df389bc Change wallet method disabled error text (Russell Yanofsky)
e526b3d Fix misleading "Method not found" multiwallet errors (Russell Yanofsky)
Pull request description:
Raise RPC_WALLET_NOT_SPECIFIED instead of RPC_METHOD_NOT_FOUND when a required
wallet filename was not specified in an RPC call.
Also raise more specific RPC_WALLET_NOT_FOUND error instead of
RPC_INVALID_PARAMETER in case an invalid wallet was specified, for consistency.
Tree-SHA512: 6a8d885283f69bcfc28f2e08ac03eff02f9f8160a312ce2a90d868aa52533434fc0b4c4ab86547c2f09392338956df915637eaf7136a4fc105e6c8179f2d0ac8
05e023f Move CloseSocket out of SetSocketNonBlocking and pass SOCKET by const reference in SetSocket* functions (Dag Robole)
Pull request description:
Rationale:
Readability, SetSocketNonBlocking does what it says on the tin.
Consistency, More consistent with the rest of the API in this unit.
Reusability, SetSocketNonBlocking can also be used by clients that may not want to close the socket on failure.
This also moves the responsibility of closing the socket back to the caller that opened it, which in general should know better how and when to close it.
Tree-SHA512: 85027137f1b626e2b636549ee38cc757a587adcf464c84be6e65ca16e3b75d7ed1a1b21dd70dbe34c7c5d599af39e53b89932dfe3c74f91a22341ff3af5ea80a
876e92b Testing: listsinceblock should display all transactions that were affected since the given block, including transactions that were removed due to a reorg. (Karl-Johan Alm)
f999c46 listsinceblock: optionally find and list any transactions that were undone due to reorg when requesting a non-main chain block in a new 'removed' array. (Karl-Johan Alm)
Pull request description:
The following scenario will not notify the caller of the fact `tx0` has been dropped:
1. User 1 receives BTC in tx0 from utxo1 in block aa1.
2. User 2 receives BTC in tx1 from utxo1 (same) in block bb1
3. User 1 sees 2 confirmations at block aa3.
4. Reorg into bb chain.
5. User 1 asks `listsinceblock aa3` and does not see that tx0 is now invalidated.
See `listsinceblock.py` commit for related test.
The proposed fix is to iterate from the given block down to the fork point, and to check each transaction in the blocks against the wallet, in addition to including all transactions from the fork point to the active chain tip (the current behavior). Any transactions that were present will now also be listed in the `listsinceblock` output in a new `replaced` array. This operation may be a bit heavy but the circumstances (and perceived frequency of occurrence) warrant it, I believe.
Example output:
```Python
{
'transactions': [],
'replaced': [
{
'walletconflicts': [],
'vout': 1,
'account': '',
'timereceived': 1485234857,
'time': 1485234857,
'amount': '1.00000000',
'bip125-replaceable': 'unknown',
'trusted': False,
'category': 'receive',
'txid': 'ce673859a30dee1d2ebdb3c05f2eea7b1da54baf68f93bb8bfe37c5f09ed22ff',
'address': 'miqEt4kWp9zSizwGGuUWLAmxEcTW9bFUnQ',
'label': '',
'confirmations': -7
}
],
'lastblock': '7a388f27d09e3699102a4ebf81597d974fc4c72093eeaa02adffbbf7527f6715'
}
```
I believe this addresses the comment by @luke-jr in https://github.com/bitcoin/bitcoin/pull/9516#issuecomment-274190081 but I could be wrong..
Tree-SHA512: 607b5dcaeccb9dc0d963d3de138c40490f3e923050b29821e6bd513d26beb587bddc748fbb194503fe618cfe34a6ed65d95e8d9c5764a882b6c5f976520cff35
44eb9d4 [QA] Avoid running multiwallet.py twice (Jonas Schnelli)
Pull request description:
It's already on L92.
Second script execution was introduced in #106043707fcd94e (probably rebase issue)
Reported by @MarcoFalke
Tree-SHA512: cd2873df08e31cbf5b7a43b5e6713b643b758496d4357dcc99d1c3ad2da07e55f6d69996654d17d3f5484219cb5fd4e32da3bfd94701d1137bc955241d285e57
d9d1bd3 nCheckDepth chain height fix (romanornr)
Pull request description:
````
if (nCheckDepth <= 0)
nCheckDepth = 1000000000; // suffices until the year 19000
if (nCheckDepth > chainActive.Height())
nCheckDepth = chainActive.Height();
````
These lines confuse me.
