* Introduce "qsendrecsigs" to indicate that plain recovered sigs should be sent
Full nodes, including masternodes, will send this message automatically.
Other node implementations (e.g. SPV) are usually not interested and would
not send this message.
* Use std::atomic<bool> instead of std::atomic_bool
Not related to this PR, but a small enough change to include it here as
well.
* Add support for log category to CBatchedLogger
* Use "llmq" logging category in LLMQ code
* Use "chainlocks" logging category in ChainLocks code
* Log errors without logging category
* Don't rely on UTXO set in CheckCanLock
The UTXO set only works for TXs in the mempool and won't work when we try
to retroactively lock unlocked TXs from blocks.
This is safe as ProcessTx is only called when a TX was accepted into the
mempool or connected in a block, which means that all input checks were
good.
* Rename RetryLockMempoolTxs to RetryLockTxs and let it retry connected TXs
* Instead of manually calling ProcessTx, let SyncTransaction handle all cases
SyncTransaction is called from AcceptToMemoryPool and when transactions got
connected in a block. So this is the time we want to run TXs through
ProcessTx. This also enables retroactive signing of TXs that were unknown
before a new block appeared.
* Test retroactive signing and safe TXs in LLMQ ChainLocks tests
* Also test for retroactive signing of chained TXs
* Honor lockedParentTx when looking for TXs to retry signing
* Stop scanning for TXs to retry after a depth of 6
* Generate 6 block to avoid retroactive signing overloading Travis
* Avoid retroactive signing
* Don't rely on NewPoWValidBlock and use SyncTransaction to build blockTxs
NewPoWValidBlock is not guaranteed to be called when blocks come in fast.
When a block is accepted in AcceptBlock, NewPoWValidBlock is only called
when the new block is a successor of the currently active tip. This is not
the case when after the first block a second block is accepted immediately
as the first block is not connected yet.
This might be a bug actually in the handling of NewPoWValidBlock, so we
might need to check/fix this later, but currently I prefer to not touch
that part.
Instead, we now use SyncTransaction to gather TXs for blockTxs. This works
because SyncTransaction is called for all transactions in a freshly
connected block in one go. The call also happens before UpdatedBlockTip is
called, so it's fine with the existing logic.
* Use tx.IsCoinBase() instead of checking index 0
Also check for empty vin.
* Remove unused parameters from CInstantSendManager::ProcessTx
* Pass txHash in CheckCanLock by reference instead of pointer
* Dont' allow locking of TXs without inputs
* Remove unused local variable nInstantSendConfirmationsRequired
* Don't subtract 1 from nInstantSendConfirmationsRequired
This was necessary in the old system but is not necessary in the new system.
It also prevented proper retroactive signing of chained TXs in regtest as
it resulted in child TXs to return true immediately for CheckCanLock when
it should actually have waited for the parent TX to become locked first.
* Access chainActive.Height() while cs_main is locked
* Properly read and write lastChainLockBlock
"pindex" is NOT the chainlocked block after the while loop finishes. We
must use the pindex (renamed to pindexChainLock now) given on method entry.
Also, the GetLastChainLockBlock() result was not assigned to,
lastChainLockBlock which resulted in the while loop to run unnecessarily
long.
* Generalize filtering in NewPoWValidBlock and SyncTransaction
We're actually interested in all TXs that have inputs, so no need to
explicitly check for tx types.
* Use tx.IsCoinBase() instead of checking for index 0
* Handle cases where a TX is not received yet in wait_for_instantlock
* Wait on all nodes for the locks
Otherwise we end up with the sender having it locked but other nodes
not yet, failing the test.
* Fix LogPrintf call in CChainLocksHandler::DoInvalidateBlock
* Require only 3 out of 5 signatures for old InstantSend in regtest mode
* Use LLMQs of size 5 with threshold of 3 for regtest
* Fix wrong check for out-of-range bits in CFixedBitSet
* Reduce number of masternodes in masternode/LLMQ tests
* Add missing \n to LogPrintf call
* Use correct indexes for isolated/receiver/sender nodes
The way it was before resulted in nodes 1-3 being unused and 6-8 being used
for these 3 special nodes even though these are masternodes.
* Avoid stopping/starting isolated node in p2p-instantsend.py
It's enough to disable networking for this node.
* Print which DKG type aborted
* Don't directly call EnforceBestChainLock and instead schedule the call
Calling EnforceBestChainLock might result in switching chains, which in
turn might end up calling signals, so we get into a recursive call chain.
