This causes re-tries of LLMQ connections, which is required in cases
where 2 MNs tried to connect to each other and due to bad timing then
disconnected each other.
This is especially important when waiting for phase 1 (initialization),
as we might have skipped a whole DKG session before while the async DKG
session handler is still in the init phase (but for the old/skipped LLMQ).
Only sleep 100ms when we previously tried to connect a MN. The back-off
logic in ThreadOpenMasternodeConnections will prevent too many unsuccessful
connects to offline/bad nodes.
97d2b09c12 Add helper to wait for validation interface queue to catch up (Matt Corallo)
36137497f1 Block ActivateBestChain to empty validationinterface queue (Matt Corallo)
5a933cefcc Add an interface to get the queue depth out of CValidationInterface (Matt Corallo)
a99b76f269 Require no cs_main lock for ProcessNewBlock/ActivateBestChain (Matt Corallo)
a734896038 Avoid cs_main in net_processing ActivateBestChain calls (Matt Corallo)
66aa1d58a1 Refactor ProcessGetData in anticipation of avoiding cs_main for ABC (Matt Corallo)
818075adac Create new mutex for orphans, no cs_main in PLV::BlockConnected (Matt Corallo)
Pull request description:
This should fix#11822.
It ended up bigger than I hoped for, but its not too gnarly. Note that "
Require no cs_main lock for ProcessNewBlock/ActivateBestChain" is mostly pure code-movement.
Tree-SHA512: 1127688545926f6099449dca6a4e6609eefc3abbd72f1c66e03d32bd8c7b31e82097d8307822cfd1dec0321703579cfdd82069cab6e17b1024e75eac694122cb
Instead of only doing it the first time. This is a preparation for
the new intra-quorum connection system (which connects all members to all
other members)
faab63111d8f27335aa1f09c1a48da3be45135de shutdown: Stop threads before resetting ptrs (MarcoFalke)
Pull request description:
On shutdown some threads would continue to run after or during a pointer reset. This leads to occasional segfaults on shutdown.
Fix this by resetting the smart pointers after all threads that might read from them have been stopped.
This should fix:
* A segfault in the txindex thread, that occurs when the txindex destructor is done, but the thread was not yet stopped (as this is done in the base index destructor)
* A segfault in the scheduler thread, which dereferences conman. (e.g. CheckForStaleTipAndEvictPeers)
Tree-SHA512: abbcf67fadd088e10fe8c384fadfb90bb115d5317145ccb5363603583b320efc18131e46384f55a9bc574969013dfcbd08c49e0d42c004ed7212eca193858ab2
082a61c Move scheduler/threadGroup into common-init instead of per-app (Matt Corallo)
Pull request description:
This resolves#12229 which pointed out a shutdown deadlock due to
scheduler/checkqueue having been shut down while network message
processing is still running.
Tree-SHA512: 0c0a76113996b164b0610d3b8c40b396f3e384d165bf098768e31fe3701b00763d0d810ef24702387e2e936fefb9fb900a6225f7417bb0175b585f365d542660
The way it was implemented caused vPendingMasternodes entries to be popped
but not necessarily connected to when at the same time quorum connections
were pending.
* Introduce SynchronousUpdatedBlockTip signal
This version of UpdatedBlockTip mirrors the asynchronous behavior that we
had before the introduction of asynchronous signal handling.
* Fix tab spacing in validationinterface.cpp
* Invoke CDeterministicMNManager::UpdatedBlockTip from validation thread
It must be invoked synchronously as otherwise things become inconsistent.
* Call CActiveMasternodeManager::Init with block index
pindexNew in UpdatedBlockTip is not necessarily the current tip, so we
shouldn't rely on it in Init(). This is due to the async nature of the
UpdatedBlockTip invocation.