Correct me if I am wrong, but we can't check any more blocks than we have right?
If someone requests <= 0 it get set it into some huge number and then immediately limit it to the chain height in the following statement.
````
if (nCheckDepth > chainActive.Height())
nCheckDepth = chainActive.Height();
````
when using ````--checkblocks=Z```` When Z is ````0```` or any other negative number, it will check all blocks.
I think it should be changed to this maybe.
````
if (nCheckDepth <= 0 || nCheckDepth > chainActive.Height())
nCheckDepth = chainActive.Height();
````
Which gets rid of that huge number which is confusing for any other altcoins that have a different block time.
Tree-SHA512: 8ee0ae5f33b399fa74dc16926709694ccfe1fc8a043cba2f5d00884220ac1b9b13f2df4588041f4133be634e5c7b14f4eebe24294028dafe91581a97dbe627f3
0f402b9 Fix rare edge case of paying too many fees when transaction has no change. (Alex Morcos)
253cd7e Only reserve key for scriptChange once in CreateTransaction (Alex Morcos)
Pull request description:
This is an alternative to #10333
See commit messages.
The first commit is mostly code move, it just moves the change creation code out of the loop.
@instagibbs
Tree-SHA512: f16287ae0f0c6f09cf8b1f0db5880bb567ffa74a50898e3d1ef549ba592c6309ae1a9b251739f63a8bb622d48f03ce2dff9e7a57a6bac4afb4b95b0a86613ea8
Signed-off-by: Pasta <pasta@dashboost.org>
5e3b7b5 Improve error reporting for estimaterawfee (Alex Morcos)
1fafd70 Add function to report highest estimate target tracked per horizon (Alex Morcos)
9c85b91 Change API to estimaterawfee (Alex Morcos)
Tree-SHA512: e624c6e7967e9e48abe49f5818bd674e5710e571cc093029d2f90d39fdfba3c1f30e83bf89f6dce97052b59a7d9636a64642ccfb26effd149c417d0afbed0c0b
2aef1f182 [Qt] migrate old fee slider value to new dropbown Always round up (conservative) (Jonas Schnelli)
bc1be90e3 [Qt] replace fee slider with a Dropdown, extend conf. targets (Jonas Schnelli)
Tree-SHA512: 53796cf0b434dd3db5d4680dbeb6231a7df8f15d88187178fd4db8917cd7fc60091ce2c1589fd93668fc94bb13f989aba5b7ef3792fa95ee1f9f21a15709e2d3
4dc1915 check for null values in rpc args and handle appropriately (Gregory Sanders)
999ef20 importmulti options are optional (Gregory Sanders)
a70d025 fixup some rpc param counting for rpc help (Gregory Sanders)
Pull request description:
Audited where named args will fail to use correct default values or may fail when additional optional arguments are added.
Previously for these parameters, it was fine to omit them as positional arguments, but it would trigger UniValue runtime errors to set them to null, or to omit them while passing named parameters with greater positions (which would internally set earlier missing arguments to null). Now null values are treated the same as missing values so these errors do not occur.
Included a few other small fixes while working on it.
I didn't bother fixing account-based rpc calls.
Tree-SHA512: 8baf781a35bd48de7878d4726850a580dab80323d3416c1c146b4fa9062f8a233c03f37e8ae3f3159e9d04a8f39c326627ca64c14e1cb7ce72538f934ab2ae1e
* Split ProcessPendingInstantSendLocks into two methods
* Split SelectQuorumForSigning into SelectQuorumForSigning and GetActiveQuorumSet
* Implement retrying of IS lock verification when the LLMQ active set rotates
* Remove unused overload of RemoveInstantSendLock
* Move deletion of recovered sigs into own method
* Remove recovered sigs for fully confirmed IS locks
* Also remove rs_t entries when removing recovered sigs from the outside
CleanupOldRecoveredSigs already does this as the last step, but when
RemoveRecoveredSig is called from the outside (e.g. from InstantSend),
these keys are not removed. This PR fixes this by storing the write time
into rs_r and later uses it to remove the rs_t entry.