Better to call EnforceBestChainLock from the scheduler.
* Regularly call EnforceBestChainLock and reset error flags on locked chain
* Don't invalidate blocks from CChainLocksHandler::TrySignChainTip
As the name of this method implies, it's trying to sign something and not
enforce/invalidate chains. Invalidating blocks is the job of
EnforceBestChainLock.
* Only call ActivateBestChain when tip != best CL tip
* Fix unprotected access of bestChainLockBlockIndex and bail out if its null
* Fix ChainLocks tests after changes in enforcement handling
* Only invoke NotifyChainLock signal from EnforceBestChainLock
This ensures that NotifyChainLock is not prematurely called before the
block is fully connected.
* Use a mutex to ensure that only one thread executes ActivateBestChain
It might happen that 2 threads enter ActivateBestChain at the same time
start processing block by block, while randomly switching between threads
so that sometimes one thread processed the block and then another one
processes it. A mutex protects ActivateBestChain now against this race.
* Rename local copy of bestChainLockBlockIndex to currentBestChainLockBlockIndex
* Don't call ActivateBestChain when best CL is part of the main chain
This requires the removal of some very liberal (incorrect) cs_mains
sprinkled in some tests. It adds some chainActive.Tip() races, but
the tests are all single-threaded anyway.
725b79a [test] Verify node doesn't send headers that haven't been fully validated (Russell Yanofsky)
3788a84 Do not send (potentially) invalid headers in response to getheaders (Matt Corallo)
Pull request description:
Nowhere else in the protocol do we send headers which are for
blocks we have not fully validated except in response to getheaders
messages with a null locator. On my public node I have not seen any
such request (whether for an invalid block or not) in at least two
years of debug.log output, indicating that this should have minimal
impact.
Tree-SHA512: c1f6e0cdcdfb78ea577d555f9b3ceb1b4b60eff4f6cf313bfd8b576c9562d797bea73abc23f7011f249ae36dd539c715f3d20487ac03ace60e84e1b77c0c1e1a
eff4bd8 [test] P2P functional test for certain fingerprinting protections (Jim Posen)
a2be3b6 [net] Ignore getheaders requests for very old side blocks (Jim Posen)
Pull request description:
Sending a getheaders message with an empty locator and a stop hash is a request for a single header by hash. The node will respond with headers for blocks not in the main chain as well as those in the main chain. To avoid fingerprinting, the node should, however, ignore requests for headers on side branches that are too old. This replicates the logic that currently exists for `getdata` requests for blocks.
Tree-SHA512: e04ef61e2b73945be6ec5977b3c5680b6dc3667246f8bfb67afae1ecaba900c0b49b18bbbb74869f7a37ef70b6ed99e78ebe0ea0a1569369fad9e447d720ffc4
b49ad44 Add comment about cs_most_recent_block coverage (Matt Corallo)
c47f5b7 Cache witness-enabled state with recent-compact-block-cache (Matt Corallo)
efc135f Use cached [compact] blocks to respond to getdata messages (Matt Corallo)
Tree-SHA512: ffc478bddbf14b8ed304a3041f47746520ce545bdeffa9652eff2ccb25c8b0d5194abe72568c10f9c1b246ee361176ba217767af834752a2ca7263d292005e87
This seems to be backported wrongly. In the Bitcoin code, there is a
condition on requested witness data and we took the other branch which
recreates the compact block. We should have taken the other branch because
we always send with witness data (there is no Segwit in Dash).
It's actually not true that these should always be the same. In case a
quorum is built and the total number of masternodes in the network is below
the quorum size, we might still end up having a valid quorum as long as
the total number of masternodes is >= minSize.
* Fix remaining `print`s in tests
* use AssertLockHeld(cs) instead of relying on comments
* actually use `clsig` in `EnforceBestChainLock()`
* fix log output in `EnforceBestChainLock()`
* drop comments
* Fix deadlock in CSigSharesManager::SendMessages
Locking "cs" at this location caused a (potential) deadlock due to changed
order of cs and cs_vNodes locking. This changes the method to not require
the session object anymore which removes the need for locking.
* Pass size of LLMQ instead of llmqType into CSigSharesInv::Init
This allows use of sizes which are not supported in chainparams.
Later commits will introduce checks for "safe TXs" which might abort the
signing on first try, but succeed a few seconds later, so we periodically
retry to sign the tip.
