We now have hundreds of MN connections due to the new intra quorum connections,
which means having a limiting semaphore here doesn't make sense anymore. It
actually causes DKG and signing failures as not all necessary connections
can be established.
Masternode connections are still implicitely limited as there is always
only a limited set of LLMQs active.
ee5efad6cf [tests] refactor node_network_limited (John Newbery)
b425131f5a [tests] remove redundant duplicate tests from node_network_limited (John Newbery)
2e02984591 [tests] node_network_limited - remove race condition (John Newbery)
dbfe294805 [tests] define NODE_NETWORK_LIMITED in test framework (John Newbery)
1285312048 [tests] fix flake8 warnings in node_network_limited.py (John Newbery)
Pull request description:
Fixes race condition in the node_network_limited test case introduced in #11740. Also tidies up the test and removes redundant duplicate tests.
Tree-SHA512: a5240fe35509d81a47c3d3b141a956378675926093e658d24be43027b20d3b5f0ba7c6017c8208487a1849d4fdfb911a361911d571423db7c50711250aba3011
12781db [Tests] check specific validation error in miner tests (Sjors Provoost)
Pull request description:
## Problem
`BOOST_CHECK_THROW` merely checks that some `std::runtime_error` is
thrown, but not which one.
Here's an example of how this can cause a test to pass when a developer
introduces a consensus bug. The test for the sigops limit assumes
that `CreateNewBlock` fails with `bad-blk-sigops`. However it can
also fail with bad-txns-vout-negative, if a naive developer lowers
`BLOCKSUBSIDY` to `1*COIN`.
## Solution
`BOOST_CHECK_EXCEPTION` allows an additional predicate function. This
commit uses this for all exceptions that are checked for in
`miner_tets.cpp`:
* `bad-blk-sigops`
* `bad-cb-multiple`
* `bad-txns-inputs-missingorspent`
* `block-validation-failed`
If the function throws a different error, the test will fail. Although the message produced by Boost is a bit [confusing](http://boost.2283326.n4.nabble.com/Test-BOOST-CHECK-EXCEPTION-error-message-still-vague-tt4683257.html#a4683554), it does show which error was actually thrown. Here's what the above `1*COIN` bug would result in:
<img width="1134" alt="schermafbeelding 2017-09-02 om 23 42 29" src="https://user-images.githubusercontent.com/10217/29998976-815cabce-9038-11e7-9c46-f5f6cfb0ca7d.png">
## Other considerations
A more elegant solution in my opinion would be to subclass `std::runtime_error` for each `INVALID_TRANSACTION` type, but this would involve touching consensus code.
I put the predicates in `test_bitcoin.h` because I assume they can be reused in other test files. However [serialize_tests.cpp](https://github.com/bitcoin/bitcoin/blob/v0.15.0rc3/src/test/serialize_tests.cpp#L245) also uses `BOOST_CHECK_EXCEPTION` and it defines the predicate in the test file itself.
Instead of four `IsRejectInvalidReasonX(std::runtime_error const& e)` functions, I'd prefer something reusable like `bool IsRejectInvalidReason(String reason)(std::runtime_error const& e)`, which would be used like `BOOST_CHECK_EXCEPTION(functionThatThrows(), std::runtime_error, IsRejectInvalidReason("bad-blk-sigops")`. I couldn't figure out how to do that in C++.
Tree-SHA512: e364f19b4ac19f910f6e8d6533357f57ccddcbd9d53dcfaf923d424d2b9711446d6f36da193208b35788ca21863eadaa7becd9ad890334d334bccf8c2e63dee1
01013f5 Simplify tx validation tests (Pieter Wuille)
2dd6f80 Add a test that all flags are softforks (Pieter Wuille)
2851b77 Make all script verification flags softforks (Pieter Wuille)
Pull request description:
This change makes `SCRIPT_VERIFY_UPGRADABLE_NOPS` not apply to `OP_CHECKLOCKTIMEVERIFY` and `OP_CHECKSEQUENCEVERIFY`. This is a no-op as `UPGRADABLE_NOPS` is only set for mempool transactions, and those always have `SCRIPT_VERIFY_CHECKLOCKTIMEVERIFY` and `SCRIPT_VERIFY_CHECKSEQUENCEVERIFY` set as well. The advantage is that setting more flags now always results in a reduction in acceptable scripts (=softfork).