Old entries will be incompatible with this (1 byte written in the past,
4 bytes written now). This checked by comparing the data size with
sizeof(uint32_t).
* Add TODO
* Split ProcessPendingInstantSendLocks into two methods
* Split SelectQuorumForSigning into SelectQuorumForSigning and GetActiveQuorumSet
* Implement retrying of IS lock verification when the LLMQ active set rotates
* Remove unused overload of RemoveInstantSendLock
* Move deletion of recovered sigs into own method
* Remove recovered sigs for fully confirmed IS locks
* Also remove rs_t entries when removing recovered sigs from the outside
CleanupOldRecoveredSigs already does this as the last step, but when
RemoveRecoveredSig is called from the outside (e.g. from InstantSend),
these keys are not removed. This PR fixes this by storing the write time
into rs_r and later uses it to remove the rs_t entry.
Old entries will be incompatible with this (1 byte written in the past,
4 bytes written now). This checked by comparing the data size with
sizeof(uint32_t).
* Add TODO
* Implement GetInstantSendLockCount in CInstantSendManager
* Add islockCountChanged signal to client model
* Show number of InstantSend locks in debug console
* Implement CompactFull() in CDBWrapper
This allows to compact the whole DB in one go.
* Implement more compact version of CDeterministicMNListDiff
This introduces CDeterministicMNStateDiff which requires to only store
fields on-disk which actually changed.
* Avoid writing mnUniquePropertyMap to disk when storing snapshots
This map can be rebuilt by simply using AddMN for each deserialized MN.
* Implement Serialize/Unserialize in CScript
This allows us to directly use READWRITE() on scripts and removes the need
for the ugly cast to CScriptBase. This commit also changes all Dash specific
uses of CScript to not use the cast.
* Keep track of registeration counts and introduce internalID for masternodes
The "internalId" is simply the number of MNs registered so far when the
new MN is added. It is deterministic and stays the same forever.
* Use internalId as keys in MN list diffs
This reduces the used size on-disk.
* Two simple speedups in MN list diff handling
1. Avoid full compare if dmn or state pointers match in BuildDiff
2. Use std::move when adding diff to listDiff in GetListForBlock
* Implement upgrade code for old CDeterministicMNListDiff format to new format
* Track tipIndex instead of tipHeight/tipBlockHash
* Store and pass around CBlockIndex* instead of block hash and height
This allows us to switch CDeterministicMNManager::GetListForBlock to work
with CBlockIndex.
* Refactor CDeterministicMNManager::GetListForBlock to require CBlockIndex*
Instead of requiring a block hash. This allows us to remove blockHash and
prevBlockHash from CDeterministicMNListDiff without the use of cs_main
locks in GetListForBlock.
* Remove prevBlockHash, blockHash and nHeight from CDeterministicMNListDiff
* Remove access to determinisitcMNManager in CMasternodeMetaMan::ToString()
The deterministic MN manager is not fully initialized yet at the time this
is called, which results in an empty list being returned everytime.
* Better logic to determine if an upgrade is needed
Reuse the "best block" logic to figure out if an upgrade is needed. Also
use it to ensure that older nodes are unable to start after the upgrade
was performed.
* Return null block hash if it was requested with getmnlistdiff
* bump CGovernanceManager::SERIALIZATION_VERSION_STRING
* Check SERIALIZATION_VERSION_STRING before deserializing anything else
* Invoke Clear() before deserializing just to be sure
* Merge #12783: macOS: disable AppNap during sync
1e0f3c44992fb82e6bf36c2ef9277b0759c17c4c macOS: disable AppNap during sync (Alexey Ivanov)
Pull request description:
Code based on pull/5804. Tested only on macOS 10.13.3 and should support 10.9+.
What macOS versions bitcoin core currently supports?
Tree-SHA512: 85809b8d8d8a05169437b4268988da0b7372c29c6da3223ebdc106dc16dcb6d3caa5c52ace3591467005b50a63fd8b2ab1cb071cb4f450032932df25d5063315
* Refactor
* Drop `#include <memory>` from `src/qt/bitcoingui.h`
Was included by mistake.
