* Add BIP9 parameters for DIP3 deployment on testnet
* Remove autoix BIP9 deployment and reuse DIP3 deployment
* Add BIP9CheckMasternodesUpgraded to chain params
This controls if miners should check for upgraded masternodes first before
adding BIP9 bits to the block version. This only makes sense in network
where masternodes are up and running before BIP9 activation, which is not
necessarely the case in regtest and devnet.
Also refactor ComputeBlockVersion to use fCheckMasternodesUpgraded instead
of the inverse fAssumeMasternodeIsUpgraded. It is set to false by default
and only set to true in CreateNewBlock.
* Check for upgraded masternodes for DIP3 activation (only mainnet and testnet)
* Bump PROTOCOL_VERSION and DMN_PROTO_VERSION
We probably have nodes with 70211 already running on testnet.
* Implement RemoveAskFor to indicate that we're not interested in an item anymore
When an INV item is received from the first node, the item is requested
immediately. If the same item is received from another node, an entry is
added to mapAskFor which marks the item for re-requesting in case the first
node did not respond. When the item is received from the first node,
the item was previously never removed from mapAskFor. Only the later getdata
loop in SendMessages would then gradually remove items from the map. This
is quite delayed however as the entries in mapAskFor have a timeout value.
RemoveAskFor allows to remove all entries from mapAskFor and setAskFor
when we are not interested in the item anymore (e.g. because we received
it already).
* Call RemoveAskFor whenever we receive a message
* Only pass hash instead of CInv object to RemoveAskFor
* Add pooled_secure_allocator and mt_pooled_secure_allocator
* Use mt_pooled_secure_allocator for BLS secure allocation
The old solution relied on thread-local-storage and was thus not compatible
to libc6 2.11 (which is the minimum supported version we use).
Also, the old solution turned out to be erroneous. It would have crashed
or memory leaked when ownership of CBLSPrivateKey would be handled over
to another thread.
* Add new header files to Makefile.am
* Fix copyright headers of new files
* Bail out early from secure deallocation
* Clean up global BLS keys when shutting down
Specify masternodeblsprivkey which is required in masternode mode now.
This should fix IS test failures which occur because of `Warning: You should specify a masternodeblsprivkey in the configuration. Please see documentation for help.` init error (there are other issues, so auto-IS test are still going to fail).
* Remove global fDIP0003ActiveAtTip flag and always use VersionBitsState
fDIP0003ActiveAtTip was used much more often when introduced but turned out
to be not very useful in most places. Always use VersionBitsState now.
* Fix wrong use of VersionBitsState auto IX
* Make sure isAutoLockBip9Active flag is reset in case of chain reorgs
* Pass CCoinsView reference to special TX handling methods
* Allow referencing other TX outputs for ProRegTx collateral
* Remove "collateralAmount" from "protx register"
* Rename "protx register" to "protx fund_register"
* Remove UpdateSpork15Value from CDeterministicMNManager
Was not used/implemented anymore
* Lock masternode collaterals after chain/DIP3 is fully initialized
Otherwise detection of collaterals does not work.
* Implement new "protx register" RPC which uses existing collaterals
* Remove "masternode info" RPC
It is not consistent with other "masternode" RPCs anymore as it requires
the ProRegTx hash while all other RPCs work with the collateral.
* Load sporks from disk cache before initializing the chain
Otherwise spork15 is not loaded when we check it for the first time.
* Implement "protx info" RPC
* Use "protx info" instead of "masternode info" in DIP3 tests
* Test external collaterals for ProTx
* Handle review comments
* Don't pass CCoinView reference when it's not used
* Revert "Pass CCoinsView reference to special TX handling methods"
This reverts commit 28688724e1.
* Use GetUTXOCoin instead of now removed coinsView
Also remove collateral height check as GetUTXOCoin only returns confirmed
coins.
* Add conflict handling for external collaterals to mempool
* Handle review comments (squashed Github suggestions)
Co-Authored-By: codablock <ablock84@gmail.com>
* Clear devNetParams and mimic behavior of other param types
Mainnet, testnet and regtest params are global and thus zero initialized,
we should mimic the same for devnet params.