* Let Commit() return void
The boolean return value will loose its meaning in the next commit
* Implement 2-stage commits for CDBTransaction and CScopedDBTransaction
CDBTransaction is changed to allow CDBBatch, CDBWrapper and other
CDBTransactions as parent instead of just CDBWrapper. This in turn allows
to implement multi-staged commits in CEvoDB.
We now have the "current transaction" which is started and ended (commit
or rollback) for each call to Connect-/DisconnectBlock. When the current
transaction is committed, it moves its contents into the "root transaction"
instead of directly writing to CDBWrapper.
CommitRootTransaction() then handles the final commitment to CDBWrapper. It
is called at the same time when the chainstate is flushed to disk, which
guarantees consistency between chainstate and CEvoDB.
* Allow to efficiently move values into parent transactions to avoid copies
When CDBTransaction<CDBTransaction<...>>::Commit() is called, we can avoid
copying values from this transaction to the parent transaction and instead
pass values by rvalue and let the contents be moved.
* Revert "Force FlushStateToDisk on ConnectTip/DisconnectTip while not in IBD (#2560)"
This reverts commit 6dfceaba5a.
It was reported on iOS that CMerkleBlock sometimes included the dummy
quorum commitments introduced with v13, which led to banning of nodes as
these were not supported/expected there.
We should in general only include TXs here that are of interest for SPV
nodes, so we should maintain the list of allowed TX types.
* Fix incorrect usage of begin() when genesis block is requested in "protx diff"
.begin() on mapBlockIndex does NOT return the genesis block, but just the
block with lowest hash.
The fix is to use chainActive[0] to get the genesis block.
* Update src/evo/simplifiedmns.cpp
Co-Authored-By: codablock <ablock84@gmail.com>
* Do not process blocks in CDeterministicMNManager before dip3 activation
This should save us some cpu/disk on initial sync/reindex
* Write initial snapshot on dip3 activation
* Let Commit() return void
The boolean return value will loose its meaning in the next commit
* Implement 2-stage commits for CDBTransaction and CScopedDBTransaction
CDBTransaction is changed to allow CDBBatch, CDBWrapper and other
CDBTransactions as parent instead of just CDBWrapper. This in turn allows
to implement multi-staged commits in CEvoDB.
We now have the "current transaction" which is started and ended (commit
or rollback) for each call to Connect-/DisconnectBlock. When the current
transaction is committed, it moves its contents into the "root transaction"
instead of directly writing to CDBWrapper.
CommitRootTransaction() then handles the final commitment to CDBWrapper. It
is called at the same time when the chainstate is flushed to disk, which
guarantees consistency between chainstate and CEvoDB.
* Allow to efficiently move values into parent transactions to avoid copies
When CDBTransaction<CDBTransaction<...>>::Commit() is called, we can avoid
copying values from this transaction to the parent transaction and instead
pass values by rvalue and let the contents be moved.
* Revert "Force FlushStateToDisk on ConnectTip/DisconnectTip while not in IBD (#2560)"
This reverts commit 6dfceaba5a.
* Add a button/context menu item to show qr codes for addresses in address book
* Add a context menu item to show qr code for addresses in transaction list
The local node might be the bad one actually as it might not have catched
up with the chain. In that case, LLMQs might be different for the sending
and receiving node.
When ProcessMessageBatchedSigShares returns false, it's interpreted as
if an invalid/malicious message was received, causing a ban. So, we should
return "!ban" instead of just "ban".
It was reported on iOS that CMerkleBlock sometimes included the dummy
quorum commitments introduced with v13, which led to banning of nodes as
these were not supported/expected there.
We should in general only include TXs here that are of interest for SPV
nodes, so we should maintain the list of allowed TX types.
* Ignore sig share inv messages when we don't have the quorum vvec
* Update src/llmq/quorums_signing_shares.cpp
Co-Authored-By: codablock <ablock84@gmail.com>
* On timeout, print members proTxHashes from members which did not send a share
* Move inactive quorums check above timeout checks
This allows to reuse things in the next commit
* Avoid locking cs_main through GetQuorum by using a pre-filled map
* Use find() instead of [] to access quorums map
* Return bool in ProcessMessageXXX methods to indicate misbehaviour
* Send/Receive multiple messages as part of one P2P message in CSigSharesManager
Many messages, especially QSIGSHARESINV and QGETSIGSHARES, are very small
by nature (5-14 bytes for a 50 members LLMQ). The message headers are
24 bytes, meaning that we produce a lot of overhead for these small messages.
