fabd71076cd9493bd2d30a198467f5ea621b27aa ci: Print free disk space (MarcoFalke)
fad9fdbea5dfb19328282afda9588edc6f1d0ddf test: Properly deserialize integers in little-endian (MarcoFalke)
fa94fc10c881e502e6c9a71f3b7719aa955900f9 ci: Run functional tests on s390x (MarcoFalke)
Pull request description:
Top commit has no ACKs.
Tree-SHA512: 98ba77eb56f283131fdaeb393fda86cc308f1bf9781e1e0e5736b8d616528dc8ff2e494d55ba107c138083025c66a59e382fcfa9962d4349a5fd6cbbc52484c3
4671fc3d9e669da8b8781f0cbefee43cb9acd527 Expand on wallet_balance.py comment from https://github.com/bitcoin/bitcoin/pull/16766\#issuecomment-527563982 (Jeremy Rubin)
91f3073f08aff395dd813296bf99fd8ccc81bb27 Update release notes to mention changes to IsTrusted and impact on wallet (Jeremy Rubin)
8f174ef112199aa4e98d756039855cc561687c2e Systematize style of IsTrusted single line if (Jeremy Rubin)
b49dcbedf79613f0e0f61bfd742ed265213ed280 update variable naming conventions for IsTrusted (Jeremy Rubin)
5ffe0d144923f365cb1c2fad181eca15d1668692 Update comment in test/functional/wallet_balance.py (Jeremy Rubin)
a550c58267f50c59c2eea1d46edaa5019a8ad5d8 Update wallet_balance.py test to reflect new behavior (Jeremy Rubin)
5dd7da4ccd1354f09e2d00bab29288db0d5665d0 Reuse trustedParents in looped calls to IsTrusted (Jeremy Rubin)
595f09d6de7f1b94428cdd1310777aa6a4c584e5 Cache tx Trust per-call to avoid DoS (Jeremy Rubin)
dce032ce294fe0d531770f540b1de00dc1d13f4b Make IsTrusted scan parents recursively (Jeremy Rubin)
Pull request description:
This slightly modifies the behavior of IsTrusted to recursively check the parents of a transaction. Otherwise, it's possible that a parent is not IsTrusted but a child is. If a parent is not trusted, then a child should not be either.
This recursive scan can be a little expensive, so ~it might be beneficial to have a way of caching IsTrusted state, but this is a little complex because various conditions can change between calls to IsTrusted (e.g., re-org).~ I added a cache which works per call/across calls, but does not store the results semi-permanently. Which reduces DoS risk of this change. There is no risk of untrusted parents causing a resource exploitation, as we immediately return once that is detected.
This is a change that came up as a bug-fix esque change while working on OP_SECURETHEBAG. You can see the branch where this change is important here: https://github.com/bitcoin/bitcoin/compare/master...JeremyRubin:stb-with-rpc?expand=1. Essentially, without this change, we can be tricked into accepting an OP_SECURETHEBAG output because we don't properly check the parents. As this was a change which, on its own, was not dependent on OP_SECURETHEBAG, I broke it out as I felt the change stands on its own by fixing a long standing wallet bug.
The test wallet_balance.py has been corrected to meet the new behavior. The below comment, reproduced, explains what the issue is and the edge cases that can arise before this change.
# Before `test_balance()`, we have had two nodes with a balance of 50
# each and then we:
#
# 1) Sent 40 from node A to node B with fee 0.01
# 2) Sent 60 from node B to node A with fee 0.01
#
# Then we check the balances:
#
# 1) As is
# 2) With transaction 2 from above with 2x the fee
#
# Prior to #16766, in this situation, the node would immediately report
# a balance of 30 on node B as unconfirmed and trusted.
#
# After #16766, we show that balance as unconfirmed.
#
# The balance is indeed "trusted" and "confirmed" insofar as removing
# the mempool transactions would return at least that much money. But
# the algorithm after #16766 marks it as unconfirmed because the 'taint'
# tracking of transaction trust for summing balances doesn't consider
# which inputs belong to a user. In this case, the change output in
# question could be "destroyed" by replace the 1st transaction above.
#
# The post #16766 behavior is correct; we shouldn't be treating those
# funds as confirmed. If you want to rely on that specific UTXO existing
# which has given you that balance, you cannot, as a third party
# spending the other input would destroy that unconfirmed.
#
# For example, if the test transactions were:
#
# 1) Sent 40 from node A to node B with fee 0.01
# 2) Sent 10 from node B to node A with fee 0.01
#
# Then our node would report a confirmed balance of 40 + 50 - 10 = 80
# BTC, which is more than would be available if transaction 1 were
# replaced.
The release notes have been updated to note the new behavior.
ACKs for top commit:
ariard:
Code Review ACK 4671fc3, maybe extend DoS protection in a follow-up PR.
fjahr:
Code review ACK 4671fc3d9e669da8b8781f0cbefee43cb9acd527
ryanofsky:
Code review ACK 4671fc3d9e669da8b8781f0cbefee43cb9acd527. Changes since last review: 2 new commits adding suggested release note and python test comment, also a clean rebase with no changes to the earlier commits. The PR description is more comprehensive now, too. Looks good!
promag:
Code review ACK 4671fc3d9e669da8b8781f0cbefee43cb9acd527.