Not doing so results in all kinds of issues on devnet.
* Remove unnecessary <string.h> includein chainparamsbase.cpp
* Allow to use low difficulty and higher block rewards for devnet
Configurable through -minimumdifficultyblocks, -highsubsidyblocks and -highsubsidyfactor
* Fix review comments
* Handle review comments
* Remove nProtocolVersion fields from deterministic masternode lists
This field was part of my initial implementation from DIP3. One of the last
changes of DIP3 was then to remove this field, which I did not bring back
into code yet. This commit removes it now.
We use PROTOCOL_VERSION now in cases were compatibility in the the pre-DIP3
list is needed.
* Add type and mode fields in DIP3 special TXs
These were added to DIP3 but not in-code yet.
* Add DMN_PROTO_VERSION
Adds -p option so that `mkdir` does not error if build dir already exists.
Before this change, if chia_bls build failed for some previous reason (e.g. b/c cmake was not installed), the chia_bls build would always fail in the future because the `build` directory already exists. Previous error message:
```
$ make -j4
Configuring chia_bls...
mkdir: cannot create directory ‘build’: File exists
make: *** [/Users/nmarley/projects/dash/depends/work/build/x86_64-apple-darwin18.0.0/chia_bls/b24c15cef6567a855e901b4774d1d22efb063ea9-e5023308c2a/./.stamp_configured] Error 1
```
* Use BLS keys for operator keys
* Add "bls generate" RPC to generate BLS keys
* Use unique_ptr to store blsKeyOperator and blsPubKeyOperator
Needed because the Chia BLS library crashes when keys are created before
the library is initialized, even if keys are not used. This is the case here
as we have static instances here.
* Remove unnecessary CheckSignature calls
This seems to be some garbage I left in by mistake.
* Fixed review comments
* Fix rpc help for operator keys
All keys that are used as examples are random. None of the secret keys
belongs to any of the public keys.
* Use .GetHash() instead of ::SerializeHash() for BLS pubkeys in txmempool.cpp
* Rename mapProTxBlsPubKeys to mapProTxBlsPubKeyHashes
* Move handling of size >= SerSize into SetBuf/GetBuf
Instead of performing this in the individual implementations of
InternalSetBuf and InternalGetBuf
* Assert that size if GetBuf is always SerSize
* create base class for dash-specific tests
* use common base class in p2p-autoinstantsend.py
* use common base class in p2p-instantsend.py
* rename check_IX_lock to wait_for_instantlock
* fix issue with trx amounts precision in autoix-mempool.py
* fix issue with trx amounts precision in p2p-autoinstantsend.py
* fix issue with trx amounts precision in p2p-instantsend.py
* Rallback adding empty line
* Rallback adding empty line
* fix CTxLockRequest::GetMinFee()
* Force regular IS txes to include MIN_FEE * n_inputs fee on creation regardless of auto-IS status
* set_autoix_spork_state should bump mocked time
* make sure IS fee matches the expected one
* turn off spork16 and test all types of txes again
* Alternative solution: pick rounds with the most inputs available to mix first
* randomly skip some inputs when we have at least one of this denom already
* More randomization in PrepareDenominate
* fix `vecSteps[nBit] >= 1 ?` and adjust speed/privacy ratio for more speed i.e. `GetRandInt(5) == 0`
* fix typos
* no comments
* remove vector, extra loop in cleanup function
This commit removes 2 loops and a vector which I don't believe are necessary in
CMasternode::FlagGovernanceItemsAsDirty. I could be missing something, but
can't think of any good reason why this was implemented this way.
* use range operator to range over vectors
* remove deprecated wire message types
* mn: simplify govobj map mgmt a bit
* remove extra semicolons
* invert if/else condition and drop else
* remove if/else logic from Qt
This is the entire purpose of the Get<X>String methods on MNP class.
* Revert "remove deprecated wire message types"
This reverts commit 9de88a3fda.
* Revert "remove if/else logic from Qt"
This reverts commit c0f43c9b85.