This results in a nice and testable property for validation, for which a new test is added.
This also means that the introduction of a new definition for a NOP or witness version will likely need the following procedure (example OP_NOP8 here)
* Remove OP_NOP8 from being affected by `SCRIPT_VERIFY_DISCOURAGE_UPGRADABLE_NOPS`.
* Add a `SCRIPT_VERIFY_DISCOURAGE_NOP8`, which only applies to `OP_NOP8`.
* Add a `SCRIPT_VERIFY_NOP8` which implements the new consensus logic.
* Before activation, add `SCRIPT_VERIFY_DISCOURAGE_NOP8` to the mempool flags.
* After activation, add `SCRIPT_VERIFY_NOP8` to both the mempool and consensus flags.
Tree-SHA512: d3b4538986ecf646aac9dba13a8d89318baf9e308e258547ca3b99e7c0509747f323edac6b1fea4e87e7d3c01b71193794b41679ae4f86f6e11ed6be3fd62c72
6558f8acc [gui] Defer coin control instancing (João Barbosa)
Pull request description:
Defer the GUI coin control instancing so that argument processing
is taken into account for the default coin control values.
Fixes#12312
Tree-SHA512: ecda28b94f4709319e9484b01afe763c7c3569097d2afb89db79da8a195c46d20ea77166df7edce0c8ab77627b295def01c072148714503436d27675d5e75d99
b21244e0be Updating benchmarkmarking.md with an updated sample output and help options (Jeff Rade)
Pull request description:
This PR is just a documentation update for someone (or myself) that looks into finishing up #7883 in the future.
Looked through #7883 and appears [ryanofsky's PR](https://github.com/bitcoin/bitcoin/pull/8873) setup the benchmarks, but there are `FIXME` comments to pull in data from `test/` to get a larger data set (assuming reason why 7883 is still open).
Tree-SHA512: d758efc659c75f2b3ceb376f5a466c4234354077e4671ac3eb901c082c4e519ce5ff592cea4742711050b4ce56a1b65ef69433dd74e7db3eb11a8567d517d9e2
* [tests] Remove mininode periodic (half-hour) ping messages
* [tests] Tidy up mininode
Add docstrings and renames some methods.
Also removes the redundant NodeConn.readable() method override.
* [tests] Move only: move NodeConnCB below NodeConn
This is required since NodeConnCB will inherit from NodeConn
after the next commit.
* [tests] Make NodeConnCB a subclass of NodeConn
This makes NodeConnCB a subclass of NodeConn, and
removes the need for the client code to know
anything about the implementation details of NodeConnCB.
NodeConn can now be swapped out for any other implementation
of a low-level connection without changing client code.
* [tests] Move version message sending from NodeConn to NodeConnCB
This commit moves the logic that sends a version message
on connection from NodeConn to NodeConnCB. NodeConn should
not be aware of the semantics or meaning of the P2P payloads.
* remove witness
Signed-off-by: Pasta <pasta@dashboost.org>
* Fix 11712
Co-authored-by: John Newbery <john@johnnewbery.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
415f86c6ae [scripts] Add missing univalue file to copyright_header.py (fanquake)
Pull request description:
This needs to be added so that PRs like #12062 don't modify the subtree.
Tree-SHA512: 3642bdb0c8271ae700857a79fa5800b0c26c4b3f126d4406f224293817fb74d498fa1fc581d576ae747fbbb6952d4369fc4ab823ab48fd0946c1e8ccbe93cee6
fadf60e381 qa: Note on test order in test_runner (MarcoFalke)
Pull request description:
C.f. #11964
Tree-SHA512: 5f087965093722d9e7a3febddcc187e412bd0636a7ed2da60111668fe3bba6668110e25a38ddcccc0d0aae132611c56fa72f3f0c473fb3fb59e38be445edfcd5
b341143 [build] Add missing stuff to clean-local - test/functional/test_framework/__pycache__ - test/cache (Karl-Johan Alm)
Pull request description:
After doing
```
./autogen.sh && ./configure && make
make clean
make distclean
```
and moving `.gitignore` aside, the following files still remain after this patch:
```
Makefile.in
aclocal.m4
autom4te.cache/
build-aux/compile
build-aux/config.guess
build-aux/config.sub
build-aux/depcomp
build-aux/install-sh
build-aux/ltmain.sh
build-aux/m4/libtool.m4
build-aux/m4/ltoptions.m4
build-aux/m4/ltsugar.m4
build-aux/m4/ltversion.m4
build-aux/m4/lt~obsolete.m4
build-aux/missing
build-aux/test-driver
configure
doc/man/Makefile.in
src/Makefile.in
src/config/bitcoin-config.h.in
```
Most are automake related so I guess it's fine if they litter around.