Tree-SHA512: 6b183ff425304fef49724290053514cb2770f4a2350dcb83660ef24af5c54f7c4c2c345b0f62bba60eb2d2f70625ee61a7fab76a7f491bb5a84be5c4cc86b92f
bd52684508ca2964e6a3af503d21ff99675380c7 test: rest /tx with an invalid/unknown txid (brunoerg)
Pull request description:
This PR adds test coverage to the endpoint `/tx` (rest) passing an invalid and an unknown txid to test its return.
Invalid -> should return status code 400 (bad request)
Unknown -> should return status code 404 (not found)
ACKs for top commit:
kallewoof:
ACK bd52684508ca2964e6a3af503d21ff99675380c7
Tree-SHA512: a7fbb63f30d06fc0855133a36e8317c7930ba13aa2b4a2dd1fc35079d59eacace72e1ffe7ae1b3e067066fe51792415940d72d923e83a659a0d5965e4110b32a
0754e9c01bd3d57aa241e313ba34c18c4897ba98 test: run feature_pruning.py without wallet compiled (Sebastian Falbesoner)
Pull request description:
Only one small part of the pruning test (sub-test `wallet_test`) is wallet-related, hence we can run all other parts without wallet compiled.
ACKs for top commit:
MarcoFalke:
cr ACK 0754e9c01bd3d57aa241e313ba34c18c4897ba98
Tree-SHA512: 856856903d21d64953ed0102cc2a96f55975c4b7d8e93e57b82c266024967160df64df2b6068be089efc05e883e8d6d12e7327053420d4c640b9d8cc5bcb1c58
3004d5a12d09d94bfc4dee2a8e8f2291996a4aaf [validation] Remove fMissingInputs from AcceptToMemoryPool() (John Newbery)
c428622a5bb1e37b2e6ab2c52791ac05d9271238 [validation] Remove unused first_invalid parameter from ProcessNewBlockHeaders() (John Newbery)
7204c6434b944f6ad51b3c895837729d3aa56eea [validation] Remove useless ret parameter from Invalid() (John Newbery)
1a37de4b3174d19a6d8691ae07e92b32fdfaef11 [validation] Remove error() calls from Invalid() calls (John Newbery)
067981e49246822421a7bcc720491427e1dba8a3 [validation] Tidy Up ValidationResult class (John Newbery)
a27a2957ed9afbe5a96caa5f0f4cbec730d27460 [validation] Add CValidationState subclasses (John Newbery)
Pull request description:
Carries out some remaining tidy-ups remaining after PR 15141:
- split ValidationState into TxValidationState and BlockValidationState (commit from ajtowns)
- various minor code style tidy-ups to the ValidationState class
- remove the useless `ret` parameter from `ValidationState::Invalid()`
- remove the now unused `first_invalid` parameter from `ProcessNewBlockHeaders()`
- remove the `fMissingInputs` parameter from `AcceptToMemoryPool()`, and deal with missing inputs the same way as other errors by using the `TxValidationState` object.
Tip for reviewers (thanks ryanofsky!): The first commit ("[validation] Add CValidationState subclasses" ) is huge and can be easier to start reviewing if you revert the rote, mechanical changes:
Substitute the commit hash of commit "[validation] Add CValidationState subclasses" for <CommitHash> in the commands below.
```sh
git checkout <CommitHash>
git grep -l ValidationState | xargs sed -i 's/BlockValidationState\|TxValidationState/CValidationState/g'
git grep -l ValidationResult | xargs sed -i 's/BlockValidationResult\|TxValidationResult/ValidationInvalidReason/g'
git grep -l MaybePunish | xargs sed -i 's/MaybePunishNode\(ForBlock\|ForTx\)/MaybePunishNode/g'
git diff HEAD^
```
After that it's possible to easily see the mechanical changes with:
```sh
git log -p -n1 -U0 --word-diff-regex=. <CommitHash>
```
ACKs for top commit:
laanwj:
ACK 3004d5a12d09d94bfc4dee2a8e8f2291996a4aaf
amitiuttarwar:
code review ACK 3004d5a12d09d94bfc4dee2a8e8f2291996a4aaf. Also built & ran tests locally.
fjahr:
Code review ACK 3004d5a12d09d94bfc4dee2a8e8f2291996a4aaf . Only nit style change and pure virtual destructor added since my last review.
ryanofsky:
Code review ACK 3004d5a12d09d94bfc4dee2a8e8f2291996a4aaf. Just whitespace change and pure virtual destructor added since last review.
Tree-SHA512: 511de1fb380a18bec1944ea82b513b6192df632ee08bb16344a2df3c40811a88f3872f04df24bc93a41643c96c48f376a04551840fd804a961490d6c702c3d36
9075d13153ce06cd59a45644831ecc43126e1e82 [docs] Add release notes for removal of REJECT reasons (John Newbery)
04a2f326ec0f06fb4fce1c4f93500752f05dede8 [validation] Fix REJECT message comments (John Newbery)
e9d5a59e34ff2d538d8f5315efd9908bf24d0fdc [validation] Remove REJECT code from CValidationState (John Newbery)
0053e16714323c1694c834fdca74f064a1a33529 [logging] Don't log REJECT code when transaction is rejected (John Newbery)
a1a07cfe99fc8cee30ba5976dc36b47b1f6532ab [validation] Fix peer punishment for bad blocks (John Newbery)
Pull request description:
We no longer send BIP 61 REJECT messages, so there's no need to set
a REJECT code in the CValidationState object.
