617c459c6 qa: rpc test for wtxid in mempool entry (Suhas Daftuar)
7e5d5965d RPC: add wtxid to mempool entry output (Suhas Daftuar)
Pull request description:
We already cache this information in the mempool, so including it in the output of rpc calls is basically free.
Tree-SHA512: 2757e1bfca028103937e4b76ce1a5d805846bad5d3d9dd631dcc5f87721bcc0e9d19e437e02053ef1dd3b38b503f0fca8c0b8492cac37dfbd70256a3665f704c
faa8d9581 [qa] TestNode: Add wait_until_stopped helper method (MarcoFalke)
Pull request description:
This adds a helper method `wait_until_stopped` to the `TestNode` class. This should prevent numerous `time.sleep()` over all places.
Additionally, the timeout behavior is restored. (Was removed by the introduction of `TestNode`.)
This should prevent tests from running indefinitely by accident.
Tree-SHA512: 7133fc64d55711869c4e372e9d30625c98f1237fb3578c24a26900d9319831f10eb95592d7b08e536fa706158dffb0abf9197f11c5d9ef605c880628e1a6533f
eac64bb7a [qa] Test nMinimumChainWork (Suhas Daftuar)
0311836f6 Allow setting nMinimumChainWork on command line (Suhas Daftuar)
Pull request description:
As discussed briefly here: https://botbot.me/freenode/bitcoin-core-dev/2017-02-28/?msg=81712308&page=4
This adds a hidden command line option for setting `nMinimumChainWork`, which allows us to test this parameter in our functional tests, as well as allowing for niche use cases like syncing nodes that are otherwise disconnected from the network.
See also #10345, which proposes a new use of `nMinimumChainWork`.
Tree-SHA512: fe4d8f4f289697615c98d8760f1cc74c076110310ea0b5b875fcab78c127da9195b4eb84148aebacc7606c246e5773d3f13bd5d9559d0a8bffac20a3a28c62df
Nodes don't consider themselves out of "initial block download" until
their active chain has more work than nMinimumChainWork.
While in initial block download, nodes won't relay blocks to their
peers, so test that this parameter functions as intended by verifying
that block relay only succeeds past a given node once its
nMinimumChainWork has been exceeded.
7148b74dc [tests] Functional tests must explicitly set num_nodes (John Newbery)
5448a1471 [tests] don't override __init__() in individual tests (John Newbery)
6cf094a02 [tests] Avoid passing around member variables in test_framework (John Newbery)
36b626867 [tests] TestNode: separate add_node from start_node (John Newbery)
be2a2ab6a [tests] fix - use rpc_timeout as rpc timeout (John Newbery)
Pull request description:
Some additional tidyups after the introduction of TestNode:
- commit 1 makes TestNode use the correct rpc timeout. This should have been included in #11077
- commit 2 separates `add_node()` from `start_node()` as originally discussed here: https://github.com/bitcoin/bitcoin/pull/10556#discussion_r121161453 with @kallewoof . The test writer no longer needs to assign to `self.nodes` when starting/stopping nodes.
- commit 3 adds a `set_test_params()` method, so individual tests don't need to override `__init__()` and call `super().__init__()`
Tree-SHA512: 0adb030623b96675b5c29e2890ce99ccd837ed05f721d0c91b35378c5ac01b6658174aac12f1f77402e1d38b61f39b3c43b4df85c96952565dde1cda05b0db84
Almost all test scripts currently need to override the __init__()
method. When they do that they need to call into super().__init__() as
the base class does some generic initialization.
This commit makes the base class __init__() call into set_test_params()
method. Individual test cases can override set_test_params() to setup
their test parameters.
Separates the act of creating a TestNode object from starting the node.
The test_framework now keeps track of its list of TestNodes, and test
writers can call start_node() and stop_node() without having to update
the self.nodes list.
4f2905b76 Add getmininginfo functional test (Cristian Mircea Messel)
Pull request description:
Add `getmininginfo` functional test in `mining.py`
Tree-SHA512: 12be9cfb37e9ac4c6625fc06051704c8a8dfd7271c2654f994c7659c8810e4b7a4335105ae159315308bcd45b65589bab1829bd134d2f4cabf74d63f2e5d22fe
6d2d2eb49 RPC: gettxout: Slightly improve doc and tests (Jorge Timón)
Pull request description:
Slightly related to https://github.com/bitcoin/bitcoin/pull/10822 in the sense that I felt the documentation and testing wasn't as good as it could be while writing it.
Ping @sipa since we discussed this on IRC.
Tree-SHA512: a0b3ffdac65245a0429e772fc2d8bcc1e829b02c70fb2af6ee0b7578cae46683f6c51a824b4d703d4dc3f99b6f03a658d6bbc818bf32981516f24124249a211d
c6ec4358a [tests] Add bitcoin_cli.py test script (John Newbery)
b23549f6e [tests] add TestNodeCLI class for calling bitcoin-cli for a node (John Newbery)
Pull request description:
We don't test bitcoin-cli at all. That means that we can miss inconsistencies between the bitcoin-cli client and the RPC interface, such as #10698 and #10747. It also means that the various bitcoin-cli options and features are untested and regressions could be silently introduced.
Let's fix that.
This PR adds bitcoin-cli testing in the python functional test_framework:
1. Add a bitcoin_cli.py test script that tests bitcoin-cli. At the moment it only tests that the result of `getinfo` is the same if you run it as an RPC or through bitcoin-cli, but can easily be extended to test additional bitcoin-cli features
**EDIT: `--usecli` option is moved to a separate PR. This PR now only covers the bitcoin_cli.py test.**
2. ~Add a `--usecli` option to the test framework. This changes the test to use bitcoin-cli for all RPC calls instead of using direct HTTP requests. This is somewhat experimental. It works for most tests, but there are some cases where it can't work transparently because:~
- ~the testcase is asserting on a specific error code, and bitcoin-cli returns a different error code from the direct RPC~
- ~we're sending a very large RPC request (eg `submitblock`) and it can't be serialized into a shell bitcoin-cli call.~
~I think that even though `--usecli` doesn't work on all tests, it's still a useful experimental feature. Future potential enhancements:~
- ~enhance the framework to automatically skip tests that are known to fail with bitcoin-cli if the `--usecli` option is used.~
- ~run a subset of tests in Travis with `-usecli`~
This builds on and requires the `TestNode` PR #10711 . As an aside, this is a good demonstration of how tidy it is to add additional features/interfaces now that test node logic/state is encapsulated in a TestNode class.