* Use item data to figure out PS rounds for the input selected in CoinControl dialog
* Access GetRealOutpointPrivateSendRounds through WalletModel in CoinControl dialog
Instead of accessing the walet directly
* Make OverviewPage::privateSendStatus() mockable
GetTimeMillis() -> GetTime()
* Refactor PS related code in overviewpage to access wallet via wallet model
* scripted-diff: Replace #include "" with #include <> (ryanofsky)
-BEGIN VERIFY SCRIPT-
for f in \
src/*.cpp \
src/*.h \
src/bench/*.cpp \
src/bench/*.h \
src/compat/*.cpp \
src/compat/*.h \
src/consensus/*.cpp \
src/consensus/*.h \
src/crypto/*.cpp \
src/crypto/*.h \
src/crypto/ctaes/*.h \
src/policy/*.cpp \
src/policy/*.h \
src/primitives/*.cpp \
src/primitives/*.h \
src/qt/*.cpp \
src/qt/*.h \
src/qt/test/*.cpp \
src/qt/test/*.h \
src/rpc/*.cpp \
src/rpc/*.h \
src/script/*.cpp \
src/script/*.h \
src/support/*.cpp \
src/support/*.h \
src/support/allocators/*.h \
src/test/*.cpp \
src/test/*.h \
src/wallet/*.cpp \
src/wallet/*.h \
src/wallet/test/*.cpp \
src/wallet/test/*.h \
src/zmq/*.cpp \
src/zmq/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
Signed-off-by: Pasta <pasta@dashboost.org>
* scripted-diff: Replace #include "" with #include <> (Dash Specific)
-BEGIN VERIFY SCRIPT-
for f in \
src/bls/*.cpp \
src/bls/*.h \
src/evo/*.cpp \
src/evo/*.h \
src/governance/*.cpp \
src/governance/*.h \
src/llmq/*.cpp \
src/llmq/*.h \
src/masternode/*.cpp \
src/masternode/*.h \
src/privatesend/*.cpp \
src/privatesend/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
Signed-off-by: Pasta <pasta@dashboost.org>
* build: Remove -I for everything but project root
Remove -I from build system for everything but the project root,
and built-in dependencies.
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/Makefile.test.include
* qt: refactor: Use absolute include paths in .ui files
* qt: refactor: Changes to make include paths absolute
This makes all include paths in the GUI absolute.
Many changes are involved as every single source file in
src/qt/ assumes to be able to use relative includes.
Signed-off-by: Pasta <pasta@dashboost.org>
# Conflicts:
# src/qt/dash.cpp
# src/qt/optionsmodel.cpp
# src/qt/test/rpcnestedtests.cpp
* test: refactor: Use absolute include paths for test data files
* Recommend #include<> syntax in developer notes
* refactor: Include obj/build.h instead of build.h
* END BACKPORT #11651 Remove trailing whitespace causing travis failure
* fix backport 11651
Signed-off-by: Pasta <pasta@dashboost.org>
* More of 11651
* fix blockchain.cpp
Signed-off-by: pasta <pasta@dashboost.org>
* Add missing "qt/" in includes
* Add missing "test/" in includes
* Fix trailing whitespaces
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
Co-authored-by: Russell Yanofsky <russ@yanofsky.org>
Co-authored-by: MeshCollider <dobsonsa68@gmail.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
bf64c3cb3 Ignore transactions added to mempool during a reorg for fee estimation purposes. (Alex Morcos)
04f78ab5b Do not reject based on mempool min fee when bypass_limits is set. (Alex Morcos)
fd849e1b0 Change AcceptToMemoryPool function signature (Alex Morcos)
Pull request description:
First commit just removes default arguments from `AcceptToMemoryPool` and consolidates two arguments, it does not change behavior.
Second commit finally fixes the fact that we're not meant to reject based on mempool min fee when adding a transaction from a disconnected block during a reorg as mentioned [here](https://github.com/bitcoin/bitcoin/pull/9602#issue-202197849)
Third commit makes fee estimation ignore transactions added from a disconnected block during a reorg. I think this was another source of fee estimates returning estimates below 1000 sat/kB as in #11303.
Tree-SHA512: 30925ca8b341915bb214f1d2590b36b7931f2e125b7660150e38ae70338f00db5aa7f1608546dddb181446924177eb7cf62ea8bd2583068acc074d6c3f86bc0c
fix 11309
Signed-off-by: Pasta <pasta@dashboost.org>
fix &
Signed-off-by: Pasta <pasta@dashboost.org>
2e9406c Interrupt loading thread after shutdown request (João Barbosa)
Pull request description:
This change (currently) avoids loading the mempool if shutdown is requested.
