Putting the build date in the executable is a practice that has no place
in these days, now that deterministic building is increasingly common.
Continues #7732 which did this for the GUI.
eebc232 test: Add more test vectors for siphash (Wladimir J. van der Laan)
8884830 Use C++11 thread-safe static initializers (Pieter Wuille)
c31b24f Use 64-bit SipHash of netgroups in eviction (Pieter Wuille)
9bf156b Support SipHash with arbitrary byte writes (Pieter Wuille)
053930f Avoid recalculating vchKeyedNetGroup in eviction logic. (Patrick Strateman)
288d85d Get rid of CTxMempool::lookup() entirely (Pieter Wuille)
c2a4724 Optimization: use usec in expiration and reuse nNow (Pieter Wuille)
e9b4780 Optimization: don't check the mempool at all if no mempool req ever (Pieter Wuille)
dbfb426 Optimize the relay map to use shared_ptr's (Pieter Wuille)
8d39d7a Switch CTransaction storage in mempool to std::shared_ptr (Pieter Wuille)
1b9e6d3 Add support for unique_ptr and shared_ptr to memusage (Pieter Wuille)
6182d10 Do not increment nAttempts by more than one for every Good connection. (Gregory Maxwell)
c769c4a Avoid counting failed connect attempts when probably offline. (Gregory Maxwell)
3d3602f Add RPC test for the p2p mempool command in conjunction with disabled bloomfilters (Jonas Schnelli)
beceac9 Disable the mempool P2P command when bloom filters disabled (Peter Todd)
Add error and range-checking parsers for unsigned 32 and 64 bit numbers.
The 32-bit variant is required for parsing sequence numbers from the
command line in `bitcoin-tx` (see #8164 for discussion). I've thrown in
the 64-bit variant as a bonus, as I'm sure it will be needed at some
point.
Also adds tests, and updates `developer-notes.md`.
ae357d5 [Bitcoin-Tx] Add tests for sequence number support (Jonas Schnelli)
e59336f [bitcoin-tx] allow to set nSequence number over the in= command (Jonas Schnelli)
a946bb6 [RPC] createrawtransaction: add option to set the sequence number per input (Jonas Schnelli)
Also introduce UniValueType
UniValueType is a wrapper for UniValue::VType which allows setting
a typeAny flag. This flag indicates the type does not matter.
(Used by RPCTypeCheckObj)
We send a newly-accepted peer a 1000-entry addr message, and then only use
vAddrToSend for small messages. Deallocate vAddrToSend after it's been used for
the big message to save about 40 kB per connected inbound peer.
- BIP9DeploymentInfo struct for static deployment info
- VersionBitsDeploymentInfo: Avoid C++11ism by commenting parameter names
- getblocktemplate: Make sure to set deployments in the version if it is LOCKED_IN
- In this commit, all rules are considered required for clients to support
Change authentication order to make it more clear (see #7700).
- If the `-torpassword` option is provided, force use of
`HASHEDPASSWORD` auth.
- Give error message if `-torpassword` provided, but
`HASHEDPASSWORD` auth is not available.
- Give error message if only `HASHEDPASSWORD` available, but
`-torpassword` not given.
* Switch mapRelay to use shared_ptr<CTransaction>
* Switch the relay code to copy mempool shared_ptr's, rather than copying
the transaction itself.
* Change vRelayExpiration to store mapRelay iterators rather than hashes
(smaller and faster).
Optimistically test the latch bool before taking the lock.
For all IsInitialBlockDownload calls after the first to return false,
this avoids the need to lock cs_main.
This was caused by an pyc files hanging around from previous
python2 invocations, when the matching .py missing from that path.
This should not be a problem with python3's tagged caches.
Saves about 10% of application memory usage once the mempool warms up. Since the
mempool is DynamicUsage-regulated, this will translate to a larger mempool in
the same amount of space.
Map value type: eliminate the vin index; no users of the map need to know which
input of the transaction is spending the prevout.
Map key type: replace the COutPoint with a pointer to a COutPoint. A COutPoint
is 36 bytes, but each COutPoint is accessible from the same map entry's value.
A trivial DereferencingComparator functor allows indirect map keys, but the
resulting syntax is misleading: `map.find(&outpoint)`. Implement an indirectmap
that acts as a wrapper to a map that uses a DereferencingComparator, supporting
a syntax that accurately reflect the container's semantics: inserts and
iterators use pointers since they store pointers and need them to remain
constant and dereferenceable, but lookup functions take const references.