Addresses #10791
Tree-SHA512: a1e6be12e8e007f6f67b3d3bbcd142d835787300831eb38e6027a1ad25ca9d79c4bc99a41b19e31ee95205cba1b3b2d21a688b5909316aad70bfc2b4eb6d8a52
08ce33f8e qa: Move wait_until to util (MarcoFalke)
Pull request description:
This moves `wait_until` to `util.py` to make it generally available to python tests.
Also, `wait_until` now takes an optional lock that is acquired while testing the predicate.
Previously the lock was always acquired, even when it was not necessary, cf. `disconnect_ban.py`.
Tree-SHA512: 18e452a017a6566fa8ad09bde058e1b841e167039dc63299e70cfa7a6dcbc779581e60ca3e8eb2f1b610767d5208b9376c203eb11015b250fd0542b5eb4215a8
Fixes a couple of bugs from the introduction of TestNode:
- test scripts were no longer able to specify a custom timeout for
starting a node. Therefore tests with nodes that take a long time to
start up (eg pruning.py) would fail.
- the test for whether a node has failed on start up was broken
by changing 'assert x is None' to 'assert not x'. Since
subprocess.poll() can return None (indicating the node is still running)
or 0 (indicating the node exited with return code 0), this was a
regression.
When running the tests locally with a parallelism of 4 on an otherwise
busy system, RPC can take quite a wait to come up.
Change the timeout to 60 seconds just to be safe.
e53615b Remove vchDefaultKey and have better first run detection (Andrew Chow)
Pull request description:
Removes vchDefaultKey which was only used for first run detection. Improves wallet first run detection by checking to see if any keys were read from the database.
This also fixes a (rather contrived) case where an encrypted non-HD wallet has corruption such that the default key is no longer valid and is loaded into a Core version that supports HD wallets. This causes a runtime exception since a new hd master key is generated as the software believes the wallet file is newly created but cannot add the generated key to the wallet since it is encrypted. I was only able to replicate this error by creating a non-hd wallet, encrypting it, then editing the wallet using `db_dump` and `db_load` before loading the wallet with hd enabled. This problem has been reported by [two](https://bitcointalk.org/index.php?topic=1993244.0) [users](https://bitcointalk.org/index.php?topic=1746976.msg17511261#msg17511261) so it is something that can happen, although that raises the question of "what corrupted the default key".
~P.S. I don't know what's up with the whitespace changes. I think my text editor is doing something stupid but I don't think those are important enough to attempt undoing them.~ Undid those
Tree-SHA512: 63b485f356566e8ffa033ad9b7101f7f6b56372b29ec2a43b947b0eeb1ada4c2cfe24740515d013aedd5f51aa1890dfbe499d2c5c062fc1b5d272324728a7d55
1d8df0141 Fix MD formatting in REST-interface.md and spelling mistake in test_runner.py (MeshCollider)
41f3e84aa Fix inconsistencies and grammar in various files (MeshCollider)
Pull request description:
Just a simple fix of some inconsistent capitalization, formatting and grammar in a few files (no code changes)
Tree-SHA512: 60b12a5a5c69a1af4a25b7db0b32ed806ed62ad2966cee08b3792a7cfa7f51848fd485349b4c09e60a7eedfdf55ee730c51daa066d6e226ae404c93342bf3e13
f42fc1d50 doc: spelling fixes (klemens)
Pull request description:
patch contains some spelling fixes ( just in comments ) as found by a bot ( http://www.misfix.org, https://github.com/ka7/misspell_fixer ).
Tree-SHA512: ba6046cfcd81b0783420daae7d776be92dd7b85a593e212f8f1b4403aca9b1b6af12cef7080d4ea5ed4a14952fd25e4300109a59c414e08f5395cdb9947bb750
Removes vchDefaultKey which was only used for first run detection.
Improves wallet first run detection by checking to see if any keys
were read from the database.
This will now also check for a valid defaultkey for backwards
compatibility reasons and to check for any corruption.
Keys will stil be generated on the first one, but there won't be
any shown in the address book as was previously done.
TestNode is a class responsible for all state related to a bitcoind node
under test. It stores local state, is responsible for tracking the
bitcoind process and delegates unrecognised messages to the RPC
connection.
This commit changes start_nodes and stop_nodes to start and stop the
bitcoind nodes in parallel, making test setup and teardown much faster.
d34957e [wallet] [tests] Add keypool topup functional test (Jonas Schnelli)
095142d [wallet] keypool mark-used and topup (John Newbery)
c25d90f [wallet] Add HasUnusedKeys() helper (John Newbery)
f2123e3 [wallet] Cache keyid -> keypool id mappings (John Newbery)
83f1ec3 [wallet] Don't hold cs_LastBlockFile while calling setBestChain (John Newbery)
2376bfc [wallet] [moveonly] Move LoadKeyPool to cpp (Matt Corallo)
cab8557 [wallet] [moveonly] Move CAffectedKeysVisitor (Jonas Schnelli)
Pull request description:
This PR contains the first part of #10882 :
- if a key from the keypool is used, mark all keys up to that key as used, and then try to top up the keypool
- top up the keypool on startup
Notably, it does not stop the node or prevent the best block from advancing if the keypool drops below a threshold (which means that transactions may be missed and funds lost if restoring from an old HD wallet backup).
Tree-SHA512: ac681fefeaf7ec2aab2fa1da93d12273ea80bd05eb48d7b3b551ea6e5d975dd97ba7de52b7fba52993823280ac4079cc36cf78a27dac708107ebf8fb6326142b
cc5d38f4b Add option to attach a python debugger if test fails (John Newbery)
Pull request description:
Adds a simple option to the test_framework to attach pdb if the test fails.
Helpful for catching and debugging intermittent failures: Run the test in a loop with this option. The first failure will cause execution to pause and nodes will be left running for interactive debugging.
@sdaftuar
Tree-SHA512: 01cfae15fa3f04ed6ec6a99fef60a6c6a59723429309e81eacd6767caf12f5758f59b337804291ecab33a38a2958f36e2b513d201bee72a2eeb207a67046f952
faa76d1b7 qa: Fix inv race in example_test (MarcoFalke)
Pull request description:
There have been intermittent test failures on this script.