Note that there is a minor bug fix in p2p behaviour here. Because the
call to `MaybePunishNode()` in `PeerLogicValidation::BlockChecked()` only
previously happened if the REJECT code was > 0 and < `REJECT_INTERNAL`,
then there are cases were `MaybePunishNode()` can get called where it
wasn't previously:
- when `AcceptBlockHeader()` fails with `CACHED_INVALID`.
- when `AcceptBlockHeader()` fails with `BLOCK_MISSING_PREV`.
Note that `BlockChecked()` cannot fail with an 'internal' reject code. The
only internal reject code was `REJECT_HIGHFEE`, which was only set in
ATMP.
This reverts a minor bug introduced in 5d08c9c579.
ACKs for top commit:
ariard:
ACK 9075d13, changes since last reviewed are splitting them in separate commits to ease understanding and fix nits
fjahr:
ACK 9075d13153ce06cd59a45644831ecc43126e1e82, confirmed diff to last review was fixing nits in docs/comments.
ryanofsky:
Code review ACK 9075d13153ce06cd59a45644831ecc43126e1e82. Only changes since last review are splitting the main commit and updating comments
Tree-SHA512: 58e8a1a4d4e6f156da5d29fb6ad6a62fc9c594bbfc6432b3252e962d0e9e10149bf3035185dc5320c46c09f3e49662bc2973ec759679c0f3412232087cb8a3a7
ea4cc3a7b36a9c77dbf0aff439da3ef0ea58e6e4 Truly decouple wallet from chainparams for -fallbackfee (Jorge Timón)
Pull request description:
Before it was 0 by default for main and 20000 for test and regtest.
Now it is 0 by default for all chains, thus there's no need to call Params().
Also now the default for main is properly documented.
Suggestion for release notes:
-fallbackfee was 0 (disabled) by default for the main chain, but 20000 by default for the test chains. Now it is 0 by default for all chains. Testnet and regtest users will have to add fallbackfee=20000 to their configuration if they weren't setting it and they want it to keep working like before.
Should I propose them to the wiki for the release notes or only after merge?
For more context, see https://github.com/bitcoin/bitcoin/pull/16402#issuecomment-515701042
ACKs for top commit:
MarcoFalke:
ACK ea4cc3a7b36a9c77dbf0aff439da3ef0ea58e6e4
Tree-SHA512: fdfaba5d813da4221e405e0988bef44f3856d10f897a94f9614386d14b7716f4326ab8a6646e26d41ef3f4fa61b936191e216b1b605e9ab0520b0657fc162e6c
----
Co-Authored-By: UdjinM6 <UdjinM6@users.noreply.github.com>
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] ~~I have commented my code, particularly in hard-to-understand
areas~~ N/A
- [ ] ~~I have added or updated relevant unit/integration/functional/e2e
tests~~ N/A
- [ ] ~~I have made corresponding changes to the documentation~~ N/A
- [ ] I have assigned this pull request to a milestone _(for repository
code-owners and collaborators only)_
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
8dd5946c0b7aa8f3976b14a5de4ce84b80a9c32a add functional test (Larry Ruane)
b5a80fa7e487c37b7ac0e3874a2fabade41b9ca8 util: Handle HTTP_SERVICE_UNAVAILABLE in bitcoin-cli (Hennadii Stepanov)
Pull request description:
If `bitcoind` is processing 16 RPC requests, attempting to submit another request using `bitcoin-cli` produces this less-than-helpful error message: `error: couldn't parse reply from server`. This PR changes the error to: `error: server response: Work queue depth exceeded`.
ACKs for top commit:
fjahr:
tACK 8dd5946c0b7aa8f3976b14a5de4ce84b80a9c32a
luke-jr:
utACK 8dd5946c0b7aa8f3976b14a5de4ce84b80a9c32a (no changes since previous utACK)
hebasto:
re-ACK 8dd5946c0b7aa8f3976b14a5de4ce84b80a9c32a, only suggested changes since my [previous](https://github.com/bitcoin/bitcoin/pull/18335#pullrequestreview-460621350) review.
darosior:
ACK 8dd5946c0b7aa8f3976b14a5de4ce84b80a9c32a
Tree-SHA512: 33e25f6ff05d9b56fae2bdb68b132557bb8e995f5438ac4fbbc53c304c5152a98aa43c43600c31d8a6a2830cbd48bf8ec7d89dce50190b29ec00a43830126913
## Issue being fixed or feature implemented
the problem with retries implemented in #4793 is that they don't really
do anything besides fetching results of a failed job multiple times 🙈
## What was done?
partially reverted changes done in #4793, implemented actual job
restart. dropped `--sleep` and `--retries` and added `--attempts`
instead.
## How Has This Been Tested?
Pick any test, add some randomly failing expression somewhere and run it
with some high number of retries.
