test timed sign+verify-uncached versus verify-cached-five-times.
He also says the test will be invalid when libsec256kp1 is integrated
(because validation is super-optimized over signing).
core.h change fixes a compiler warning (clang -Wall : CMutableTransaction defined
as struct, declared as class in script.h).
- New status bar control shows the current Unit of Display.
When clicked (left,or right button) it shows a context menu
that allows the user to switch the current Unit of Display (BTC, mBTC, uBTC)
- Recent Requests and Transaction Table headers are now updated when
unit of display is changed, because their "Amount" column now displays the
current unit of display.
- Takes care of issue #3970 Units in transaction export csv file.
- Small refactors for reusability.
- Demo Video https://www.youtube.com/watch?v=wwcr0Yh68go&list=UUG3jF2hgofmLWP0tRPisQAQ
- changes after Diapolo's feedback. Have not been able to build after last pool, issues with boost on MacOSX, will test on Ubuntu these changes.
- removed return statement on switch
- renamed onDisplayUnitsChanged(int) to updateDisplayUnit(int)
- now getAmountColumnTitle(int unit) takes a simple unit parameter. moved to BitcoinUnits.
This commit removes all the unnecessary dependencies (key, core,
netbase, sync, ...) from bitcoin-cli.
To do this it shards the chain parameters into BaseParams, which
contains just the RPC port and data directory (as used by utils and
bitcoin-cli) and Params, with the rest.
Relax the AreInputsStandard() tests for P2SH transactions --
allow any Script in a P2SH transaction to be relayed/mined,
as long as it has 15 or fewer signature operations.
Rationale: https://gist.github.com/gavinandresen/88be40c141bc67acb247
I don't have an easy way to test this, but the code changes are
straightforward and I've updated the AreInputsStandard unit tests.
bitcoin-config.h moved, but the old file is likely to still exist when
reconfiguring or switching branches. This would've caused files to not rebuild
correctly, and other strange problems.
Make the path explicit so that the old one cannot be found.
Core libs use config/bitcoin-config.h.
Libs (like crypto) which don't want access to bitcoin's headers continue
to use -Iconfig and #include bitcoin-config.h.
`&vch[vch.size()]` and even `&vch[0]` on vectors can cause assertion
errors with VC in debug mode. This is the problem mentioned in #4239.
The deeper problem with this is that we rely on undefined behavior.
- Add `begin_ptr` and `end_ptr` functions that get the beginning and end
pointer of vector in a reliable way that copes with empty vectors and
doesn't reference outside the vector
(see https://stackoverflow.com/questions/1339470/how-to-get-the-address-of-the-stdvector-buffer-start-most-elegantly/1339767#1339767).
- Add a convenience constructor to CFlatData that wraps a vector.
I added `begin_ptr` and `end_ptr` as separate functions as I imagine
they will be useful in more places.
a0495bb Add <Hasher>::OUTPUT_SIZE (Pieter Wuille)
4791b99 crypto: create a separate lib for crypto functions (Cory Fields)
f2647cc crypto: explicitly check for byte read/write functions (Cory Fields)
5437248 build: move bitcoin-config.h to its own directory (Cory Fields)
3820e01 Extend and move all crypto tests to crypto_tests.cpp (Pieter Wuille)
7ecd973 Move {Read,Write}{LE,BE}{32,64} to common.h and use builtins if possible (Pieter Wuille)
a5bc9c0 Add built-in RIPEMD-160 implementation (Pieter Wuille)
13b5dfe Move crypto implementations to src/crypto/ (Pieter Wuille)
1cc344c Add built-in SHA-1 implementation. (Pieter Wuille)
85aab2a Switch miner.cpp to use sha2 instead of OpenSSL. (Pieter Wuille)
cf0c47b Remove getwork() RPC call (Pieter Wuille)
7b4737c Switch script.cpp and hash.cpp to use sha2.cpp instead of OpenSSL. (Pieter Wuille)
977cdad Add a built-in SHA256/SHA512 implementation. (Pieter Wuille)
Cancelling the RPC acceptors can sometimes result in an error about
a bad file descriptor.
As this is the shutdown sequence we need to continue nevertheless,
ignore these errors, log a warning and proceed.
Fixes#4352.
As it says on the tin. It was deprecated in version 0.9, and
at some point it should be removed.
Removes the dependency of bitcoind on libbitcoin-cli.a. Move
some functions that used to be shared but are now only used in
bitcoin-cli.cpp to that file.
After this change, an error is printed (and exit code 1 is returned)
when the user tries to send RPC commands using bitcoind.