```py
File "./test/functional/example_test.py", line 216, in run_test
assert_equal(block, 1)
AssertionError: not(2 == 1)
```
Probably the simplest way to fix them is overriding the `on_inv` method, so that no "colliding" getdata for the blocks are sent out.
Additionally, all getdata are now sent in a single message.
Tree-SHA512: 809c2bbfa90a67fc97905769fcbe90ba9abe1aac1f145530934f56a364835973b94d3302b6be68f4f2987acf333bce146bcc4c878c283301871ba5bb1a9bedb6
This commit adds basic keypool mark-used and topup:
- try to topup the keypool on initial load
- if a key in the keypool is used, mark all keys before that as used and
try to top up
13b1e9a16 Capitalize bullet points in CONTRIBUTING guide (Evan Klitzke)
Pull request description:
English grammar dictates that these bullet points should be capitalized.
This also makes the capitalization style consistent with the rest of the
document, e.g. the "Decision Making Process" section.
Tree-SHA512: 59f5a8941180ff3862ba63d364c27fd83d2e144299a71b2e784d58f806e8a02d7951dcc80fcc7152d0c78c2d1f5a22db1236af7ea6b9abece8dbe93533e4b65c
4ccc12a54 [qa] Rewrite BIP66 functional tests (Suhas Daftuar)
d4f0d87b6 [qa] Rewrite BIP65 functional tests (Suhas Daftuar)
Pull request description:
After 122786d0e0, BIP65 and BIP66 activate at
particular fixed heights (without regard to version numbers of blocks
below those heights). Rewrite the functional tests to take
this into account, and remove two tests that weren't really testing anything.
Moves the rewritten functional tests out of the extended test suite, so that they run in travis regularly.
Note: I discovered that the ComparisonTestFramework (which the original versions of these p2p tests were written is, has a bug that caused them to not catch obvious errors, eg if you just comment out setting the script flags for these softforks in ConnectBlock, the versions of these tests in master do not fail(!) -- will separately PR a fix for the comparison test framework).
Tree-SHA512: 2108b79951f2e980854d0d14ccc0fd1810a43dd4251fd6e3b203e7f104ea55e00650bb1a60a28c2801b4249f46563a8559ac3e3cd39db220914acfed0b3b163d
English grammar dictates that these bullet points should be capitalized.
This also makes the capitalization style consistent with the rest of the
document, e.g. the "Decision Making Process" section.
In v0.15, we disconnect nodes that send us version messages with
unsupported service bits (1 << 5 and 1 << 7). This commit adds a test
that bitcoind will disconnect those nodes before August 1st 2018, and won't
disconnect those nodes after August 1st 2018.
e222dc2 Replace ismine with producesignature check in witnessifier (Andrew Chow)
Pull request description:
Instead of using ismine to check whether an address can be spent by us, make the witness version of the script or address first and then use ProduceSignature with the DummySignatureCreator to check if we can
solve for the script.
This is to fix cases where we don't have all of the private keys (for something like a multisig address) but have the redeemscript so we can witnessify it.
Tree-SHA512: 371777aee839cceb41f099109a13689120d35cf3880cde39216596cc2aac5cc1096af7d9cf07ad9306c3b05c073897f4518a7e97f0b88642f1e3b80b799f481e
Instead of using ismine to check whether an address can be spent by us,
make the witness version of the script or address first and then use
ProduceSignature with the DummySignatureCreator to check if we can
solve for the script.
Also fixes test cases to reflect this change.
Raise RPC_WALLET_NOT_SPECIFIED instead of RPC_METHOD_NOT_FOUND when a required
wallet filename was not specified in an RPC call.
Also raise more specific RPC_WALLET_NOT_FOUND error instead of
RPC_INVALID_PARAMETER in case an invalid wallet was specified, for consistency.
This reverts commit d64ac3f4aa after further discussion.
Tree-SHA512: db1e4ff5b17bcd6fd000a3d21aa74f6b7e4c194e0663c1896a100612671910a7cdadd896b59642420ea016598895b54a8468914847ebefef105a3c47c311d4b2
d64ac3f [tests] Allow tests to pass when stderr is non-empty (Jonas Schnelli)
Pull request description:
Resurrect #10241 with nits addressed
Not sure how much people want this. Would be useful for functional tests which cause bitcoind to print to stderr.
Tree-SHA512: 28caccf7818fb3ed5a38caef7f77161b1678aa9b8fd12c2d1e76032f409f0d33c40f7ac91e0c8d908df4a44fd01cf97d657a08bae50c6ff17d07f5b2e20c3a6e
876e92b Testing: listsinceblock should display all transactions that were affected since the given block, including transactions that were removed due to a reorg. (Karl-Johan Alm)
f999c46 listsinceblock: optionally find and list any transactions that were undone due to reorg when requesting a non-main chain block in a new 'removed' array. (Karl-Johan Alm)
Pull request description:
The following scenario will not notify the caller of the fact `tx0` has been dropped:
1. User 1 receives BTC in tx0 from utxo1 in block aa1.
2. User 2 receives BTC in tx1 from utxo1 (same) in block bb1
3. User 1 sees 2 confirmations at block aa3.
4. Reorg into bb chain.
5. User 1 asks `listsinceblock aa3` and does not see that tx0 is now invalidated.
See `listsinceblock.py` commit for related test.
The proposed fix is to iterate from the given block down to the fork point, and to check each transaction in the blocks against the wallet, in addition to including all transactions from the fork point to the active chain tip (the current behavior). Any transactions that were present will now also be listed in the `listsinceblock` output in a new `replaced` array. This operation may be a bit heavy but the circumstances (and perceived frequency of occurrence) warrant it, I believe.
Example output:
```Python
{
'transactions': [],
'replaced': [
{
'walletconflicts': [],
'vout': 1,
'account': '',
'timereceived': 1485234857,
'time': 1485234857,
'amount': '1.00000000',
'bip125-replaceable': 'unknown',
'trusted': False,
'category': 'receive',
'txid': 'ce673859a30dee1d2ebdb3c05f2eea7b1da54baf68f93bb8bfe37c5f09ed22ff',
'address': 'miqEt4kWp9zSizwGGuUWLAmxEcTW9bFUnQ',
'label': '',
'confirmations': -7
}
],
'lastblock': '7a388f27d09e3699102a4ebf81597d974fc4c72093eeaa02adffbbf7527f6715'
}
```
I believe this addresses the comment by @luke-jr in https://github.com/bitcoin/bitcoin/pull/9516#issuecomment-274190081 but I could be wrong..