For example:
```diff
diff --git a/test/functional/feature_dip0020_activation.py b/test/functional/feature_dip0020_activation.py
index 471e4fdc66..b56a954b78 100755
--- a/test/functional/feature_dip0020_activation.py
+++ b/test/functional/feature_dip0020_activation.py
@@ -69,6 +69,7 @@ class DIP0020ActivationTest(BitcoinTestFramework):
# Should be spendable now
tx0id = self.node.sendrawtransaction(tx0_hex)
assert tx0id in set(self.node.getrawmempool())
+ assert int(tx0id[0], 16) < 4
if __name__ == '__main__':
```
On develop:
```
./test/functional/test_runner.py feature_dip0020_activation.py --retries=100 --sleep=0
```
if this fails on the first run, it keeps "failing" (simply fetching the
same results actually) till the end.
With this patch:
```
./test/functional/test_runner.py feature_dip0020_activation.py --attempts=100
```
if this fails on the first run, it can actually succeed after a few
attempts now, unless you are extremely unlucky ofc 😄
Also, check [ci results in my repo
](https://cdn.artifacts.gitlab-static.net/93/b4/93b4f8b17e5dcccab1afee165b4d74d90f05800caf65d6c48a83a1a78c979587/2023_04_08/4081291268/4478867166/job.log?response-content-type=text%2Fplain%3B%20charset%3Dutf-8&response-content-disposition=inline&Expires=1680945516&KeyName=gprd-artifacts-cdn&Signature=2d4mHCJBbgRaTDiSQ6kKIy1PdIM=).
Note:
```
...
feature_dip3_v19.py failed at attempt 1/3, Duration: 159s
...
4/179 - [1mfeature_dip3_v19.py[0m passed, Duration: 244 s
...
feature_llmq_hpmn.py failed at attempt 1/3, Duration: 284s
...
feature_llmq_hpmn.py failed at attempt 2/3, Duration: 296s
...
11/179 - [1mfeature_llmq_hpmn.py[0m failed, Duration: 233 s
...
```
An example with 2 tests failing initially and then passing:
https://gitlab.com/dashpay/dash/-/jobs/4089689970
## Breaking Changes
n/a
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
## Issue being fixed or feature implemented
This was reported/requested by @HashEngineering:
> Older versions of our App won't sync due to if (obj.nVersion ==
BASIC_BLS_VERSION) . Older versions don't know what version a SML Entry
is. As such, they will never read the type field. On the android client
this causes an offset problem when reading the mnlistdiff and it will
throw an exception that bans the peer that supplied it. Soon enough, no
peers will be left to connect to because they will all give the android
client bad data.
## What was done?
With this PR, SML will serialise the new v19 fields (`nType`,
`platformHTTPPort`, `platformNodeID`) if the client's version is at
least equal to `70227`.
Note: Serialisation for hashing skips the above rule.
Also, functional test mininode protocol version is set to `70227`.
## How Has This Been Tested?
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
## Issue being fixed or feature implemented
During reviewing TODO were found some TODOes that can be done now.
## What was done?
- fix: follow-up dash#3467 - replaced commented code to disabled code
- follow-up bitcoin#16394 - uncommented code related to `watchonly`
feature
- removed out-dated TODO in `rpc/masternode.cpp` (already done)
- fix: renamed name of clean up test_unittests: removed TODO and updated
name of variable TRAVIS
- rewritten todo inside `.travis.yml`
- fix: adds a missing description for result of rpc `mnsync`
Last commit (`mnsync`) is an only candidate for backport to v19, other
changes are non significant.
## How Has This Been Tested?
Run functional/unit tests
## Breaking Changes
No breaking changes
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [ ] I have made corresponding changes to the documentation
- [x] I have assigned this pull request to a milestone
## Issue being fixed or feature implemented
should hopefully fix some sporadic ci test failures (like
https://gitlab.com/dashpay/dash/-/jobs/4052206622#L1962)
## What was done?
tweaked dynamically_add/update functions to make checks more consistent
and avoid some edge cases, pls see individual commits
## How Has This Been Tested?
`feature_llmq_hpmn.py` and `feature_dip3_v19.py` still work locally,
let's see if ci is now (constantly) happy about these too...
## Breaking Changes
n/a
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
fa6af312277bb1b7e57d9b764d411c5b0873829f test: Document why syncwithvalidationinterfacequeue is needed in tests (MarcoFalke)
fa135a13b8ddaa117bd090ec43a3eab3a95755c1 Revert "test: Add missing sync_all to wallet_balance test" (MarcoFalke)
Pull request description:
syncwithvalidationinterfacequeue is a hidden test-only RPC, so it should not be used when it is not needed. Thus, either remove it or explain why it is needed.
