The call to CheckBlock() in ConnectBlock() is redundant with calls to it
prior to storing a block on disk. If CheckBlock() fails with an error
indicating the block is potentially corrupted, then shut down
immediately, as this is an indication that the node is experiencing
hardware issues. (If we didn't shut down, we could go into an infinite
loop trying to reconnect this same bad block, as we're not setting the
block's status to FAILED in the case where there is potential
corruption.)
If CheckBlock() fails for some other reason, we'll end up flagging this
block as bad (perhaps some prior software version "let a bad block in",
as the comment indicates), and not trying to connect it again, so this
case should be properly handled.
90ba2df11 Fix missing cs_main lock for GuessVerificationProgress() (Jonas Schnelli)
Pull request description:
`GuessVerificationProgress()` needs `cs_main` due to accessing the `pindex->nChainTx`.
This adds a `AssertLockHeld` in `GuessVerificationProgress()` and adds the missing locks in...
* `LoadChainTip()`
* `ScanForWalletTransactions()` (got missed in #11281)
* GUI, `ClientModel::getVerificationProgress()` <--- **this may have GUI performance impacts**, but could be relaxed later with a cache or something more efficient.
Tree-SHA512: 13302946571422375f32af8e396b9d2c1180f2693ea363aeba9e98c8266ddec64fe7862bfdcbb5a93a4b12165a61eec1e51e4e7d7a8515fa50879095dc163412
face7220b7 qa: Move common args to bitcoin.conf (MarcoFalke)
Pull request description:
Beside removing duplicates of the same args in the code, this actually helps with debugging after a test failure.
For example, `bitcoin-qt` has `server` turned off, so you'd have to turn it on every time, if you wanted to debug a temporary test datadir created by the test framework.
Also, `keypool` would fill up if you forget to specify `-keypool=1`.
Tree-SHA512: 996bec8738dc0fce7297ab1fc5b4fbe3aa31b9b6241f8c4e685db728925363ccaca6145ad1edc6bee2f360e02ac4b9a53fcdff74eb79de90793393742d52b559
ac91ea6 [depends] Allow depends system to support armv7l (Henrik Jonsson)
Pull request description:
Credit for the actual patches goes to @theuni, I just tested them on an armv7l machine.
This change allows the depends system to build our dependencies on 32-bit ARM / armv7l architecture. I.e. with this patch, the following steps now builds fine:
```
$ uname -m
armv7l
$ ./autogen.sh
$ cd depends && make NO_QT=1 && cd ..
$ ./configure --prefix=$(pwd)/depends/armv7l-unknown-linux-gnueabihf
$ make
```
Without this patch, the `cd depends && make NO_QT=1` command fails on armv7l.
Tree-SHA512: 1a81be2f1346e0e7080e83a991d9851f0371438262a34580eda5f43ebd220a3ce1ed0d783c43a0a8aed18082bbb1afc91e5c9bf3f4a36eecc82b6a9b6eff5e4c
42e1b5d [test] Round target fee to 8 decimals in assert_fee_amount (Karl-Johan Alm)
Pull request description:
The output would produce arbitrary number of decimal points, sometimes resulting in 9 decimals:
```
AssertionError: Fee of 0.00000415 BTC too low! (Should be 0.000006175 BTC)
```
The above looks like the expected fee is 6175 sats when in reality it's 618.
Tree-SHA512: ddbff2926a88890d6e34a58db36f0b15a917a80064be6e40e9bcbec3f05ae6202d02adcd7873733945b043fa121d4a56dd930446ec368078fe1935cbfff898ce
835a21b Squashed 'src/leveldb/' changes from c521b3ac65..64052c76c5 (MarcoFalke)
Pull request description:
Pull in changes from https://github.com/bitcoin/bitcoin/pull/11674#issuecomment-348174674.
Merges cleanly into master and 0.16 branch.
Tree-SHA512: 819c042c0dfac8dc3078fc182c1e22d4a85b343967475d3389be5b5b056361114d8c9892437cd1dc4b45808c27880c0e166e047afc2c2bd2bbc33e55336a8c33
d2ee6e3 init: Remove translation for `-blockmaxsize` option help (Wladimir J. van der Laan)
Pull request description:
Move `-blockmaxsize`, a deprecated option which is replaced by `-blockmaxweight`, to debug options and remove the translation.
This message is absolutely terrible for translators (esp the `* 4` part).
(for 0.17 we should probably remove this option completely?)
(reported by French Language Coordinator)
Tree-SHA512: 379150c9217672d2f2f93b4c02a3ac638e77ca56fb518e30c56c46d59f89eac422b4f540e70a9abd3c6ad653ac4b786d4734621b18f93804885d81e223f1a908
eacc5b24f8 Declare CMutableTransaction a struct in rawtransaction.h (Ben Woosley)
Pull request description:
Because it's a struct.