Tree-SHA512: 607b5dcaeccb9dc0d963d3de138c40490f3e923050b29821e6bd513d26beb587bddc748fbb194503fe618cfe34a6ed65d95e8d9c5764a882b6c5f976520cff35
6b4f231 Move transaction combining from signrawtransaction to new RPC (Andrew Chow)
Pull request description:
Create a combinerawtransaction RPC which accepts a json array of hex raw transactions to combine them into one transaction. Signrawtransaction is changed to no longer combine transactions and only accept one transaction at a time.
The tests have been updated to test this. Tests for the signrawtransaction merge have also been removed.
This is part of #10570
Tree-SHA512: 035aebbd6537c1c017d5c8e06d309228b4c23fe52d5b31ffde19741c81a11a6346ddbbdc582b77b02a47f4c22b1952b69d3c2ee1109c29b3f0f1b612d8de53ed
Create a combinerawtransaction RPC which accepts a json array of hex raw
transactions to combine them into one transaction. Signrawtransaction is changed
to no longer combine transactions and only accept one transaction at a time.
cf82a9e Do not allow users to get keys from keypool without reserving them (Matt Corallo)
Pull request description:
fundrawtransaction allows users to add a change output and then
not have it removed from keypool. While it would be nice to have
users follow the normal CreateTransaction/CommitTransaction process
we use internally, there isnt much benefit in exposing this option,
especially with HD wallets, while there is ample room for users to
misunderstand or misuse this option.
This partially reverts #9377. Would be nice to get this for 15 since its kinda crazy we have this option to begin with IMO, will need release notes as an RPC option is now ignored.
Tree-SHA512: 72b5ee9c4a229b84d799dfb00c56fe80d8bba914ce81a433c3f5ab325bf9bf2b839ee658c261734f0ee183ab19435039481014d09c41dbe155e6323e63beb01d
fundrawtransaction allows users to add a change output and then
not have it removed from keypool. While it would be nice to have
users follow the normal CreateTransaction/CommitTransaction process
we use internally, there isnt much benefit in exposing this option,
especially with HD wallets, while there is ample room for users to
misunderstand or misuse this option.
This could be particularly nasty in some use-cases (especially
pre-HD-split) - eg a user might fundrawtransaction, then call
getnewaddress, hand out the address for someone to pay them, then
sendrawtransaction. This may result in the user thinking they have
received payment, even though it was really just their own change!
This could obviously result in needless key-reuse.
zapwallettxes previously did not interact well with persistent mempool.
zapwallettxes would cause wallet transactions to be zapped, but they
would then be reloaded from the mempool on startup. This commit softsets
persistmempool to false if zapwallettxes is enabled so transactions are
actually zapped.
11ba8e9 [tests] rename getblocktemplate_proposals.py to mining.py (John Newbery)
b29dd41 [tests] add test for submit block (John Newbery)
9bf0d80 [tests] run successful test in getblocktemplate first (John Newbery)
82dc597 [tests] don't build blocks manually in getblocktemplate test (John Newbery)
f82c709 [tests] clarify assertions in getblocktemplate test (John Newbery)
66c570a [tests] Don't build the coinbase manually in getblocktemplate test (John Newbery)
38b38cd [tests] getblocktemplate_proposals.py: add logging (John Newbery)
0a3a5ff [tests] Fix flake8 warnings in getblocktemplate tests (John Newbery)
32cffe6 [tests] Fix import order in getblocktemplate test (John Newbery)
Tree-SHA512: a51a57314fa1c4c4b8a7896492ec6e677b6bed12387060def34a62e9dfbee7961f71bb5553fbd70028be61ae32eccf13fd255fa9651f908e9a5e64c28f43f00e
bc7d103 Fix multi_rpc test for hosts that dont default to utf8 (Matt Corallo)
Tree-SHA512: 7644b1f50d4010a08aed5d1c87ab7326af9c109ac05dfbfc4bb6d5a19ace7997ef9cdd64d4301072f1106225de6d3aacccb17f53043b55ba61f5723c2b65af30
Rewrite the BIP66 functional tests to reflect height-based activation,
and move it out of the extended test suite.
Remove the unnecessary bipdersig.py test
After 122786d0e0, BIP65 activates at
a particular height (without regard to version numbers of blocks
below that height). Rewrite the BIP65 functional tests to take
this into account, and add a test case that exercises
OP_CHECKLOCKTIMEVERIFY in a block where the soft-fork is active.
Also moves the bip65 functional test out of the extended test suite.
This commit moves functions start_node, start_nodes, stop_node and
stop_nodes functions into the BitcoinTestFramework class. It also moves
the bitcoind_processes dict and coverage variables into BitcoinTestFramework.
176c021 [qa] Test non-atomic chainstate writes (Suhas Daftuar)
d6af06d Dont create pcoinsTip until after ReplayBlocks. (Matt Corallo)
eaca1b7 Random db flush crash simulator (Pieter Wuille)
0580ee0 Adapt memory usage estimation for flushing (Pieter Wuille)
013a56a Non-atomic flushing using the blockchain as replay journal (Pieter Wuille)
b3a279c [MOVEONLY] Move LastCommonAncestor to chain (Pieter Wuille)
Tree-SHA512: 47ccc62303f9075c44d2a914be75bd6969ff881a857a2ff1227f05ec7def6f4c71c46680c5a28cb150c814999526797dc05cf2701fde1369c06169f46eccddee
Adds new functional test, dbcrash.py, which uses -dbcrashratio to exercise the
logic for recovering from a crash during chainstate flush.
dbcrash.py is added to the extended tests, as it may take ~10 minutes to run
Use _Exit() instead of exit() for crash simulation
This eliminates stderr output such as:
terminate called without an active exception
or
Assertion failed: (!pthread_mutex_destroy(&m)), function ~recursive_mutex, file /usr/local/include/boost/thread/pthread/recursive_mutex.hpp, line 104.
Eliminating the stderr output on crash simulation allows testing with
test_runner.py, which reports a test as failed if stderr is produced.
A few "a->an" and "an->a".