ACKs for top commit:
fjahr:
Code review ACK fa6af312277bb1b7e57d9b764d411c5b0873829f
Tree-SHA512: de30db4ab521184091ee5beeab02989138cf7cf05088f766a2fb106151b239310b63d5380cb79e2a072f72c5ae9513aecae8eb9c1c7be713771585c3cb04d63a
3ebde2143aa98af213872b98b474d904e55056f7 [test] Fix wait condition in disconnect_p2ps (Amiti Uttarwar)
Pull request description:
#19315 currently has a [test failure](https://cirrus-ci.com/task/4545582645641216) because of a race. `disconnect_p2ps` is intended to have a `wait_until` clause that prevents this race, but the conditional doesn't match since its comparing two different object types. `MY_SUBVERSION` is defined in messages.py as a byte string, but is compared to the value returned by the RPC. This PR simply converts types to ensure they match, which should prevent the race from occurring.
HUGE PROPS TO jnewbery for discovering the issue 🔎
ACKs for top commit:
jnewbery:
ACK 3ebde2143aa98af213872b98b474d904e55056f7
glozow:
Code review ACK 3ebde2143a
Tree-SHA512: ca096b80a3e4d757a645f38846d6dc89d6a3d35c3435513a72d278e305faddd4aff9e75a767941b51b2abbf59c82679bac1e9a0140d6f285efe3053e51bcc2a8
638441928a446726ce3a7fb20433a5478e7585bb test: add parameterized constructor for msg_sendcmpct() (Sebastian Falbesoner)
Pull request description:
While working on the test for #19776 I noticed that creating a `sendcmpct` message is quite cumbersome -- due to the lack of a parameterized constructor, one needs to create an empty (that is, initialized with default values) object and then set the two fields one by one. This PR replaces the default constructor with a parameterized constructor and uses it in the test `p2p_compactblocks.py`, reducing LOC. No need to pollute the namespace with temporary throw-away message objects anymore.
ACKs for top commit:
guggero:
Code review ACK 638441928a446726ce3a7fb20433a5478e7585bb.
epson121:
Code review ACK 638441928a446726ce3a7fb20433a5478e7585bb
Tree-SHA512: 3b58d276d714b73abc6cc98d1d52dec5f6026b33f03faaeb7dcbc5d83ac377555179f98b159b2b9ecc8957999c35a1dc082e3c69299c5fde4e35f1bd0587ce9d
637d8bce741213295bd9b9d1982cae663c701ba1 Change FILE_CHAR_BLOCKLIST to FILE_CHARS_DISALLOWED (Benoit Verret)
Pull request description:
Blocklist is ambiguous. It could mean a list of blocks.
Example: "blocknotify" in the same file refers to Bitcoin blocks.
ACKs for top commit:
MarcoFalke:
ACK 637d8bce741213295bd9b9d1982cae663c701ba1
laanwj:
ACK 637d8bce741213295bd9b9d1982cae663c701ba1 — this is a clear variable name improvement
theStack:
ACK 637d8bce741213295bd9b9d1982cae663c701ba1
jonatack:
ACK 637d8bce741213295bd9b9d1982cae663c701ba1
eriknylund:
ACK 637d8bce741213295bd9b9d1982cae663c701ba1
promag:
ACK 637d8bce741213295bd9b9d1982cae663c701ba1.
Tree-SHA512: 028e7102eeaf61105736c55c119a7f5c05411f2b6715a7939c41cb9e8f13afb757bbb6e7a302b3aae21722e69dab91f6eff8099e5884d248299905b4c7687c02
854382885f18aa9a95cdde3d11591b05c305ad3f refactor: test: improve wait_for{header,merkleblock} interface (Sebastian Falbesoner)
1356a45ef042e7bd3d539fbb606d6b1be547d00f test: complete impl. of msg_merkleblock and wait_for_merkleblock (Sebastian Falbesoner)
Pull request description:
Implements the missing initialization/serialization methods for `msg_merkleblock`, based on the already present class `CMerkleBlock`. Also changes the method `wait_for_merkleblock()` to be more precise by waiting for a merkleblock with a specified blockhash instead of an arbitrary one.
In the BIP37 test `p2p_filter.py`, this new method is used to make the test of receiving merkleblock and tx if a filter is set to be more precise, by checking if they also arrive in the right order.
In the course of this PR, also the interface for the methods `wait_for_merkleblock()` and `wait_for_header()` are improved to take a hex string instead of an integer, which is more typesafe and less of a burden to the caller.
ACKs for top commit:
MarcoFalke:
ACK 854382885f18aa9a95cdde3d11591b05c305ad3f
Tree-SHA512: adaf0ac728ef0b9929cb417a7a7b4c1346c400b2d365bf6914515c67b6cfe8f4a7ecc62fb514afdce9792f0bed833416f6bca6b9620f3d5dcdc66e4d5b0b7ea3
## Issue being fixed or feature implemented
1. we need to move time forward to let invs being relayed
2. nNextInvSend in SendMessages can be bumped up to 30+ seconds into the
future in rare cases
make sure timeouts in tests are high enough to relay tx inv/wait for
corresponding islock
## What was done?
tl;dr: bump mocktime while waiting, wait longer
extracted fixes from https://github.com/dashpay/dash/pull/5288 but I
expect this to fix other sporadic test failures too
## How Has This Been Tested?
tests are ok locally and in https://github.com/dashpay/dash/pull/5288
## Breaking Changes
n/a
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [ ] I have assigned this pull request to a milestone
## Motivation
Dash Core has a series of functional tests that do not behave in a
deterministic fashion and have a higher chance of failure, especially on
resource limited systems. This results in a lot of false-negatives
during CI runs, prompting the need to re-run them, which is annoying at
best and generates apathy towards CI failure at worst.