This sums up quite a bit when thousands of signing sessions are happening
in parallel.
This commit changes all related P2P messages to send a vector of messages
instead of a single message.
* Remove bogus lines
Included these by accident
* Unify handling of BanNode in ProcessMessageXXX methods
* Remove bogus check for fMasternodeMode
* Properly use == instead of misleading >= in SendMessages
* Put "didSend = true" near PushMessage
Stop relying on the information previously found in the CSigSharesInv
and CBatchedSigShares messages and instead use the information found in
the session refereced by the session id.
This also updates a few LogPrintf calls. Previously, CSigSharesInv::ToString
also included the signHash in the returned string, which is not the case
anymore, so we have to add it manually.
We must watch out to not blindly use externally provided keys in unordered
sets/maps, as attackers might find ways to cause unbalanced hash buckets
causing performance degradation.
Allows convenient salted hashing with unordered maps and sets. Useful when
there is a risk of unbalanced hash buckets slowing things down, e.g. when
externally supplied hashes are used as keys into a map.
* Indicate success when signing was unnecessary
* Fix typo in name of LLMQ_400_60
* Move RemoveAskFor call for CLSIGs into ProcessNewChainLock
In case we got INV items for the same CLSIG that we recreated through
HandleNewRecoveredSig, (re-)requesting of the CLSIG from other peers
becomes unnecessary.
* Move Cleanup() call in CChainLocksHandler::UpdatedBlockTip up
We bail out early in a few situations from this method, so that Cleanup()
might not be called while its at the bottom.
* Bail out from CChainLocksHandler::UpdatedBlockTip if we already got the CLSIG
* Call RemoveAskFor when QFCOMMITMENT was received
Otherwise we might end up re-requesting it for a very long time when the
commitment INV was received shortly before it got mined.
* Call RemoveSigSharesForSession when a recovered sig is received
Otherwise we end up with session data in node states lingering around until
a fake "timeout" occurs (can be seen in the logs).
* Better handling of false-positive conflicts in CSigningManager
The old code was emitting a lot of messages in logs as it treated sigs
for exactly the same session as a conflict. This commit fixes this by
looking at the signHash before logging.
Also handle a corner-case where a recovered sig might be deleted between
the HasRecoveredSigForId and GetRecoveredSigById call.
* Don't run into session timeout when sig shares come in slow
Instead of just tracking when the first share was received, we now also
track when the last (non-duplicate) share was received. Sessios will now
timeout 5 minutes after the first share arrives, or 1 minute after the last
one arrived.
45a5aaf Only call clear on prevector if it isn't trivially destructible and don't loop in clear (Jeremy Rubin)
aaa02e7 Add prevector destructor benchmark (Jeremy Rubin)
Tree-SHA512: 52bc8163b65b71310252f2d578349d0ddc364a6c23795c5e06e101f5449f04c96cbdca41c0cffb1974b984b8e33006471137d92b8dd4a81a98e922610a94132a
4d51e9b Assert ConnectBlock block and pIndex are the same block (NicolasDorier)
972714c pow: GetNextWorkRequired never called with NULL pindexLast (Daniel Cousens)
cc44c8f ContextualCheckBlockHeader should never have pindexPrev to NULL (NicolasDorier)
Tree-SHA512: 7cc568bf9417267c335f21ec3d1505b26e56e5b3d5f4d3dbb555279489800aaa65a3bcd7bc376e274dd102912aec16ddbb18de2e2060b2667b41eb979cd9321e
dcf2112 Add safe flag to listunspent result (NicolasDorier)
af61d9f Add COutput::fSafe member for safe handling of unconfirmed outputs (Russell Yanofsky)
Tree-SHA512: 311edb6fa8075b3ede5b24cb8c6e5d133ccd8ac9ecafea07b604ffa812ee4f071337e31695e662d8573590a0460af20aaaeb39d49c9ea87924449ea50bdfb0b3
* Add libbacktrace to depends
This is currently only useful to extract symbols. It fails to gather
stacktraces when compiled with MinGW, so we can only use it to get symbol
information from a stack trace which we gathered outside of libbacktrace.