"Shows, if the supplied default SOCKS5 proxy" -> "Shows if the supplied default SOCKS5 proxy". Change made on 3 occurrences.
"without fully understanding the ramification of a command" -> "without fully understanding the ramifications of a command".
Removed duplicate words such as "the the".
279fde5 Check for rpcuser/rpcpassword first then for cookie (Andrew Chow)
3ec5ad8 Add test for rpcuser/rpcpassword (Andrew Chow)
c53c983 Replace cookie auth in tests (Andrew Chow)
Tree-SHA512: 21efb84c87080a895cac8a7fe4766738c34eebe9686c7d10af1bf91ed4ae422e2d5dbbebffd00d34744eb6bb2d0195ea3aca86deebf085bbdeeb1d8b474241ed
This has no effect on the outcome of test cases, but
prints shorter and less confusing tracebacks on fails.
I.e. does not print an obvious "ConnectionRefusedError"
when shutting down the nodes due to an invalid return code.
Better to check that rpcuser and rpcpassword exist then to check for
the cookie in the test framework.
Name an argument for consistency in p2p-segwit.py
0a4912e [tests] timeout integration tests on travis after 20 minutes (John Newbery)
7c51e9f [tests] destroy zmq context in zmq_tests.py (John Newbery)
b1bac1c [tests] in zmq test, timeout if message not received (John Newbery)
5ebd5f9 [tests] tidy up zmq_test.py (John Newbery)
4a0c08f [tests] update zmq test to use correct config.ini file (John Newbery)
Tree-SHA512: 5e607af2f2dc5c73fba4b2d3890097580a7525f6a4996c7c78f01822e45e0054fd0a225ea53fce6308804e560cced6de6cf5d16137469dcf100b2e9643e08d03
6294f32 gettxoutproof() should return consistent result (John Newbery)
Tree-SHA512: 1c36f78ea07a3bdde09e9494207b4372d54bcd94ed2d56e339e78281f6693e26a93e4c3123453d5c0f6e994d0069d5a1c806786c4af71864f87ea4841611c379
We can call gettxoutproof() with a list of transactions. Currently, if
the first transaction is unspent (and all other transactions are in the
same block), then the call will succeed. If the first transaction has
been spent, then the call will fail. The means that the following two
calls will return different results:
gettxoutproof(unspent_tx1, spent_tx1)
gettxoutproof(spent_tx1, unspent_tx1)
This commit makes behaviour independent of transaction ordering by looping
through all transactions provided and trying to find which block they're in.
This commit also increases the test coverage and tests more failure
cases for gettxoutproof()
9a5a1d7 RPC/rawtransaction: createrawtransaction: Check opt_into_rbf when provided with either value (Luke Dashjr)
23b0fe3 bitcoin-tx: rbfoptin: Avoid touching nSequence if the value is already opting in (Luke Dashjr)
b005bf2 Introduce MAX_BIP125_RBF_SEQUENCE constant (Luke Dashjr)
575cde4 [bitcoin-tx] add rbfoptin command (Jonas Schnelli)
5d26244 [Tests] extend the replace-by-fee test to cover RPC rawtx features (Jonas Schnelli)
36bcab2 RPC/Wallet: Add RBF support for fundrawtransaction (Luke Dashjr)
891c5ee Wallet: Refactor FundTransaction to accept parameters via CCoinControl (Luke Dashjr)
578ec80 RPC: rawtransaction: Add RBF support for createrawtransaction (Luke Dashjr)
Tree-SHA512: 446e37c617c188cc3b3fd1e2841c98eda6f4869e71cb3249c4a9e54002607d0f1e6bef92187f7894d4e0746ab449cfee89be9f6a1a8831e25c70cf912eac1570
8ad5bde Merge bctest.py into bitcoin-util-test.py (John Newbery)
95836c5 Use shared config file for functional and util tests (John Newbery)
89fcd35 Use an .ini config file for environment vars in bitcoin-util-test.py (John Newbery)
e9265df Change help_text in bitcoin-util-test.py to a docstring. (John Newbery)
ce58e93 Change bitcoin-util-test.py to use Python3 (John Newbery)
Tree-SHA512: 66dab0b4a8546aee0dfaef134a165f1447aff4c0ec335754bbc7d9e55909721c62f09cdbf4b22d02ac1fcd5a9b66780f91e1cc4d8687fae7288cc9072a23a78f
cc36b5e [test] Add test for getchaintxstats (Jimmy Song)
Tree-SHA512: a992b55f945118ad7410ab8d7ae7d2696e94a2d4a861d633f4501c439364027e2fddd522cb8b5ed3eb621ec4ed0e9fc683e0139aa6c2e2e27c361640f85f1876
930deb9 [tests] skipped tests should clean up after themselves (John Newbery)
Tree-SHA512: ed486c1cf144c223efa738a66e8bb407089a23002871ef5b15c43d4c08641038a20253fc286853b457d66f37a52c81c16f7988aef90635ac262df6ce7bab9b18
589827975 scripted-diff: various renames for per-utxo consistency (Pieter Wuille)
a5e02bc7f Increase travis unit test timeout (Pieter Wuille)
73de2c1ff Rename CCoinsCacheEntry::coins to coin (Pieter Wuille)
119e552f7 Merge CCoinsViewCache's GetOutputFor and AccessCoin (Pieter Wuille)
580b02309 [MOVEONLY] Move old CCoins class to txdb.cpp (Pieter Wuille)
8b25d2c0c Upgrade from per-tx database to per-txout (Pieter Wuille)
b2af357f3 Reduce reserved memory space for flushing (Pieter Wuille)
41aa5b79a Pack Coin more tightly (Pieter Wuille)
97072d668 Remove unused CCoins methods (Pieter Wuille)
ce23efaa5 Extend coins_tests (Pieter Wuille)
508307968 Switch CCoinsView and chainstate db from per-txid to per-txout (Pieter Wuille)
4ec0d9e79 Refactor GetUTXOStats in preparation for per-COutPoint iteration (Pieter Wuille)
13870b56f Replace CCoins-based CTxMemPool::pruneSpent with isSpent (Pieter Wuille)
05293f3cb Remove ModifyCoins/ModifyNewCoins (Pieter Wuille)
961e48397 Switch tests from ModifyCoins to AddCoin/SpendCoin (Pieter Wuille)
8b3868c1b Switch CScriptCheck to use Coin instead of CCoins (Pieter Wuille)
c87b957a3 Only pass things committed to by tx's witness hash to CScriptCheck (Matt Corallo)
f68cdfe92 Switch from per-tx to per-txout CCoinsViewCache methods in some places (Pieter Wuille)
000391132 Introduce new per-txout CCoinsViewCache functions (Pieter Wuille)
bd83111a0 Optimization: Coin&& to ApplyTxInUndo (Pieter Wuille)
cb2c7fdac Replace CTxInUndo with Coin (Pieter Wuille)
422634e2f Introduce Coin, a single unspent output (Pieter Wuille)
7d991b55d Store/allow tx metadata in all undo records (Pieter Wuille)
c3aa0c119 Report on-disk size in gettxoutsetinfo (Pieter Wuille)
d34242430 Remove/ignore tx version in utxo and undo (Pieter Wuille)
7e0032290 Add specialization of SipHash for 256 + 32 bit data (Pieter Wuille)
e484652fc Introduce CHashVerifier to hash read data (Pieter Wuille)
f54580e7e error() in disconnect for disk corruption, not inconsistency (Pieter Wuille)
e66dbde6d Add SizeEstimate to CDBBatch (Pieter Wuille)
Tree-SHA512: ce1fb1e40c77d38915cd02189fab7a8b125c7f44d425c85579d872c3bede3a437760997907c99d7b3017ced1c2de54b2ac7223d99d83a6658fe5ef61edef1de3
This commit marks the start/stop functions in util.py as private module
functions. A future PR will remove these entirely and move the
functionality directly into the BitcoinTestFramework class, but setting them as
private in this PR will prevent anyone from accidentally calling them
before that future PR is merged.