## History
The first approach was to isolate non-deterministic tests into their own
distinct GItLab runner, making it such that if a test failed, only that
one runner had to be restarted, instead of the multiple runners that
failed due to these tests.
One problem with this was that this approach effectively omitted these
tests from TSan and UBSan coverage as attempting to combine TSan and
UBSan would cause significant resource exhaustion.
## Description
An alternative approach is to introduce a new flag, `--retries`,
applicable only on non-deterministic tests, that allow a failed test to
be repeated up to a set number of times (default: 3), only reporting
failure once the limit is exhausted.
A limitation of this is that only the log dump from the last attempt
will be available.
---------
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
- updated data file with dash addresses
- removed witness/bench32 support from rpc_createmultisig.py
- other specific changes, such as wallet balances after N mined blocks
- updated descriptors for multisort sign (fixes for bitcoin#17056)
19a354b11f85a3c6c81ff83bf702bf7a40cf5046 Output a descriptor in createmultisig and addmultisigaddress (Andrew Chow)
Pull request description:
Give a descriptor from `createmultisig` and `addmultisigaddress`.
Extracted from #16528 with `addmultisgaddress` and tests added.
ACKs for top commit:
Sjors:
tACK 19a354b11f85a3c6c81ff83bf702bf7a40cf5046
MarcoFalke:
ACK 19a354b11f85a3c6c81ff83bf702bf7a40cf5046
promag:
Code review ACK 19a354b11f85a3c6c81ff83bf702bf7a40cf5046.
meshcollider:
utACK 19a354b11f85a3c6c81ff83bf702bf7a40cf5046
Tree-SHA512: e813125fbbc358ea8d45b1748de16a29a94efd83175b748fb8fa3b0bfc8e783ed36b6c554d84f5d4ead1ba252a83a3e937b6c3f75da7b8d3b4e55f94d6013771
4bb660be90a2811b53855bf1fd33a8dd9ba3db47 Add release note (Andrew Chow)
ed96b295d747738334459490c79b7360ab85aaf7 Update descriptors.md to include sortedmulti (Andrew Chow)
80be78ea75ac9833ee3db3d468ed09fc4fe6274c Test sortedmulti descriptor using BIP 67 tests (Andrew Chow)
6f588fd2276e5b713c6d36e3b01288484ddb59c0 Add sortedmulti descriptor and unit tests (Andrew Chow)
Pull request description:
Adds a `sortedmulti()` descriptor as mentioned in https://github.com/bitcoin/bitcoin/pull/17023#issuecomment-537596416.
`sortedmulti()` works in the same way as `multi` does but sorts the pubkeys in the resulting scripts in lexicographic order as described in [BIP67](https://github.com/bitcoin/bips/blob/master/bip-0067.mediawiki). Note that this does not add support for BIP67 nor is BIP67 fully supported by this descriptor (which is why it is not named `multi67()`) as it does not require compressed pubkeys.
Tests from BIP67 were added and documentation was updated.
ACKs for top commit:
instagibbs:
re-ACK 4bb660be90
Sjors:
re-ACK 4bb660be90a2811b53855bf1fd33a8dd9ba3db47
Tree-SHA512: 93b21112a74ebe0bf316d8f3e0291f69fd975cf0a29332f9728e7b880cad312b8b14007e86adcd7899f117b9303cbcf4cb35f3bb2f2f648d1a446f83f75a70a5
ec4c79326bb670c2cc1757ecfb1900f8460c5257 signrawtransaction*: improve error for partial signing (Anthony Towns)
3c481f8921bbc587cf287329f39243abe703b868 signrawtransactionwithkey: better error messages for bad redeemScript/witnessScript (Anthony Towns)
Pull request description:
Two fixes for `signrawtransactionwith{key,wallet}` (in addition to #16250): one that checks redeemScript/witnessScript matches scriptPubKey (and if both are provided that they match each other sanely), and the other changes the warning when some-but-not-all the signatures for a CHECKMULTISIG are provided to something that suggests more signatures may be all that's required.