2a96283 rpc: Update `generate` for developer notes (Wladimir J. van der Laan)
df7e2f0 rpc: Move the `generate` RPC call to rpcwallet (Wladimir J. van der Laan)
Tree-SHA512: ec658d6178f8435dc54b9d9c6dd59f873055a8ae0c3f177c02049d77b93107dd5fc17a1ff56d50f051810d52fdf306846eaba2ef4fc8d2a6cfa831f57a1045c4
055d95f [wallet] return correct error code from resendwallettransaction (John Newbery)
Pull request description:
New code in #10995 uses `RPC_INVALID_REQUEST`. According to the comment in rpc/protocol.h:
```
// RPC_INVALID_REQUEST is internally mapped to HTTP_BAD_REQUEST (400).
// It should not be used for application-layer errors.
```
Change the returned error code to `RPC_WALLET_ERROR`
#11000 will need to be updated to test for the correct error code.
Tree-SHA512: 0201b3a2091adf17ad301825da5bd29f0ea7e284b5394cbef80483fc293a558acc849f74a0780bb8501acab324fc722e41ae049cffec7afb76884e26df4b809e
01699fb Fix resendwallettransactions assert failure if -walletbroadcast=0 (Matt Corallo)
Pull request description:
This fixes#10981 in my preferred way.
Tree-SHA512: 2e43d3ac78d13c5d59db23a82c76c722cc3344767a8237617080e489296d27a98bb1b3bd469b2c9b289b57a9da3709c90448d7a23bcc2e1dfb791c4fd16be015
176c021 [qa] Test non-atomic chainstate writes (Suhas Daftuar)
d6af06d Dont create pcoinsTip until after ReplayBlocks. (Matt Corallo)
eaca1b7 Random db flush crash simulator (Pieter Wuille)
0580ee0 Adapt memory usage estimation for flushing (Pieter Wuille)
013a56a Non-atomic flushing using the blockchain as replay journal (Pieter Wuille)
b3a279c [MOVEONLY] Move LastCommonAncestor to chain (Pieter Wuille)
Tree-SHA512: 47ccc62303f9075c44d2a914be75bd6969ff881a857a2ff1227f05ec7def6f4c71c46680c5a28cb150c814999526797dc05cf2701fde1369c06169f46eccddee
cc5d38f4b Add option to attach a python debugger if test fails (John Newbery)
Pull request description:
Adds a simple option to the test_framework to attach pdb if the test fails.
Helpful for catching and debugging intermittent failures: Run the test in a loop with this option. The first failure will cause execution to pause and nodes will be left running for interactive debugging.
@sdaftuar
Tree-SHA512: 01cfae15fa3f04ed6ec6a99fef60a6c6a59723429309e81eacd6767caf12f5758f59b337804291ecab33a38a2958f36e2b513d201bee72a2eeb207a67046f952
ee2d10a Check if sys/random.h is required for getentropy on OSX. (James Hilliard)
Pull request description:
This should check and include sys/random.h if required for osx as mentioned [here](https://github.com/bitcoin/bitcoin/pull/9821#issuecomment-290936636).
Tree-SHA512: e9491f67f2e8b2e6bcdbcbb8063295e844d5627daf5336e3e17b4a8027d888fa65a08e4580a745abdc35ffd8d86b4fc7434daaac172c4a06ab7566a2ed0bfb92
72f0060 Replace traditional for with ranged for in primitives (Dag Robole)
Pull request description:
Replace traditional for with ranged for in block and transaction primitives to improve readability
Tree-SHA512: c0fff603d2939149ca48b6aa72b59738a3658d49bd58b2d4ffbc85bdb774d8d5bb808fe526fe22bb9eb214de632834d373e2aab44f6019a83c0b09440cea6528
065039d [tests] Fix incorrect memory_cleanse(…) call in crypto_tests.cpp (practicalswift)
Pull request description:
`chKey` and `chIV` are pointers, not arrays :-)
Probably the result of copy-pasting of old code where the code was operating on arrays instead of pointers.
If I'm reading the code correctly the absence/presence of these `memory_cleanse(…)` calls won't alter the outcome of the test in question (`TestPassphraseSingle`) even if fixed. Therefore removing.
Tree-SHA512: a053b2817bedf6ef889744e546ce9a0f165dee94aef6850d9d6a6bb05b0018789597371ecf154a4aec8588c0ef5626ef08c23c35e35927f6b0497b5f086146fe