This makes the following changes:
* In undo data and the chainstate database, the transaction nVersion
field is removed from the data structures, always written as 0, and
ignored when reading.
* The definition of hash_serialized in gettxoutsetinfo is changed to no
longer incude the nVersion field. It is renamed to hash_serialized_2
to avoid confusion. The new definition also includes transaction
height and coinbase information, as this information was missing
before.
This depends on having a CHashVerifier-based undo data checksum
verifier.
Apart from changing the definition of serialized_hash, downgrading
after using this patch is supported, as no release ever used the value
of nVersion field in UTXO entries.
38bc1ec Make more json-like output from estimaterawfee (Alex Morcos)
2d2e170 Comments and improved documentation (Alex Morcos)
ef589f8 minor cleanup: remove unnecessary variable (Alex Morcos)
3ee76d6 Introduce a scale factor (Alex Morcos)
5f1f0c6 Historical block span (Alex Morcos)
aa19b8e Clean up fee estimate debug printing (Alex Morcos)
10f7cbd Track first recorded height (Alex Morcos)
3810e97 Rewrite estimateSmartFee (Alex Morcos)
c7447ec Track failures in fee estimation. (Alex Morcos)
4186d3f Expose estimaterawfee (Alex Morcos)
2681153 minor refactor: explicitly track start of new bucket range and don't update curNearBucket on final loop. (Alex Morcos)
1ba43cc Make EstimateMedianVal smarter about small failures. (Alex Morcos)
d3e30bc Refactor to update moving average on fly (Alex Morcos)
e5007ba Change parameters for fee estimation and estimates on all 3 time horizons. (Alex Morcos)
c0a273f Change file format for fee estimates. (Alex Morcos)
Tree-SHA512: 186e7508d86a1f351bb656edcd84ee9091f5f2706331eda9ee29da9c8eb5bf67b8c1f2abf6662835560e7f613b1377099054f20767f41ddcdbc89c4f9e78946d
d4668f3 [test] Add test for getmemoryinfo (Jimmy Song)
Tree-SHA512: f5285022504f7f3a5d85981c7c424e5cf1156167dbc4209933ea2a699b741e427f4f908f6d49435376c0e23347db24eb1129b74805cbfce5e0b4ce9e48f71fb0
fac79e4 qa: Warn when specified test is not found (MarcoFalke)
Tree-SHA512: d11ecdde275309b12e23155f6cd8e26c99217436b5094a70dd51b95ae7688754227628dd9a801eb6a52ff3ebea4420938e2fc8e9dc9cd77a4dd5c28d2b822354
de487b7 Tests: Add test for getnetworkhashps (Jimmy Song)
Tree-SHA512: b1418ad904618f639ffa34dd40906692aff1fdf1a0d13a9af00039e7a6a2b758091734b89c0c91e8d455da6b15a0e435a9a9ca97a41d97bf395b844c761ffa27
Change the logic of estimateSmartFee to check a 60% threshold at half the target, a 85% threshold at the target and a 95% threshold at double the target. Always check the shortest time horizon possible and ensure that estimates are monotonically decreasing. Add a conservative mode, which makes sure that the 95% threshold is also met at longer time horizons as well.
Checks memory before and after a transaction that requires a private key.
Each time, 32 bytes of memory for a private key should be used.
Tested in wallet.py instead of its own file to save testing time.
329ac3b [tests] use wait_until in mempool_persist.py (John Newbery)
Tree-SHA512: 3f5fe3dcdb5da3b10a41f7b88d29c15b79c02fbb037914b4342b77428f2afe8b342f6adacb28a9eb5549aa156cd146175389bd61909a20df3fecb88361c4779f
20187e4 test: Add elapsed time to RPC tracing (Wladimir J. van der Laan)
Tree-SHA512: f271acedd14020cf911711577f6dd940850fa84d2577618af06a2247c940fcc5b339a86c1c7a179899c556d217a6c967c785fb311bba43a9b6073cbe470b6737
4550049 Reorganize BitcoinTestFramework class (John Newbery)
b7dd44c Add start and stop node methods to BitcoinTestFramework (John Newbery)
b111324 move initialize_chain() and initialize_chain_clean() to be methods of BitcoinTestFramework (John Newbery)
Tree-SHA512: 17e541aea8ca4c0d1189701499384e26239e2d5905de8adb0f042d3cf4c0bbed79fcaad61d563e1743bf4c62ad4915cebb4714783db839d9c53dfbbedcae6e9a
f19abd9 [qa] Fixes segwit block relay test after inv-direct-fetch was disabled (Suhas Daftuar)
Tree-SHA512: 4df0074cbf3d9d31b7906026dc3296b143c252a81aef47eee0bcdf6cddc2501f83cb8d1b5a13256f9d7e889306d4435f260c1fa827573ae8569bb241a89a5f82
This test was passing because we never fetch blocks if we only receive
an inv and not the header (after 037159cebf),
and this test wasn't delivering the header.