Fixes: #13218Fixes: #14823
ACKs for top commit:
instagibbs:
utACK ec4c79326b
achow101:
Code Review ACK ec4c79326bb670c2cc1757ecfb1900f8460c5257
meshcollider:
utACK ec4c79326bb670c2cc1757ecfb1900f8460c5257
Tree-SHA512: 0c95c91d498e85b834662b9e5c83f336ed5fd306be7701ce1dbfa0836fbeb448a267a796585512f7496e820be668b07c2a0a2f45e52dc23f09ee7d9c87e42b35
01174596e69568c434198a86f54cb9ea6740e6c2 signrawtransactionwithkey: report error when missing redeemScript/witnessScript param (Anthony Towns)
Pull request description:
Adding support for "witnessScript" as an alternative to "redeemScript" when using "signrawtransactionwithkey" meant that the `RPCTypeCheckObj()` call in `SignTransaction` can't error out just because either parameter is missing -- it's only a problem if both are missing, which isn't a state `RPCTypeCheckObj()` tests for. This results in the regression described in #16249. This patch adds some code to test for this case and give a similar error, namely:
error code: -8
error message:
Missing redeemScript/witnessScript
Fixes: #16249
ACKs for top commit:
meshcollider:
utACK 01174596e6
promag:
ACK 01174596e. Could also write test without `dict`/`del`:
Tree-SHA512: cf51346b7dea551b7f18f2a93c2a336a293b2535c62c03a5263cd2be8c58cf0cc302891da659c167e88ad1a68a756472c3c07e99f71627c61d32886fc5a3a353
fab6a0a659 test: Add test that addmultisigaddress fails for watchonly addresses (MarcoFalke)
fad81d870a test: Fixup creatmultisig documentation and whitespace (MarcoFalke)
Pull request description:
Just to make sure this is not regressed on accidentally in the future
ACKs for commit fab6a0:
jonatack:
ACK fab6a0a659
Tree-SHA512: bf8dcbc752f8910902a995e55ce486621156aa01f112990344815c4aab980298dfecc108e78245a8986a00c3871338ad16fc818a1bce9dfc6b37b9c88851e39d
f40b3b82df [tests] functional test for createmultisig RPC (Anthony Towns)
b9024fdda3 segwit support for createmultisig RPC (Anthony Towns)
d58055d25f Move AddAndGetDestinationForScript from wallet to outputype module (Anthony Towns)
9a44db2e46 Add outputtype module (Anthony Towns)
Pull request description:
Adds an "address_type" parameter that accepts "legacy", "p2sh-segwit", and "bech32" to choose the type of address created. Defaults to "legacy" rather than the value of the `-address-type` option for backwards compatibility.
As part of implementing this, OutputType is moved from wallet into its own module, and `AddAndGetDestinationForScript` is changed to apply to a `CKeyStore` rather than a wallet, and to invoke `keystore.AddCScript(script)` itself rather than expecting the caller to have done that.
Fixes#12502
Tree-SHA512: a08c1cfa89976e4fd7d29caa90919ebd34a446354d17abb862e99f2ee60ed9bc19d8a21a18547c51dc3812cb9fbed86af0bef2f1e971f62bf95cade4a7d86237
1b41c2c8a126ef4be183e1d800a17d85cab8837b test: improve gettransaction test coverage (Jon Atack)
0f34f54888f680bfbe7a29ac278636d7178a99bb rpc: fix regression in gettransaction (Jon Atack)
Pull request description:
Closes#16872.
PR #16866 renamed the `decode` argument in gettransaction to `verbose` to make it more consistent with other RPC calls like getrawtransaction. However, it inadvertently overloaded the "details" field when `verbose` is passed. The result is that the original "details" field is no longer returned correctly, which seems to be a breaking API change.
This PR:
- takes the simplest path to restoring the "details" field by renaming the decoded one back to "decoded" while leaving the `verbose` argument for API consistency, which was the main intent of #16866,
- addresses [this comment](https://github.com/bitcoin/bitcoin/pull/16185#discussion_r320740413) by mentioning in the RPC help that the new decoded field is equivalent to decoderawtransaction, and
- updates the help, functional test, and release note.
Reviewers, to test this manually, build and run `bitcoin-cli help gettransaction` and `bitcoin-cli gettransaction <wallet txid> false true`, and verify that the command returns both `details` and `decoded` fields.
ACKs for top commit:
jnewbery:
tACK 1b41c2c8a126ef4be183e1d800a17d85cab8837b
Tree-SHA512: 287edd5db7ed58fe8b548975aba58628bd45ed708b28f40174f10a35a455d89f796fbf27430aa881fc376f47aabda8803f74d4d100683bd86577a02279091cf3
7dee8f48088c75ab0e51be60679505f8ce570919 [wallet] Rename 'decode' argument in gettransaction method to 'verbose' (John Newbery)
Pull request description:
This makes the RPC method consistent with other RPC methods that have a
'verbose' option.
Change the name of the return object from 'decoded' to details.
Update help text.
ACKs for top commit:
promag:
ACK 7dee8f48088c75ab0e51be60679505f8ce570919.
meshcollider:
Code review ACK 7dee8f48088c75ab0e51be60679505f8ce570919
0xB10C:
ACK 7dee8f48088c75ab0e51be60679505f8ce570919: reviewed code
Tree-SHA512: a3a62265c8e6e914591f3b3b9f9dd4f42240dc8dab9cbac6ed8d8b8319b6cc847db2ad1689d5440c162e0698f31e39fc6b868ed918b2f62879d61b9865cae66b
/**
* Dash specific comment
*
* Seems as event on_getdata works in our P2PInterface.
* But somehow it's never called for test 'test_in_flight_max',
* it may be due to bug in net_processing.