* Add -mbig-obj to CXXFLAGS for MinGW builds
* Implement stacktraces for C++ exceptions
This is a hack and should only be used for debugging. It works by wrapping
the C++ ABI __wrap___cxa_allocate_exception. The wrapper records a backtrace
and stores it in a global map. Later the stacktrace can be retrieved with
GetExceptionStacktraceStr.
This commit also adds handlers to pretty print uncaught exceptions and
signals.
* Use GetPrettyExceptionStr for all unhandled exceptions
* Use --enable-stacktraces in CI for linux32/linux64
* Register exception translators to pretty print exceptions in unit tests
* Catch and print python exceptions when stopping nodes
Otherwise the code at the bottom is never executed when nodes crash,
leading to no output of debug.log files on Travis.
* Remove now unneeded/unused TestCrash methods
Instead of trying to manually figure out params for different quorum/ring sizes, connect to nodes at indexes (i+2^k)%n where k: 0..floor(log2(n-1))-1, n: size of the quorum/ring
* Implement and use SigShareMap instead of ordered map with helper methods
The old implementation was relying on the maps being ordered, which allowed
us to grab all sig shares for the same signHash by doing range queries on
the map. This has the disadvantage of being unnecessarily slow when the
maps get larger. Using an unordered map would be the naive solution, but
then it's not possible to query by range anymore.
The solution now is to have a specialized map "SigShareMap" which is
indexed by "SigShareKey". It's internally just an unordered map, indexed by
the sign hash and another unordered map for the value, indexed by the
quorum member index.
* Only use unordered maps/sets in CSigSharesManager
These are faster when maps/sets get larger.
* Use unorderes sets/maps in CSigningManager
* Don't sleep in WorkThreadMain when CPU intensive work was done
When the current iteration resulted in CPU intensive work, it's likely that
the next iteration will result in work as well. Do not sleep in that case,
as we're otherwise wasting (unused) CPU resources.
* No matter how fast we process sig shares, always force 100ms between sending
* Apply review suggestions
This removes the burden on the message handler thread when many sig batches
arrive. The expensive part of deserialization is now performed in the sig
shares worker thread.
This also removes the need for the specialized deserialization of the sig
shares which tried to avoid the malleability check, as CBLSLazySignature does
not perform malleability checks at all.
In some cases it takes too much time to perform full deserialization of
BLS signatures in the message handler thread. Better to just read the
buffer and do the actual deserialization when the signature is needed for
the first time (which is can be in another thread).
This adds the reading side of a pipe to the read-set when calling select().
Writing to the writing side of the pipe then causes select() to wake up
immediately. Otherwise it would wait for the timeout of 50ms, even if there
is data that could possibly be sent.
This is useful when many messages need are pushed with optimistic send being
disabled. After all messages have been pushed, WakeSelect() can then wakeup
the select() thread and force a re-check for pending data to send.
This is currently only implemented for POSIX compliant systems as we assume
that heavy-load daemons (like masternodes) are usually run on Linux.
Profiling has shown that optimistic send causes measurable slowdowns when
many messages are pushed, even if the sockets are non-blocking. Better to
allow disabling of optimistic sending in such cases and let the network
thread do the actual socket calls.
* Fix incorrect usage of begin() when genesis block is requested in "protx diff"
.begin() on mapBlockIndex does NOT return the genesis block, but just the
block with lowest hash.
The fix is to use chainActive[0] to get the genesis block.
* Update src/evo/simplifiedmns.cpp
Co-Authored-By: codablock <ablock84@gmail.com>
* Do not process blocks in CDeterministicMNManager before dip3 activation
This should save us some cpu/disk on initial sync/reindex
* Write initial snapshot on dip3 activation
* Drop registry deletion of the old key
* Drop no longer used CGovernanceObjectVoteFile::RemoveOldVotes()
* Drop temporary disconnect code and bump min protos to 70213
* drop comment
* fix
* Do not access wallet directly from masternodelist ui, use wallet model instead
* Don't access deterministicMNManager from UI directly, use client model instead
* Send just a general signal to UI elements when mn list has changed and let them handle it in their specific ways
* Drop mn list update timers and use signals instead
* some cleanup
* Move initial UI update to init.cpp
* Refactor getMasternodeList()
* Rename setMasternodeCount to updateMasternodeCount
* Drop legacy code in comments
* Drop NotifyMasternodeListChanged from uiInterface and use NotifyBlockTip instead
6c1fb73 Improve logging in bctest.py if there is a formatting mismatch (John Newbery)
Tree-SHA512: ef33f4766df92a987cd714d73b98277616ff947ad0e43811013dda668e31464062816480bd654865231d56d37fb4d6e4ccdccbcb2f0e2f01f49572b843a232ae
* Adjust help text of `register*` rpc commands
Copy/paste help for various fields of `register`/`register_prepare` instead of referring to `register_fund`
Adjust description of provided functionality and expected results
* Adjust whitespaces to match in different protx commands
* Add missing results descriptions
* Introduce new helper function GetHelpString to concentrate most of param descriptions in rpcevo in one place
* [MOVEONLY] Move GetHelpString out of #ifdef ENABLE_WALLET/#endif
* static const
* Implement secure verification in bls_batchverifier
* Rename CBLSInsecureBatchVerifier to CBLSBatchVerifier
* Add unit tests for simple BLS verifcation and CBLSBatchVerifier
No need to send gobject inv for a single gobject, the other node already knows it, so send votes only.
