* Remove CActiveLegacyMasternodeManager
* Remove sentinelping RPC
* Remove unused P2P messages and inv types
There are still places where these are used in the code. The next commits
will clean these up.
* Remove MNB/MNP/MNVERIFY related code from masternode(man).h/cpp
* Remove all legacy code regarding block MN payee voting
* Remove MASTERNODE_SYNC_LIST and MASTERNODE_SYNC_MNW states
Also replace all uses of IsMasternodeListSynced and IsWinnersListSynced
with IsBlockchainSynced.
* Remove unsupported masternode RPCs
* Remove UpdateLastPaid methods
* Remove duplicate deterministicmns.h include
* Remove masternode.conf support
* Remove legacy MN lists support from masternode list GUI
* Remove unnecessary AskForMN call
* Remove compatibility code in CPrivateSendQueue::GetSignatureHash
* Don't add locally calculated MN payee in case GetBlockTxOuts failed
This is not valid in DIP3 mode
* Remove check for IsDeterministicMNsSporkActive in "masternode status"
* Move CMasternode::IsValidNetAddr to CActiveDeterministicMasternodeManager
* Remove use of CMasternode::CheckCollateral in governance code
* Remove uses of MASTERNODE_SENTINEL_PING_MAX_SECONDS/MASTERNODE_SENTINEL_PING_MAX_SECONDS
* Remove support for "-masternodeprivkey"
* Remove pre-DIP3 vote cleanup
* Remove compatibility code for quorumModifierHash/masternodeProTxHash
* Remove check for invalid nBlockHeight in CMasternodePayments::GetBlockTxOuts
...and let it crash instead. We expect this method to be called with the
correct height now (after DIP3 was fully deployed).
* Remove ECDSA based Sign/CheckSignature from CGovernanceObject
Only masternodes sign governance objects, so there is no need for ECDSA
support here anymore.
* Always add superblock and MN reward payments into new block
* Always check block payees (except if fLiteMode==true)
* Always allow superblock and MN payees in same block
* Remove/Fix a few references to masternode.conf and related stuff
Also delete guide-startmany.md and masternode_conf.md
* Implement NotifyMasternodeListChanged signal and call governance maintenance
* Remove non-DIP3 code path from CMasternodeMan::Find
* Remove remaining unused code from CMasternode/CMasternodeMan
* Always load governance.dat on startup
* Mine an empty block instead of incrementing nHeight from chain tip in miner tests
This test is crashing otherwise in GetBlockTxOuts as it tries to access a
previous block that is not existing.
* Skip MN payments verification on historical blocks (pre-DIP3 blocks)
Even though DIP3 was active on BIP9 level, the spork was not active yet at
that point meaning that payments were not enforced at that time.
* Remove unused state and CollateralStatus enums
* Unconditionally return false from IsBlockPayeeValid when IsTransactionValid returns false
IsTransactionValid already handles the case where IsDIP3Active() returns
false, making it return true.
* Add override keyword to CDSNotificationInterface::NotifyMasternodeListChanged
* Fix help for masternodelist status (POSE_BANNED and no OUTPOINT_SPENT)
1. Make strMode lower case before comparing it (keyIDXXX would otherwise
be case sensitive, leading to confusion for users)
2. Remove "rank" and "keyid" mode from help
3. Add keyIDOwner/keyIDVoting/pubKeyOperator to help and strMode check
4. Remove "pubkey" from strMode check
5. Call ToString() on address instead of whole DMN state
6. Add missing std::setw(10) to "full" mode
Additionally, implement GetLastDsq in CMasternodeMan as a replacement
for direct access to the masternode_info_t object. Will move this variable
to another (PS specific) place later.
* Replace IsDeterministicMNsSporkActive with IsDIP3Active
IsDIP3Active will now use a fixed parameter from consensus params.
Values for DIP0003Height/DIP0003Hash need to be updated when spork15
activates on mainnet.
Also enforce correct block hash on testnet/mainnet for DIP3 activation
block.
* Remove SPORK_15_DETERMINISTIC_MNS_ENABLED
* Replace all uses of IsDeterministicMNsSporkActive with IsDIP3Active
* Remove DIP3 upgrade-path tests and directly start with DIP3 enabled tests
* Make -masternodeprivkey non-mandatory
This code will vanish later.