Fix for #10579 - this was called out in code review. https://github.com/bitcoin/bitcoin/pull/10579#discussion_r168936821
Tree-SHA512: 10758a667218481de6f50b5ed874e92eb350c621f7a6355fba7da6ab42b09e1764f827e89491c8663e554fcfd23f124b299f968237c6ad1ff7819e211bd7e521
a6e6e39a8b Bugfix: respect user defined configuration file (-conf) when open conf. file from QT settings (Jonas Schnelli)
Pull request description:
Fixes#12488.
In master, opening the configuration file from the GUI settings will always open the file "bitcoin.conf" regardless of the `-conf=` settings.
This PR makes the GUI settings open configuration file function respect the `-conf` option.
Tree-SHA512: fb54cc699b4d2a3947f749fdf5f1a51251ffd67d0f6c6a937a5b80f0ba5a5c1085d0eef190453bbc04696d4d76c2c266de0fe9712e65e4bb36116158b54263d4
Move `-blockmaxsize`, a deprecated option which is replaced by
`-blockmaxweight`, to debug options and remove the translation.
This message is absolutely terrible for translators (esp the `* 4`
part).
The output would produce arbitrary number of decimal points, sometimes resulting in 9 decimals:
AssertionError: Fee of 0.00000415 BTC too low! (Should be 0.000006175 BTC)
The above looks like the expected fee is 6175 sats when in reality it's 618.
d60234885b Add test for signrawtransaction (Andrew Chow)
eefff65a4b scripted-diff: change signrawtransaction to signrawtransactionwithwallet in tests (Andrew Chow)
1e79c055cd Split signrawtransaction into wallet and non-wallet (Andrew Chow)
Pull request description:
This PR is part of #10570. It also builds on top of #10571.
This PR splits `signrawtransaction` into two commands, `signrawtransactionwithkey` and `signrawtransactionwithwallet`. `signrawtransactionwithkey` requires private keys to be passed in and does not use the wallet for any signing. `signrawtransactionwithwallet` uses the wallet to sign a raw transaction and does not have any parameters to take private keys.
The `signrawtransaction` RPC has been marked as deprecated and will call the appropriate RPC command based upon the parameters given. A test was added to check this behavior is still consistent with the original behavior.
All tests that used `signrawtransaction` have been updated to use one of the two new RPCs. Most uses were changed to `signrawtransactionwithwallet`. These were changed via a scripted diff.
Tree-SHA512: d0adf5b4cd7077639c504ec07bee262a3b94658d34db0a5c86a263b6393f7aa62f45129eafe29a7c861aa58440dd19348ee0c8b685e8a62d6f4adae8ec8f8cb3
526e28220a contrib: Add support for out-of-tree builds in gen-manpages.sh (Wladimir J. van der Laan)
Pull request description:
This adds support for setting the environment variable `BUILDDIR` to point to executables that are outside the source directory.
E.g. to invoke the tool when the build is in $PWD/build:
```bash
BUILDDIR=$PWD/build contrib/devtools/gen-manpages.sh
```
This avoids having to manually copy the generated manpages after they end up in the build instead of source path, when setting TOPDIR instead.
Tree-SHA512: 8dc6dd7a47a0c014ae7d27f0ac9d86f69238ec6bac8a3007b975bb88c9f37014755c716c5e62604dd91baad2f8a41fd1544cdca3ba4b59bc76602e6593f4a4a7
Splits signrwatransaction into a wallet version (signrawtransactionwithwallet) and
non-wallet version (signrawtransactionwithkey). signrawtransaction is marked as DEPRECATED
and will call the right signrawtransaction* command as per the parameters in order to
maintain compatibility.
Updated signrawtransactions test to use new RPCs
b22cce014 scripted-diff: validateaddress to getaddressinfo in tests (Andrew Chow)
b98bfc5ed Create getaddressinfo RPC and deprecate parts of validateaddress (Andrew Chow)
1598f3230 [rpc] Move DescribeAddressVisitor to rpc/util (John Newbery)
39633ecd5 [rpc] split wallet and non-wallet parts of DescribeAddressVisitor (John Newbery)
Pull request description:
This PR makes a new RPC command called `getaddressinfo` which relies on the wallet. It contains all of `validateaddress`'s address info stuff. Those parts in `validateaddress` have been marked as deprecated. The tests have been updated to use `getaddressinfo` except the `disablewallet` test which is the only test that actually uses `validateaddress` to validate an address.