Also, no need to send "fake" stats like "0 votes" when syncing gobjects and "1 object" when syncing votes.
Rename functions accordingly.
* Store quorumHash of first mined commitment in evoDb
This allows to skip scanning for quorums below this block.
* Speed up CQuorumManager::ScanQuorums
This does 2 things:
1. Only call HasQuorum for blocks that are potentially a quorumBlockHash
These are only blocks which are at index 0 of each DKG interval
2. Stop scanning for quorums when we get below the first block that
contained a commitment. If no commitment was ever mined, we bail out
immediately.
* Return result instead of {}
* Remove HasQuorum() call as GetQuorum already does this
* Remove unnecessary "if (!qc.IsNull()))"
It's already checked at the top of the loop
* When necessary, remove DB_FIRST_MINED_COMMITMENT from evoDb in UndoBlock
db07f91 Assert that what might look like a possible division by zero is actually unreachable (practicalswift)
Tree-SHA512: f1652eb37196a5b72f356503a1fbb44fb98aa8a94954ad1765f86d81ebf41a2337d4eb58c4f19937fda3752f5d2d642756e44afdbd438015b87ac20801246bff
* Check aggPubKey for IsValid() instead of aggSig
aggSig is not reliable here as it might already be initialized by the
previous message.
* Significantly reduce sleep time for each DKG phase
Turns out the DKG is much faster then expected, and waiting multiple
minutes for each phase in a devnet is not much fun.
* Correctly use SIGN_HEIGHT_OFFSET when checking for out of bound height
* Introduce startBlockHeight to make things more explicit
* Allow sub-batch verification in CBLSInsecureBatchVerifier
* Implement batch verification of CDKGDebugStatus messages
* Use uint8_t for statusBitset in CDKGDebugMemberStatus and CDKGDebugSessionStatus
No need to waste one byte per member and per LLMQ type.
* Reserve 4k of buffer for CSerializedNetMsg buffer
Profiling has shown that a lot of time is spent in resizing the data
vector when large messages are involved.
* Remove nHeight from CDKGDebugStatus
This field changes every block and causes all masternodes to propagate
its status for every block, even if nothing DKG related has changed.
* Leave out session statuses when we're not a member of that session
Otherwise MNs which are not members of DKG sessions will spam the network
* Remove receivedFinalCommitment from CDKGDebugSessionStatus
This is not bound to a session and thus is prone to spam the network when
final commitments are propagated in the finalization phase.
* Add "minableCommitments" to "quorum dkgstatus"
* Hold cs_main while calling GetMinableCommitment
* Abort processing of pending debug messages when spork18 gets disabled
* Don't ask for debug messages when we've already seen them
"statuses" only contains the current messages but none of the old messages,
so nodes kept re-requesting old messages.
ad1ae7a Check and enable -Wshadow by default. (Pavel Janík)
9de90bb Do not shadow variables (gcc set) (Pavel Janík)
Tree-SHA512: 9517feb423dc8ddd63896016b25324673bfbe0bffa97f22996f59d7a3fcbdc2ebf2e43ac02bc067546f54e293e9b2f2514be145f867321e9031f895c063d9fb8
* Move llmqChainLocks initialization closer to other LLMQ related assignments
* Use smaller LLMQs for ChainLocks on testnet and devnet
We very often don't have enough MNs on testnet so we should use a smaller
quorum quorum for ChainLocks.
* Use fast_dip3_enforcement instead of fast_dip3_activation
DashTestFramework was refactored before ChainLocks got merged, causing tests
to fail now.