* Use CountMasternodes() in ClientModel::getMasternodeCountString
* Use CountMasternodes() for total count in masternode_count
* Fix CountMasternodes() to give correct number of masternodes with spork15 enabled
Also change CountEnabled to not call CountMasternodes anymore but instead
have its own implementation which uses GetValidMNsCount instead of GetAllMNsCount
* Apply review suggestions
* Pass CCoinsView reference to special TX handling methods
* Allow referencing other TX outputs for ProRegTx collateral
* Remove "collateralAmount" from "protx register"
* Rename "protx register" to "protx fund_register"
* Remove UpdateSpork15Value from CDeterministicMNManager
Was not used/implemented anymore
* Lock masternode collaterals after chain/DIP3 is fully initialized
Otherwise detection of collaterals does not work.
* Implement new "protx register" RPC which uses existing collaterals
* Remove "masternode info" RPC
It is not consistent with other "masternode" RPCs anymore as it requires
the ProRegTx hash while all other RPCs work with the collateral.
* Load sporks from disk cache before initializing the chain
Otherwise spork15 is not loaded when we check it for the first time.
* Implement "protx info" RPC
* Use "protx info" instead of "masternode info" in DIP3 tests
* Test external collaterals for ProTx
* Handle review comments
* Don't pass CCoinView reference when it's not used
* Revert "Pass CCoinsView reference to special TX handling methods"
This reverts commit 28688724e112c8fe18e44aef055768dbbc068d7d.
* Use GetUTXOCoin instead of now removed coinsView
Also remove collateral height check as GetUTXOCoin only returns confirmed
coins.
* Add conflict handling for external collaterals to mempool
* Handle review comments (squashed Github suggestions)
Co-Authored-By: codablock <ablock84@gmail.com>
* Use BLS keys for operator keys
* Add "bls generate" RPC to generate BLS keys
* Use unique_ptr to store blsKeyOperator and blsPubKeyOperator
Needed because the Chia BLS library crashes when keys are created before
the library is initialized, even if keys are not used. This is the case here
as we have static instances here.
* Remove unnecessary CheckSignature calls
This seems to be some garbage I left in by mistake.
* Fixed review comments
* Fix rpc help for operator keys
All keys that are used as examples are random. None of the secret keys
belongs to any of the public keys.
* Use .GetHash() instead of ::SerializeHash() for BLS pubkeys in txmempool.cpp
* Rename mapProTxBlsPubKeys to mapProTxBlsPubKeyHashes
* Cleaned up brackets on if, while, for, BOOST_FOREACH. Some whitespace fixes
* gov, mn and mining cleanup
* Revert "Cleaned up brackets on if, while, for, BOOST_FOREACH. Some whitespace fixes"
This reverts commit 4a2a1b0645c5195025d0c7e6dad2e01a93efbfd6.
* Revert "gov, mn and mining cleanup"
This reverts commit 7cb91aabc67df0ab60db4ee84e3aaaf6cf6b7881.
* cleanup some dash specific
* "if(" -> "if (" "for(" -> "for (" + corrected some else blocks
* Split PS into Manager and Session
* Adjust log messages accordingly
* add -privatesendsessions cmd-line option
* address review comments
* bump MAX_OUTBOUND_MASTERNODE_CONNECTIONS to 30
+10 for parallel mixing
* protect vecSessions
* constructors
* Rewrite CMasternodeMan::ProcessMasternodeConnections() to use CPrivateSendClientManager::GetMixingMasternodesInfo().
This should solve potential deadlock cs_vecqueue vs cs_vNodes.
* Drop no longer used IsMixingMasternode()
* lock cs_wallet when mixing uses balance related functions
* Split keyIDMasternode into keyIDOwner/keyIDOperator/keyIDVoting
keyIDOwner is the key used for things which should stay in control of the
collateral owner, like proposal voting.
keyIDOperator is the key used for operational things, like signing network
messages, signing trigger/watchdog objects and trigger votes.
keyIDVoting is the key used for proposal voting
Legacy masternodes will always have the same key for all 3 to keep
compatibility.
Using different keys is only allowed after spork15 activation.