Tree-SHA512: 7566f56a79932cc1d6ee6ff487d121e3909db57167775e1b27209d93bcc1c14e47b0fcc9c0c272c4b9df907c1bc0664f02006a21b3b6939fa50fc2a5762729e4
31a013563 Add required package dependencies for depends cross compilation [skip-ci] (Jonas Schnelli)
Pull request description:
Stumbled over this during a setup of a new depends compile system.
Related to #8913.
Tree-SHA512: 67e2fdf9ca3cbedeb02982fa73771dd36978b319e9291ea5a41ede7fdf772c4505ccc9523b48fe66ead927f141efefbdf1e3eaa19a9d8a1304861a8ede040056
f30e9be4c1 RPC Docs: gettxout*: clarify bestblock and unspent counts (David A. Harding)
Pull request description:
Expounds on two things I've seen confuse inexperienced users:
- transactions/outputs in `gettxoutsetinfo`: a user thought this was the total number of transactions or outputs ever seen on the chain, whereas it's only the number in the UTXO.
- bestblock in `gettxout`: a user thought this was the block that included the output, not realizing it was the tip of the current best block chain. I also copied this text to `gettxoutsetinfo` for congruency. I skimmed other uses of "bestblock" in the RPC docs and they seemed clear to me.
Tree-SHA512: c2161c497bef5fe15ee9f1e2a4413fa099b5baa36205ba1ba4b3822885b3ccd1badb9c118a0334f47ba6fa7fff5818ac359cfac6a1108c6847a876b1a251bb7c
09c6699900 [qa] Handle disconnect_node race (Suhas Daftuar)
Pull request description:
Several tests call disconnect_nodes() on each node-pair in rapid
succession, resulting in a race condition if a node disconnects a peer
in-between the calculation of the nodeid's to disconnect and the
invocation of the disconnectnode rpc call. Handle this.
Tree-SHA512: 3078cea0006fcb507c812004a777c505eb1e9dda7c6df12dbbe72395a73ff6f6760f597b6492054f5487b34534417ddef5fbad30553c135c288c4b7cfce79223
150b2f0 Default to defining endian-conversion DECLs in compat w/o config (Matt Corallo)
Pull request description:
While this isn't a supported build configuration, some build
systems need to build without going through our autotools steps,
so defaulting to something sane may make it easier to build.
Specifically, this fixes the inability to build
rust-bitcoinconsensus on some non-x86 platforms. It needs to build
without our autotools/configure steps to ensure correct compile
args are passed from the rust build system to gcc. Converting the
args from the rust build system to gcc would be a lot of
unmaintainable work.
Tree-SHA512: 776fdb8c91b66f421fc751cb281c99c53c47e496f46b26c9f49bb6fdb6da3d2dda5dcc1c5bf413206bdd9ff3cbe5cef2823455900462519a4944631d9c48b54c
7d8a8cc Avoid launching as admin when NSIS installer ends. (JeremyRand)
Pull request description:
The Bitcoin Core NSIS script runs with elevated privileges. Unfortunately, this means that it launches Bitcoin Core itself with elevated privileges when the user chooses to launch Bitcoin Core at the end of the installation procedure. This PR works around the issue by having `explorer.exe` launch Bitcoin Core. Seems to be a similar approach to what http://nsis.sourceforge.net/ShellExecAsUser_plug-in does, but without a plugin.
I've tested this with Sysinternals Process Explorer on Windows 10 32-bit. I wouldn't expect any differences in behavior on other Windows releases, but if anyone would like to test on other Windows releases, feel free.
h/t to "UK" at https://mdb-blog.blogspot.se/2013/01/nsis-lunch-program-as-user-from-uac.html?showComment=1410158039989#c2463780017054126736 for the sample code.