269a440 Add test for dbwrapper iterators with same-prefix keys. (Matt Corallo)
6030625 test: Add more thorough test for dbwrapper iterators (Wladimir J. van der Laan)
84c13e7 chain: Add assertion in case of missing records in index db (Wladimir J. van der Laan)
Before this, if someone imported a scriptPubKey directly (in hex form) using
importaddress, outputs sending to it would be treated as change, as the
corresponding CTxDestination was not added to the address book.
Fix this by trying to detect scriptPubKeys that are in fact convertible to a
CTxDestination and add them anyway. Add a warning to the RPC help to warn
against importing raw non-standard scripts.
- clear the __pycache__ during 'make clean'
- Copy the qrc locale file to a temp location and remove it when finished
(rcc expects everything to be in the same path)
This reduces the rate of not founds by better matching the far
end expectations, it also improves privacy by removing the
ability to use getdata to probe for a node having a txn before
it has been relayed.
Previously the benchmark code used an integer division (%) with
a non-constant in the inner-loop. This is quite slow on many
processors, especially ones like ARM that lack a hardware divide.
Even on fairly recent x86_64 like haswell an integer division can
take something like 100 cycles-- making it comparable to the
runtime of siphash.
This change avoids the division by using bitmasking instead. This
was especially easy since the count was only increased by doubling.
This change also restarts the timing when the execution time was
very low this avoids mintimes of zero in cases where one execution
ends up below the timer resolution. It also reduces the impact of
the overhead on the final result.
The formatting of the prints is changed to not use scientific
notation make it more machine readable (in particular, gnuplot
croaks on the non-fixedpoint, and it doesn't sort correctly).
This also hoists out all the floating point divisions out of the
semi-hot path because it was easy to do so.
It might be prudent to break out the critical test into a macro
just to guarantee that it gets inlined. It might also make sense
to just save out the intermediate counts and times and get the
floating point completely out of the timing loop (because e.g.
on hardware without a fast hardware FPU like some ARM it will
still be slow enough to distort the results). I haven't done
either of these in this commit.
Fixing formatting
Adding test case into automatically generated test case set
Clean up commits
removing extra whitespace from eol
Removing extra whitespace on macro line
If a node is offline failed outbound connection attempts will crank up
the addrman counter and effectively blow away our state.
This change reduces the problem by only counting attempts made while
the node believes it has outbound connections to at least two
netgroups.
Connect and addnode connections are also not counted, as there is no
reason to unequally penalize them for their more frequent
connections -- though there should be no real effect from this
unless their addnode configureation is later removed.
Wasteful repeated connection attempts while only a few connections are
up are avoided via nLastTry.
This is still somewhat incomplete protection because our outbound
peers could be down but not timed out or might all be on 'local'
networks (although the requirement for multiple netgroups helps).
The ability to GETDATA a transaction which has not (yet) been relayed
is a privacy loss vector.
The use of the mempool for this was added as part of the mempool p2p
message and is only needed to fetch transactions returned by it.
2a8b358 Fix typo adddrman to addrman as requested in #8070 (Ethan Heilman)
f4119c6 Remove non-determinism which is breaking net_tests #8069 (EthanHeilman)
bf9266e Use Socks5ErrorString() to decode error responses from socks proxy. (Warren Togami)
94fd1d8 Make Socks5() InterruptibleRecv() timeout/failures informative. (Warren Togami)
0d9af79 SOCKS5 connecting and connected messages with -debug=net. (Warren Togami)
00678bd Make failures to connect via Socks5() more informative and less unnecessarily scary. (Warren Togami)
b4d24e1 Report reindexing progress in GUI (Pieter Wuille)
d3d7547 Add -reindex-chainstate that does not rebuild block index (Pieter Wuille)
fb8fad1 Optimize ActivateBestChain for long chains (Pieter Wuille)
316623f Switch reindexing to AcceptBlock in-loop and ActivateBestChain afterwards (Pieter Wuille)
d253ec4 Make ProcessNewBlock dbp const and update comment (Pieter Wuille)
5d5e7a0 net: No need to export ConnectNode (Cory Fields)
e9ed620 net: No need to export DumpBanlist (Cory Fields)
8b8f877 net: make Ban/Unban/ClearBan functionality consistent (Cory Fields)
cca221f net: Drop CNodeRef for AttemptToEvictConnection (Cory Fields)
563f375 net: use the exposed GetNodeSignals() rather than g_signals directly (Cory Fields)
9faa490 net: remove unused set (Cory Fields)
52cbce2 net: don't import std namespace (Cory Fields)
a68ec21 Use SipHash-2-4 for address relay selection (Pieter Wuille)
8cc9cfe Switch CTxMempool::mapTx to use a hash index for txids (Pieter Wuille)
382c871 Use SipHash-2-4 for CCoinsCache index (Pieter Wuille)
0b1295b Add SipHash-2-4 primitives to hash (Pieter Wuille)
1475ecf Fix de-serialization bug where AddrMan is corrupted after exception * CAddrDB modified so that when de-serialization code throws an exception Addrman is reset to a clean state * CAddrDB modified to make unit tests possible * Regression test created to ensure bug is fixed * StartNode modifed to clear adrman if CAddrDB::Read returns an error code. (EthanHeilman)
fa83a5d [qa] wallet: Temporarily disable salvagewallet test (MarcoFalke)
fadd048 [doc] Link to clang-format in the developer notes (MarcoFalke)
fa72f7d [doc] Remove outdated line from listunspent RPC help, fix typo (MarcoFalke)
ac40ed7 Increase timeout waiting for pruned blk00000.dat (error10)
The current logic for syncing headers may lead to lots of duplicate
getheaders requests being sent: If a new block arrives while the node
is in headers sync, it will send getheaders in response to the block
announcement. When the headers arrive, the message will be of maximum
size and so a follow-up request will be sent---all of that in addition
to the existing headers syncing. This will create a second "chain" of
getheaders requests. If more blocks arrive, this may even lead to
arbitrarily many parallel chains of redundant requests.