* Move updating of DKG debug status into WaitForNextPhase
Otherwise callers of the RPCs might believe that the next phase has already
started and start producing more blocks, which would then cancel the
current session if it happens faster than the phase handler thread can
progress to the next phase.
* Adjust help text of `register*` rpc commands
Copy/paste help for various fields of `register`/`register_prepare` instead of referring to `register_fund`
Adjust description of provided functionality and expected results
* Adjust whitespaces to match in different protx commands
* Add missing results descriptions
* Introduce new helper function GetHelpString to concentrate most of param descriptions in rpcevo in one place
* [MOVEONLY] Move GetHelpString out of #ifdef ENABLE_WALLET/#endif
* static const
d678771 Wallet: Sanitise -wallet parameter (Luke Dashjr)
9756be3 Wallet/RPC: Use filename rather than CWallet pointer, for lockwallet RPCRunLater job name (Luke Dashjr)
86be48a More tightly couple EnsureWalletIsAvailable with GetWalletForJSONRPCRequest where appropriate (Luke Dashjr)
a435632 Move wallet RPC declarations to rpcwallet.h (Luke Dashjr)
ad15734 RPC: Pass on JSONRPCRequest metadata (URI/user/etc) for "help" method (Luke Dashjr)
bf8a04a Reformat touched lines with C++11 (Luke Dashjr)
2e518e3 Move nWalletUnlockTime to CWallet::nRelockTime, and name timed task unique per CWallet (Luke Dashjr)
d77ad6d RPC: Do all wallet access through new GetWalletForJSONRPCRequest (Luke Dashjr)
eca550f RPC/Wallet: Pass CWallet as pointer to helper functions (Luke Dashjr)
Tree-SHA512: bfd592da841693390e16f83b451503eb5cedb71208089aa32b3fc45e973555584a3ed7696dd239f6409324464d565dacf0f3d0e36e8e13ae6a7843848465f960
* Implement copy_datadir to allow easy copying of state from one node to another
* Instead of starting with a fresh datadir for MNs, reuse a copy of the faucet
* Start masternodes in parallel instead of waiting for the previous to finish
* Allow specifying of window and threshold with -bip9params
* Implement -dip3activationheight for regtests
* Implement fast DIP3 activation in DashTestFramework
* Speed up activation of DIP3 in dip3-deterministicmns.py
* Update qa/rpc-tests/test_framework/test_framework.py
Co-Authored-By: codablock <ablock84@gmail.com>
* Always assign fast_dip3_activation
* Fix off-by-1 in phase calculations
* Fix wait_for_quorum_phase, should look for check_received_messages
* Fix wait_for_quorum_phase for complain phase
* Bump default timeout in wait_for_quorum_phase/wait_for_quorum_commitment to 15
* Fix cleanup of old recovered sigs
When iterating the db, we should also include entries that match exactly
the end time.
* Fix key not found error
* Raise AssertionError in case wait_for_quorum_phase/wait_for_quorum_commitment time out
6485466 test: Report InitBlockIndex result (Wladimir J. van der Laan)
Tree-SHA512: 8e1408aa8d56ec1873190f886af24aa68b0555ec4996b2b8a5a39a51ded58c8fba5843c07881ed33ab6dcb00e62c2322bcf2a6fb8f1083f77e0d93e7295ab938
7ed143c Add test for CWalletTx::GetImmatureCredit() returning stale values. (Russell Yanofsky)
Tree-SHA512: c95088ed6dfc5a0774ddaa2fe14ac0a9ebd830922a4d77100ec3d51fdeb6df40ad97de4f2ea970ed0f4122dcc0022ee1d43ab3c7188becd7f90c1c6af0ed39b7
7e6dcd9 random: Add fallback if getrandom syscall not available (Wladimir J. van der Laan)
7cad849 sanity: Move OS random to sanity check function (Wladimir J. van der Laan)
aa09ccb squashme: comment that NUM_OS_RANDOM_BYTES should not be changed lightly (Wladimir J. van der Laan)
224e6eb util: Specific GetOSRandom for Linux/FreeBSD/OpenBSD (Wladimir J. van der Laan)
Tree-SHA512: 9fd408b1316c69de86674f342339b2f89192fd317c8c036b5df4320f828fa263c7966146bfc1904c51137ee4a26e4cb0f560b2cd05e18cde4d808b9b92ad15c4