* Forbid reusing collateral keys for operator/owner keys and vice versa
* Bump SERIALIZATION_VERSION_STRING in CMasternodeMan
* Support help for masternode rpc call subcommands
* Support help for gobject rpc call subcommands
* squash ifs for conditions to show help
* remove code duplication for masternode list and masternodelist help calls
* Split CActiveMasternode into CActiveMasternodeInfo and CLegacyActiveMasternodeManager
* Use CKeyID instead of CPubKey whenever possible in masternode code
* Rename activeMasternode to activeMasternodeInfo and make it a struct
* Rename pubKeyIDXXX to keyIDXXX
* Bump SERIALIZATION_VERSION_STRING
* Fix build error after rebase
* Fix compilation warning/error with clang
* Allow changing budget parameters for regtest
* Lift some limitations for local addresses for masternodes in regtest
Needed to make masternodes works in regtest mode
* Add "masternode check" RPC to force invocation of CheckAndRemove
Useful in integration tests where MN lists must be predictable
* move nStart closer to used and initialize it
* Quells warning displayed with `-Wmaybe-uninitialized` flag
* remove unused mnEntries vectors
* add devnet magic bytes to mininode.py
* remove unused governance-misc.h file
* remove old TODO comments
* replace map count/insert w/emplace in instantx.cpp
This feels like an optimization, something about:
```
if map.count(key)
return false
else
insert(pair)
return true
```
... just feels icky. Plus, `vote.GetMasternodeOutpoint()` is only called
once. The previous version might be slightly more readable, however.
* Revert "replace map count/insert w/emplace in instantx.cpp"
This reverts commit d7f876e86336170f2d6d3f20b6af26bcd0dc2b18.
* Drop CInstantSend::IsEnoughOrphanVotesForTxAndOutPoint
* small cleanup in rpc tests
* move some pieces from .h to .cpp
* fix few log outputs
* fix some comments
* some trivial fixes + readability
* RPC: fix listunspent include_unsafe param usage
* RPC: Add two fields to indicate if some mempool entry is an InstantSend tx and if it was locked or not
* RPC: Add privatesend_balance to getwalletinfo rpc
* RPC: "BTC" -> CURRENCY_UNIT
* RPC: more EnsureWalletIsAvailable in Dash-specific code
* RPC: EnsureWalletIsUnlocked in `gobject prepare`
Also fixes missing cs_wallet lock
* RPC: disable `privatesend` rpc on masternodes completely
* RPC: refactor `spork` rpc
* RPC: Show correct port in HelpExampleRpc
* RPC: few trivial fixes
* fix
* Call CheckMnbAndUpdateMasternodeList when when starting MN
Otherwise the invoking node won't have nCollateralMinConfBlockHash
updated correctly, resulting in the MN showing up in the wrong position
when masternode ranks are calculated.
* Remove UpdateMasternodeList and remaining uses of it
* Drop BOOST_FOREACH in Dash-specific code (only), no changes in behavior
* Use references in loops (use const references where applicable) in Dash-specific code (only)
And adjust related code to make it compilable.
* Loop through nodes via connman.ForEachNode in dsq Relay instead of creating a copy
4e7e2e1 Update RPC argument names (John Newbery)
481f289 rpc: Named argument support for bitcoin-cli (Wladimir J. van der Laan)
9adb4e1 rpc: Argument name consistency (Wladimir J. van der Laan)
8d713f7 rpc: Named arguments for rawtransaction calls (Wladimir J. van der Laan)
37a166f rpc: Named arguments for wallet calls (Wladimir J. van der Laan)
78b684f rpc: Named arguments for mining calls (Wladimir J. van der Laan)
b8ebc59 rpc: Named arguments for net calls (Wladimir J. van der Laan)
2ca9dcd test: Add test for RPC named arguments (Wladimir J. van der Laan)
fba1a61 rpc: Named arguments for misc calls (Wladimir J. van der Laan)
286ec08 rpc: Add 'echo' call for testing (Wladimir J. van der Laan)
495eb44 rpc: Named arguments for blockchain calls (Wladimir J. van der Laan)
6f1c76a rpc: Support named arguments (Wladimir J. van der Laan)
5865d41 authproxy: Add support for RPC named arguments (Wladimir J. van der Laan)
ConnectNode is meant to be private and should not be leaked outside of
CConnman. This leaking resulted in multiple problems with AddRef/Release
behaviour. We use OpenNetworkConnectio/OpenMasternodeConnection from now on
and use appropriate ForNode calls to access the CNode* instance.
This commit also changes the behaviour for already connected nodes which
are afterwards requested for a masternode connection. We don't set
fMasternode=true anymore on such nodes, which means it won't be auto
disconnected anymore from ProcessMasternodeConnections.
e7156ad [RPC] pass HTTP basic authentication username to the JSONRequest object (Jonas Schnelli)
69d1c25 [RPC] Give RPC commands more information about the RPC request (Jonas Schnelli)
23c32a9 rpc: Change JSONRPCRequest to JSONRPCRequestObj (Wladimir J. van der Laan)