Tree-SHA512: 3dca3a6ea5b09bd71db0974584d93dfe81819bc0bdbb4d9b6fa0474755306d1403f6c058ecb8211384493a8f7ca3a9134173db744b7344043cfc7d79286c8fd4
a8b5d20 Reset pblocktree before deleting LevelDB file (Sjors Provoost)
Pull request description:
#11043 repaced:
```
delete pblocktree;
pblocktree = new CBlockTreeDB(nBlockTreeDBCache, false, fReset);
```
With:
```
pblocktree.reset(new CBlockTreeDB(nBlockTreeDBCache, false, fReset));
```
This is problematic because `new CBlockTreeDB` tries to delete the existing file, which will fail with `LOCK: already held by process` if it's still open. That's the case for QT.
When QT finds a problem with the index it will ask the user if they want to reindex. At that point it has already opened `blocks/index`. It then runs this [while loop](https://github.com/bitcoin/bitcoin/blob/v0.16.0rc3/src/init.cpp#L1415) again with `fReset = 1`, resulting in the above error.
This change makes that error go away, presumably because `reset()` without an argument closes the file.
Tree-SHA512: fde8b546912f6773ac64da8476673cc270b125aa2d909212391d1a2001b35c8260a8772126b99dfd76b39faaa286feb7c43239185fe584bd4dc2bc04a64044ce
02fc886 Add braces to meet code style on line-after-the-one-changed. (Matt Corallo)
85aa839 Hold mempool.cs for the duration of ATMP. (Matt Corallo)
Pull request description:
This resolves an issue where getrawmempool() can race mempool
notification signals. Intuitively we use mempool.cs as a "read
lock" on the mempool with cs_main being the write lock, so holding
the read lock intermittently while doing write operations is
somewhat strange.
This also avoids the introduction of cs_main in getrawmempool()
which reviewers objected to in the previous fix in #12273
Tree-SHA512: 29464b9ca3890010ae13b7dc1c53487cc2bc9c3cf3d32a14cb09c8aa33848f57959d8991ea096beebcfb72f062e4e1962f104aefe4252c7db87633bbfe4ab317
1e5d14b qt: Clarify some comments (Wladimir J. van der Laan)
f5a4c3d qt: Make sure splash screen is freed on AppInitMain fail (Wladimir J. van der Laan)
Pull request description:
The `splashFinished` event was never sent if AppInitMain fails, causing the splash screen to stick around, causing problems later.
This bug has existed for a while but is now trigging potential crashed because the splash screen subscribes to wallet events.
Meant to fix#12372.
Tree-SHA512: 192a7e3a528015e771d7860dd95fd7b772292fd8064abf2a3cf3a8ea0d375cd43a6e8ed37ca1a38962fe1410c934599e557adf6a8ef9d87ec7f61b6e5fd8db7e
2222bf0 qt: Poll ShutdownTimer after init is done (MarcoFalke)
Pull request description:
The shutdown process has started in `requestShutdown`, but initialize will happily continue with `initializeResult` and start threads late in the shutdown progess. Deleting this running thread will crash the application according to the qt docs:
e5033a5c9b/src/corelib/thread/qthread.cpp (L412-L415)
Potential fix for https://github.com/bitcoin/bitcoin/issues/12372#issuecomment-363642332
This reverts #11831 for now and hopefully restores the previous behaviour.
Tree-SHA512: 8e1706afe90ddf2d972aca12c12d4cb2a9a4f38646c59c5466fe5a1a67361896b93c43917d5ac283841ee2bcc62e6bb8dc2bc81dea9129c899b354e9a4ef241b
dd2de47 Fix fast-shutdown crash if genesis block was not loaded (Matt Corallo)
1c9394a Fix fast-shutdown hang on ThreadImport+GenesisWait (Matt Corallo)
Pull request description:
The second commit is a much simpler alternative fix for the issue fixed in #12349. To test I made ShutdownRequested() always StartShutdown() after a certain number of calls, which turned up one other hang, fixed in the first commit.
Tree-SHA512: 86bde6ac4b8b4e2cb99fff87dafeed02c0d9514acee6d94455637fb2da9ffc274b5ad31b0a6b9f5bd7b700ae35395f28ddb14ffc65ddda3619aa28df28a5607d