Fixes#7990.
Tree-SHA512: f40d6b6e5bb72952dcfbf223b68bfeb9a03bd5638f41b1700f4651f6452ce3fe7468129f6652c4f546210a5fd2521b2574c4b6068c5aea01ed2d719a8a838cd8
40c5886 Fix illegal default `addProxy` and `addrSeparateProxyTor` settings. (251)
Pull request description:
In f05d349 the value of the `addrProxy` and `addrSeparateProxyTor` settings is set to an illegal default value, because the value of `DEFAULT_GUI_PROXY_PORT ` is passed to the `fieldWidth` parameter of the `QString QString::arg(const QString &a, int fieldWidth = 0, QChar fillChar = QLatin1Char( ' ' )) const` method:
29fad97c32/src/qt/optionsmodel.cpp (L129)29fad97c32/src/qt/optionsmodel.cpp (L139)
This will create a default proxy setting that consists of 9053 characters and ends with the string `127.0.0.1:%2`.
This PR attempts to resolve#12623 by setting the correct value for the `addrProxy` and `addrSeparateProxyTor` settings (i) if the proxy setting does not exist; or (ii) if the proxy setting has an illegal value caused by to the aforementioned bug.
The second condition is *only* relevant if we don't want Bitcoin Core 0.16.0 users to explicitly reset their settings to see the correct default proxy port value.
Tree-SHA512: 3dc3de2eb7da831f6e318797df67341ced2076b48f9b561c73677bf6beb67b259d8e413095f290356fb92e32e4e8162d48accbc575c4e612060fd5d6dde7ac8d
util_tests.cpp needs to include the signal.h header on FreeBSD.
Reported by denis2342 on IRC.
Github-Pull: #12447
Rebased-From: dd7e42cbb4
Tree-SHA512: 10ead029bb59f5d69e37b5679c710f22d64051de26e1ec8342eec4e4dec4d76249e16dff78d192972bcb8d139d99c7555a7cb2fe43b2b911103eab6d6f943b79
1d4cbd2 test: Add unit test for LockDirectory (Wladimir J. van der Laan)
fc888bf util: Fix multiple use of LockDirectory (Wladimir J. van der Laan)
Pull request description:
Wrap the `boost::interprocess::file_lock` in a `std::unique_ptr` inside the map that keeps track of per-directory locks.
This fixes a build issue with the clang 4.0.0+boost-1.58.0p8 version combo on OpenBSD 6.2, and should have no effect otherwise.
Also add a unit test, make the function thread-safe, and fix Linux versus Windows behavior inconsistency.
Meant to fix#12413.
Tree-SHA512: 1a94c714c932524a51212c46e8951c129337d57b00fd3da5a347c6bcf6a947706cd440f39df935591b2079995136917f71ca7435fb356f6e8a128c509a62ec32
2f3bd47 Abstract directory locking into util.cpp (MeshCollider)
5260a4a Make .walletlock distinct from .lock (MeshCollider)
64226de Generalise walletdir lock error message for correctness (MeshCollider)
c9ed4bd Add a test for wallet directory locking (MeshCollider)
e60cb99 Add a lock to the wallet directory (MeshCollider)
Pull request description:
Fixes https://github.com/bitcoin/bitcoin/issues/11888, needs a 0.16 milestone
Also adds a test that the lock works.
https://github.com/bitcoin/bitcoin/pull/11687 will probably rework this to a per-wallet lock instead of just the walletdir, but this fixes the current issue
Tree-SHA512: 98e52d67f820e3b8f919cf361ffbb7d928f1bd67603e0ed26c5076ea02d9b3a90c3535ddf7329f3b88171396fa28dd3c87adab3577a8a217bd1e4247bda99138
9c8eca7 Split up key and script metadata for better type safety (Russell Yanofsky)
Pull request description:
Suggested by @TheBlueMatt
https://github.com/bitcoin/bitcoin/pull/11403#discussion_r155599383
Combining the maps was probably never a good arrangement but is more
problematic now in presence of WitnessV0ScriptHash and WitnessV0KeyHash types.