This patch changes the behaviour to only request more headers after a
maximum-sized message when it contained at least one unknown header.
This avoids sustaining parallel chains of redundant requests.
Note that this patch avoids the issues raised in the discussion of
https://github.com/bitcoin/bitcoin/pull/6821: There is no risk of the
node being permanently blocked. At the latest when a new block arrives
this will trigger a new getheaders request and restart syncing.
Verify that results correct (match known values), consistent (encrypt->decrypt
matches the original), and compatible with the previous openssl implementation.
Also check that failed encrypts/decrypts fail the exact same way as openssl.
Wallet must come before crypto, otherwise linking fails on some platforms.
Includes a tangentially-related general cleanup rather than making the Makefile
sloppier.
The output should always match openssl's, even for failed operations. Even for
a decrypt with broken padding, the output is always deterministic (and attemtps
to be constant-time).
My changes leave all tray icon and menu creation/initialization logic
untouched. It only shows or hides the icon according to the setting.
A new checkbox was added to the OptionsDialog under the Window tab. A
bool option named "hideTrayIcon" was added to OptionsModel. This
checkbox was mapped like other all options to the OptionsModel.
A signal was added to the OptionsModel for broadcasting changes the the
hideTrayIcon option. This signal was connected to a new slot added to
BitcoinGUI named setTrayIconVisible(bool). The slot simply hides or
shows the trayIcon in BitcoinGUI according to the parameter recieved.
Changing NOP3 op name to OP_CHECKSEQUENCEVERIFY, renaming instances of OP_NOP3 in script_tests.json to CHECKSEQUENCEVERIFY
Cleaning up NOP3 comment
Re-adding test cases that were accidentally deleted, removing dupicated test case, fixing formatting
Removing re-labeling of OP_NOP3 to OP_CSV
Fixing whitespace issues
- Ban/Unban/ClearBan call uiInterface.BannedListChanged() as necessary
- Ban/Unban/ClearBan sync to disk if the operation is user-invoked
- Mark node for disconnection automatically when banning
- Lock cs_vNodes while setting disconnected
- Don't spin in a tight loop while setting disconnected
Move the version reporting to Wallet::Verify, before starting
verification of the wallet.
This removes the dependency of init on a specific wallet database
library.
A further, trivial step towards resolving #7965.
166e4b0 Notify other serviceQueue thread we are finished to prevent deadlocks. (Pavel Janík)
db18ab2 Reenable multithread scheduler test. (Pavel Janík)
I made a subclass of QMessageBox that disables the send button in
exec() and starts a timer that calls a slot to re-enable it after a
configurable delay.
It also has a countdown in the send/yes button while it is disabled
to hint to the user why the send button is disabled (and that it is
actually supposed to be disabled).
* The "ERROR" was printed far too often during normal operation for what was not an error.
* Makes the Socks5() connect failure similar to the IP connect failure in debug.log.
Before:
`2016-05-09 00:15:00 ERROR: Proxy error: host unreachable`
After:
`2016-05-09 00:15:00 Socks5() connect to t6xj6wilh4ytvcs7.onion:18333 failed: host unreachable"`
Locking for each operation here is unnecessary, and solves the wrong problem.
Additionally, it introduces a problem when cs_vNodes is held in an owning
class, to which invididual CNodeRefs won't have access.
These should be weak pointers anyway, once vNodes contain shared pointers.
Rather than using a refcounting class, use a 3-step process instead.
1. Lock vNodes long enough to snapshot the fields necessary for comparing
2. Unlock and do the comparison
3. Re-lock and mark the resulting node for disconnection if it still exists