Policy limits (such as chain limits and mempool total size) could reasonably
be enforced more aggressively during a reorg, so use resendwallettransactions
to repopulate the mempool to avoid mined blocks being too small, and increase
the chain limits from the default for this test.
This is in preparation for a change in mempool behavior during a reorg.
The functional tests and util tests both require a config file that is
generated by ./configure. This commit merges those two config
files into a single configuration file that can be shared by both tests.
The config from config.ini is put into a Namespace object to maintain
the interface with bctest.py. A future commit could change this
interface to use a dictionary instead of a namespace.
a750d77 Add tests for mempool persistence (John Newbery)
91c91e1 Control mempool persistence using a command line parameter. (John Newbery)
Tree-SHA512: 157d01cefd1903b8bfc5cbab42a3cc5e9c1094179bf4b64b3d34c0d4d9b976d593755bfea5c41c631cb758e1de17c6c2058c130d487d20560b7c0bafcddfa520
b8251f6 [tests] allow zmq test to be run in out-of-tree builds (John Newbery)
Tree-SHA512: 6946d23bc8a0b57e841a6811989182732d0534989e0e3b94421387f7971379b25a25d238cad22272e04076293275f6e980c8a713fce87ba48c1c4463d9243051
dadfee3 [test] Add test for listaddressgroupings (Jimmy Song)
Tree-SHA512: 21cf0233c7fcf585f9a31306612ae1113ea916d2972b834efef0cb2154bd4dd24d9746d0632c778c699328f7e7a336d2da6e2bac9f0fb657c30290757563ad22
d6732d8 [tests] update disconnect_ban.py test case to work with listbanned (John Newbery)
77c54b2 [net] listbanned RPC and QT should show correct banned subnets (John Newbery)
Tree-SHA512: edd0e43377d456260d2697213c2829f8483630f3a668b6707d52605faefa610d951d10e6f22a95eff483cbd14faa8ac9b69fa7d3c0b5735c5f3df23fd71282e0
7c58863 [Wallet] unset change position when there is no change on exact match (Gregory Sanders)
Tree-SHA512: ce8b9337e4132e32d80f954258d50938052c833a48e39431649d6adb16e3d18626a0ae5d300827e7fa397927fba72a1f066cb31af9b0a3ef7f1feb6024461626
* Split run_test into 4 separate tests
* Add 2 tests, getconnectioncount and getnettotals
* getnettotals - Strategy of test is to get the network stats before and after a ping. The difference in bytes sent/received is the bytes needed for a ping/pong.
6803e09 Move zmq test skipping logic into individual test case. (John Newbery)
Tree-SHA512: 9d166b53e9acf386c4dafc860b38e2901b331a7505bba9714a2f4e3bdef68b0316c8b76fddbfb620835ddee549cf32fffb3a96a19b0799ad94f2553f55f19a35
821dd5e Tests: Add test for getdifficulty (Jimmy Song)
Tree-SHA512: 3da78c4f88efdaab8374582cda606620beb2f1e9a93119a72b67572702c17c36b68c3abf9d466e8c7fb8ba9e8afa9a172e454c553df10d3054f19b3282d3097b
This commit uses the new skip test funcationality added in
232b6665bc to skip the zmq tests if the
python zmq module is not available or if bitcoind has been built without
zmq support.
This removes the zmq-specific logic from test_runner.py. In general it's
better if test_runner.py has no knowledge of special cases for
individual tests and is a general purpose test runner.
All Node classes in individual test cases subclass from NodeConnCB. Many
have duplicate definitions for methods that are defined in the base
class. This commit removes those duplicate definitions.
This commit removes ~290 lines of duplicate code.
This commit adds some helper functions to NodeConnCB which are useful
for many tests:
- NodeConnCB now keeps track of the number of each message type that
it's received and the most recent message of each type. Many tests
assert on the most recent block, tx or reject message.
- NodeConnCB now keeps track of its connection state by setting a
connected boolean in on_open() and on_close()
- NodeConnCB now has wait_for_block, wait_for_getdata,
wait_for_getheaders, wait_for_inv and wait_for_verack methods
I have updated the individual test cases to make sure that there are no
namespace problems that cause them to fail with these new definitions.
Future commits will remove the duplicate code.
637706d Tests: Put Extended tests first when they're included (Jimmy Song)
Tree-SHA512: 0a720b2443b3e65f4ad548ecdf822468460fc4f4ecf32385dd79511a01c9ea4c94f0bf765ca593705b19baee1bae254dfcc3952da64b9c51d75b7da7abcdcd28
maxblocksinflight tested that a node would not send get_data messages
for more than 16 new blocks at the same time. bitcoin core no longer
responds to block invs with get_data, since it does headers-first
sync'ing. This test was therefore testing nothing and can be removed.
the sendheaders test script tests that bitcoin will not send get_headers
for more than 16 blocks simultaneously.
This commit reduces spammy logging by the test framework. It truncates
logging send/receive message in mininode to 500 characters. mininode
was previously logging the entire message sent received, which can be up
to 1MB for a full block.
a4fd89f Make forknotify.py more robust (John Newbery)
1f3d78b Wait for connection to open in bip9-softforks.py (John Newbery)
Tree-SHA512: de7d0002ee62ad97059b6f6c89b11f6e9901e3b4164ef6906bcd61e4ca499c277d9034784755966e5baf599869fad611b0b18f5547a384ceb5b7db3cc5bbd132
sync_with_ping currently returns false if the timeout expires, and it is
the caller's responsibility to fail the test. However, none of the tests
currently assert on sync_with_ping()'s return code. This commit adds an
assert to sync_with_ping so the test will fail if the timeout expires.
This commit also removes all the duplicate implementations of
sync_with_ping() from the individual tests.
p2p-compactblocks was incorrectly using sync_with_ping() when sending in
invalid block. The node would disconnect us and never respond to the
ping, so the sync_with_ping would just time out after 30 seconds and
continue with the test.