Tree-SHA512: 9263e9c01090fb49221e91d88a88241a9691dda3e92d86041c8e284306a64d3af5e2438249f9dcc3e6e4a5c11c1a89f975a86d55690adf95bf2636f15f99f92a
656fde5 Add script birthtime metadata to dump and import wallet (MeshCollider)
1bab9b2 Add script dump note to RPC help text and release notes (MeshCollider)
68c1e00 Add test for importwallet (MeshCollider)
9e1184d Add dumpwallet scripts test (MeshCollider)
ef0c730 Add scripts to importwallet RPC (MeshCollider)
b702ae8 Add CScripts to dumpwallet RPC (MeshCollider)
cdc260a Add GetCScripts to CBasicKeyStore (MeshCollider)
Pull request description:
As discussed in https://github.com/bitcoin/bitcoin/pull/11289#issuecomment-334600457, adds the CScripts from the wallet to the `dumpwallet` RPC and then allows them to be imported with the `importwallet` RPC. Includes a basic test, and modifies the helptext of the dumpwallet RPC.
Notes:
- Reviewers: use `?w=1` to avoid the indentation-only change in commit `Add scripts to importwallet RPC `
- currently the scripts are followed with `# addr=` comments just as the other keys are, unsure if this might confuse users into thinking all the scripts are for valid P2SH addresses though, but I don't think that should be an issue.
- there are no birthtimes for scripts, so script imports don't affect rescans
- `importwallet` imports the CScripts but I'm not sure how to approach specifying whether scripts are for P2SH addresses, BIP173 addresses, etc. whether that matters or not. Otherwise the RPC helptext might just need modification.
Fixes#11715
Tree-SHA512: 36c55837b3a58b9d3499d4c0c2ae82153d62aa71919e751574651b63a1d2b8ecc83796db4553cc65dad9b5341c3a42ae2fcf4d62598c30af267f8e1461ba8272
c99a3c32c8 [tests] util_tests.cpp: actually check ignored args (Anthony Towns)
Pull request description:
An array with 7 elements was setup for checking argument parsing, but
was passed to ParseParamaeters with argc=5, meaning the interpretation
of the last two arguments was never actually checked.
Tree-SHA512: 7b81fde49742e524f1bb67e2ec084f5909ae36125f237f0210df4587c62e5a5a8f277f13543f0a85ad145c4bb80d62339a7d50d7ed41659df318c8198ea7f428
e4d0af4 Loop through the bip9 soft fork deployments instead of hard coding (Andrew Chow)
Pull request description:
Instead of hard coding which deployment statistics should be listed in the `getblockchaininfo` output, loop through the available deployments (except testdummy) when displaying their deployment info.
Tree-SHA512: 87e503bcf5e0fd379940d5e53320b9cbb4b47d647c66246d46f47c09a941f135e6ce1e8b75dad441ed4c22c3f41992dfde7717414be1d71c771d4ff8fe0e1936
a6365c5 depends: fix libzmq's needless linking against libstdc++ (Cory Fields)
Pull request description:
Broken gitian builds were introduced with #9254. Big thanks to @jonasschnelli for narrowing down the bisection.
This is broken for a number of reasons, including:
- g++ understands "-static-libstdc++ -lstdc++" to mean "link against whatever libstdc++ exists, probably shared", which in itself is buggy.
- another stdlib (libc++ for example) may be in use
Tree-SHA512: d84968ee680f32ea799034ee516e9477fff2b1ef1b7c9a8ef1941631520ab196ecd50f5d64f3ed1c84113ead44be5e3ddf6ff2ae0277625bdeed05f1da89e017
a720b92 Remove includes in .cpp files for things the corresponding .h file already included (practicalswift)
Pull request description:
Remove includes in .cpp files for things the corresponding .h file already included.
Example case:
* `addrdb.cpp` includes `addrdb.h` and `fs.h`
* `addrdb.h` includes `fs.h`
Then remove the direct inclusion of `fs.h` in `addrman.cpp` and rely on the indirect inclusion of `fs.h` via the included `addrdb.h`.
In line with the header include guideline (see #10575).
Tree-SHA512: 8704b9de3011a4c234db336a39f7d2c139e741cf0f7aef08a5d3e05197e1e18286b863fdab25ae9638af4ff86b3d52e5cab9eed66bfa2476063aa5c79f9b0346