Tree-SHA512: ce00ed0f2416200b8de1e0a75e8517c024be0b6153457d302c3879b3491cce28191e7c29aed08ec7d2eeeadc62918f5c43a7cb79cd2e4b6d9291bd83ec31c852
8b661f971fixes#12465 added missing terminating newline character in log message (Josh Hartshorn)
Pull request description:
Adding missing new line as detailed in #12465
Tree-SHA512: 48f1e3f892f7c13b862d24b4e807cc42310001cab65d771ddf758155f727554bf13c59fa9a6c9fb93d1d0466f03f142289b5fcad9d7938fd55b1a268fc1307ed
a777244e4 Build: Add a makefile target for Doxygen documentation (Andrea Comand)
Pull request description:
You can now build the doxygen documentation with `make docs` and clean it with `make clean-docs`.
Fixes: #11949
Tree-SHA512: f2361ec7f771227367dd04bba1a444b44e59f13901463a678a5f2f579a10a56d67db2e29552e754e312a1c472a31593b6af189cbaac5cd351a428c57baf5ace7
e710387ca9 test: Fix bip68 sequence test to reflect updated rpc error message (Ben Woosley)
Pull request description:
The message changed in #12356, but this test is in the extended test suite, so it didn't fail on CI.
Tree-SHA512: ce800e2636ab7bbba7876aa533e1684e75c37a7d2a119f9c4602fd89ac9215e2e28710a1f27feb642b6737ed858da049ebc52fdd476ff4637e3ac3bb1d8399ce
df47afb600 Revert "[tests] bind functional test nodes to 127.0.0.1" (John Newbery)
Pull request description:
#12200 was merged without test, and breaks `rpc_bind.py`. (Tested locally by @MarcoFalke and me).
This PR backs out the change.
Fixes#12462
Tree-SHA512: e92901a0ce05af86486d4f74457953a5502689b03bb2ad9a94f6fd1664385fdda8aa351e601e27ee6580227ea9adb4d7d7fbdc381e69af6b998d9c6f6d358751
Change all instances of validateaddress to getaddressinfo since it seems that
no test actually uses validateaddress for actually validating addresses.
-BEGIN VERIFY SCRIPT-
find ./test/functional -path '*py' -not -path ./test/functional/wallet_disable.py -not -path ./test/functional/rpc_deprecated.py -not -path ./test/functional/wallet_address_types.py -exec sed -i'' -e 's/validateaddress/getaddressinfo/g' {} \;
-END VERIFY SCRIPT-
Moves the parts of validateaddress which require the wallet into getaddressinfo
which is part of the wallet RPCs. Mark those parts of validateaddress which
require the wallet as deprecated.
Validateaddress will call getaddressinfo
for the data that both share for right now.
Moves IsMine functions to libbitcoin_common and then links libbitcoin_wallet
before libbitcoin_common in order to prevent linker errors since IsMine is no
longer used in libbitcoin_server.
dd7e42cbb4 test: Add missing signal.h header (Wladimir J. van der Laan)
Pull request description:
util_tests.cpp needs to include the signal.h header on FreeBSD.
Reported by denis2342 on IRC.
Tree-SHA512: 0b946fc2770ca6043087f4fe22be96848d46efe44e3d4d45c5ee663e0f95b0e2e6145f4ade577a6257d0c0c4cfadf324111799e78b9e4e4be4da8a90f68e349f
be45a67 Add some script tests related to BOOL ops and odd values like negative 0. (Richard Kiss)
Pull request description:
Add some script tests related to BOOL ops and odd values like negative 0.
Tree-SHA512: 8e633f7ea5eea39e31016994baf60f295fa1dc8cae27aa5fcfc741ea97136bfb3ddc57bb62b9c6bf9fe256fc09cdd184906ba8e611e297cf8d2d363da2bbf1d4
d7f438a gitian: bump descriptors for (0.)17 (Cory Fields)
Pull request description:
Bumping before we forget again. If we end up calling the next release 17.0, we'll have to fixup the descriptors anyway, so there's no harm in just doing the trivial bump now.
Tree-SHA512: f3401ec9f813132765280c60d47ae5d1697af5e6966a3798cb907dad10b7d76398032bf2a642a5a4de1055facec07a76a3055e0e9050cdab1d50caf32940e738
fafbf7f74e devtools: Exclude patches from lint-whitespace (MarcoFalke)
Pull request description:
By default, unified patches have trailing whitespace in all context lines. Thus, exclude patches from linting.
Tree-SHA512: 8f89f1584581e94dd4e34bd522cba21602bafe7933b4631a3abc5da5a8f25568810862d696618fe63c15edf3e046869ad5077d09373f09792985503c6a415538