This commit adds a send_await_disconnect() method that sends the
message, and then waits for the node to disconnect us. In this commit
I've added the method to p2p-compactblocks.py, but a future commit could
move it to mininode since it could be useful more generally.
This commit reduces the p2p-compactblock runtime by 30 seconds.
4115af7 Fix rebase issue where pwalletMain was used instead of pwallet Ser./Deser. nInternalChainCounter as last element (Jonas Schnelli)
9382f04 Do not break backward compatibility during wallet encryption (Jonas Schnelli)
1df08d1 Add assertion for CanSupportFeature(FEATURE_HD_SPLIT) (Jonas Schnelli)
cd468d0 Define CWallet::DeriveNewChildKey() as private (Jonas Schnelli)
ed79e4f Optimize GetOldestKeyPoolTime(), return as soon as we have both oldest keys (Jonas Schnelli)
771a304 Make sure we set the wallets min version to FEATURE_HD_SPLIT at the very first point (Jonas Schnelli)
1b3b5c6 Slightly modify fundrawtransaction.py test (change getnewaddress() into getrawchangeaddress()) (Jonas Schnelli)
003e197 Remove FEATURE_HD_SPLIT bump TODO (Jonas Schnelli)
d9638e5 Overhaul the internal/external key derive switch (Jonas Schnelli)
1090502 Fix superfluous cast and code style nits in RPC wallet-hd.py test (Jonas Schnelli)
58e1483 CKeyPool avoid "catch (...)" in SerializationOp (Jonas Schnelli)
e138876 Only show keypoolsize_hd_internal if HD split is enabled (Jonas Schnelli)
add38d9 GetOldestKeyPoolTime: if HD & HD Chain Split is enabled, response max(oldest-internal-key, oldest-external-key) (Jonas Schnelli)
dd526c2 Don't switch to HD-chain-split during wallet encryption of non HD-chain-split wallets (Jonas Schnelli)
79df9df Switch to 100% for the HD internal keypool size (Jonas Schnelli)
bcafca1 Make sure we always generate one keypool key at minimum (Jonas Schnelli)
d0a627a Fix issue where CDataStream->nVersion was taken a CKeyPool record version (Jonas Schnelli)
9af8f00 Make sure we hand out keypool keys if HD_SPLIT is not enabled (Jonas Schnelli)
469a47b Make sure ReserveKeyFromKeyPool only hands out internal keys if HD_SPLIT is supported (Jonas Schnelli)
05a9b49 Fix wrong keypool internal size in RPC getwalletinfo help (Jonas Schnelli)
01de822 Removed redundant IsLocked() check in NewKeyPool() (Jonas Schnelli)
d59531d Immediately return setKeyPool's size if HD or HD_SPLIT is disabled or not supported (Jonas Schnelli)
02592f4 [Wallet] split the keypool in an internal and external part (Jonas Schnelli)
Tree-SHA512: 80d355d5e844b48c3163b56c788ab8b5b5285db0ceeb19858a3ef517d5a702afeca21dbae526d7b8fb4101c2a745af1d92bf557c40cf516780f17992bf678c1a
forknotify would intermittently fail because the alert file was not
being written fast enough. This commit adds a timeout so the test does
not fail immediately.
bip9-sofforks.py stop-starts the bitcoind node twice during the test
run, but it doesn't wait for the connection from mininode to open before
continuing with the test. This leads to race conditions where the test
can fail getblocktemplate() because it has no p2p connections.
This commit merges the NodeConnCB and SingleNodeConnCB into a single
class (called NodeConnCB). The original intent for the NodeConnCB was to
be able to have a python 'mininode' connect to multiple running
bitcoinds. This has never been used and can be achieved more easily by
having multiple NodeConns backed by a common datastore if it is ever
needed.
The changes in mininode.py are just code moves (and merging the two
classes into a single class). The code changes in the individual test
cases are changing the subclasses to subclass from NodeConnCB instead of
SingleNodeConnCB. There is a lot of duplicate code in the subclasses
that can be removed in future commits.
fa4535d [qa] combine_logs: Use ordered list for logfiles (MarcoFalke)
Tree-SHA512: 66da6f2659018d24b1cac1f6d2ee8603c2c6f15ce5aff456e8e4b208874e97c7046b97112046d5b45bfd777b405771a3ad0a55036c4f4cdeec06842563af2c4d
29d6634 Check that all test scripts in test/functional are being run (John Newbery)
Tree-SHA512: 9231d3a119632be031c51c4f7e95a8adae58489a8ec36fc967d499c0708bae2941a3bf28f11dcd4efd59141eb54c3c920f2629f5cd8a0139d30397a19591666d
rpt-tests.py outputs progress information as it runs tests. This commit
adds a --quiet option that suppresses that progress output and only
prints a summary of results (and logs from failed tests).
b1f584d fix build if spaces in src dir path (Matthew Zipkin)
Tree-SHA512: 5834690c1f63b85ed04bb8ed411a94da04738534364d58bd9ee333ccff7129b2bbb710f31598c40123199e023da02c1745514294af3efdbb2c2e4c1320aded35
assumevalid was merged as part of PR 9484, but was not added to the
test_runner, so is not run even as part of the extended tests.
This commit adds assumevalid to the list of tests in test_runner. It
also clarifies the code in assumevalid considerably.
0c1ade6 Skip rpcbind_test if OS/network requirements are not met. (John Newbery)
232b666 Allow test cases to be skipped (John Newbery)
Tree-SHA512: d90c956ba6e27e53f422cba6267bdcc60faef9370a7e66b7f6480137f84d9a813442ac477b20fbbc540be2b4636928be910c46e221570ab3b9a5b9f0f11f7fc8
Currently, functional test cases can either pass or fail. There are
occasions when it is helpful to skip tests, for example if the
system they are running on does not meet the requirements for the test.
The rest of the test suite can run without being marked as a failure.
This commit adds framework for tests to skip if their requirements
aren't met.
This commit adds a tool for combining log files from multiple instances
of bitcoinds as well as the test_framework.log file. This gives a
combined view of what the test framework and all bitcoin instances were
doing during a qa test.
Change bumpfee tests to use the spend_one_input function instead of the
create_fund_sign_send function. The latter function would choose transaction
inputs and fees in unpredictable ways depending on the order that tests ran,
which meant that adding new tests could cause old tests to fail, and in general
made bumpfee.py fragile and unpleasant to work with.