* Due to that, part of functional tests is disabled
*/
fab365835639a3da03f8ad9a58a0db6c6c4c2314 [qa] Test that getdata requests work as expected (Suhas Daftuar)
fa883ab35ad2d4328e35b1e855d0833740a6b910 net: Use mockable time for tx download (MarcoFalke)
Pull request description:
Two commits:
* First commit changes to mockable time for tx download (refactoring, should only have an effect on regtest)
* Second commit adds a test that uses mocktime to test tx download
ACKs for top commit:
laanwj:
code review ACK 16197/commits/fab365835639a3da03f8ad9a58a0db6c6c4c2314
jamesob:
ACK fab3658356
Tree-SHA512: 3a64a3e283ec4bab1f6e506404b11f0a564a5b61d2a7508ae738a61f035e57220484c66e0ae47d847fe9f7e3ff5cc834909d7b34a9bbcea6abe01f8742806908
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
9965940e35c445ccded55510348af228ff22f0e9 doc: Add release note for the new gettransaction argument (darosior)
b8b3f0435a2837d3897e9e232ef6ca839ce74eb8 tests: Add a new functional test for gettransaction (darosior)
7f3bb247a811582d1aa4805d8e601c19808dc7ba gettransaction: add an argument to decode the transaction (darosior)
Pull request description:
This PR adds a new parameter to the `gettransaction` call : `decode`. If set to `true`, it will add a new `decoded` field to the response. This mimics the behavior of `getrawtransaction`'s `verbose` argument to avoid using 2 calls if we want to decode a wallet transaction (`gettransaction` then `decoderawtransaction`).
Fix#16181 .
ACKs for top commit:
meshcollider:
re-utACK 9965940e35c445ccded55510348af228ff22f0e9
Tree-SHA512: bcb6b4bd252b3488d6afc77659c499c2ad99fd58661eb24b6a2e17014c74f22e47fde70e00fedb4f4754915786622ad02483b2cf2c4dea0ab0eb4ac8276dbeee
0fb2e69815 CreateTransaction: Assume minimum p2sh-p2wpkh spend size for unknown change (Gregory Sanders)
b06483c96a Remove stale comment in CalculateMaximumSignedInputSize (Gregory Sanders)
Pull request description:
This is triggered anytime a fundraw type call(psbt or legacy) is used with a change output address that the wallet doesn't know how to sign for.
This regression was added in 6a34ff5335 since BnB coin selection actually cares about this.
The fix is to assume the smallest typical spend, a P2SH-P2WPKH, which is calculated using a "prototype" dummy signature flow. Future work could generalize this infrastructure to get estimated sizes of inputs for a variety of types.
I also removed a comment which I believe is stale and misleading.
Tree-SHA512: c7e2be189e524f81a7aa4454ad9370cefba715e3781f1e462c8bab77e4d27540191419029e3ebda11e3744c0703271e479dcd560d05e4d470048d9633e34da16
5eb20f81d9 Consistently use ParseHashV to validate hash inputs in rpc (Ben Woosley)
Pull request description:
ParseHashV validates the length and encoding of the string and throws
an informative RPC error on failure, which is as good or better than
these alternative calls.
Note I switched ParseHashV to check string length first, because
IsHex tests that the length is even, and an error like:
"must be of length 64 (not 63, for X)" is much more informative than
"must be hexadecimal string (not X)" in that case.
Split from #13420
Tree-SHA512: f0786b41c0d7793ff76e4b2bb35547873070bbf7561d510029e8edb93f59176277efcd4d183b3185532ea69fc0bbbf3dbe9e19362e8017007ae9d51266cd78ae
cbf2d75d8f49b7b1e32acb5373b312b484f3fa6a qa: Add getdescriptorinfo functional test (João Barbosa)
Pull request description:
The `getdescriptorinfo` RPC was added in #15368, this PR adds some tests.
Top commit has no ACKs.
Tree-SHA512: 5bf3fb5842b975089821c7ac52202ecb23df255f655862646eb532e38e335ff963f8973bcf5b8bba386183281dc9bfe7279ba1cf25fd518c9a45fb45a9243e4d
d484279a46fe2cd5e133b6c18a1e00f802084772 test: add logging to wallet_listsinceblock.py (Jon Atack)
Pull request description:
This is the first commit from #17535.
Top commit has no ACKs.
Tree-SHA512: bb4f527a41bca3ffbf69e910311ce7f85dcc7a2be41350b3c653a27f4044f392b7e528f330e9691f497212469f6b16ce263230bb7a919548dd4e3e21cc72142f
54be4e71d898de8f14e3269550d56097c023d1cc test: check specific reject reasons in feature_csv_activation.py (Sebastian Falbesoner)
Pull request description:
This is kind of a prequel to #17921: increases the general quality of the functional test `feature_csv_activation.py` by checking for the specific reject reasons whenever the sending of a block fails. To get the reason, we have to limit the script threads to 1 via the parameter `-par=1`, like it is also done in `feature_cltv.py`:
a654626f07/test/functional/feature_cltv.py (L57-L61)
The commit also fixes a bug that was uncovered with this checks: for the BIP112 version 1 tx tests, txs from `bip112txs_vary_OP_CSV_v1` have been add twice to the list `failed_txs`:
a654626f07/test/functional/feature_csv_activation.py (L396-L397)
leading also to a block rejection as expected but for the wrong reason. It seems one of those two tx lists was meant to be `bip112txs_vary_OP_CSV_v1` (without the `_9`) and it was a typo.
ACKs for top commit:
MarcoFalke:
ACK 54be4e71d898de8f14e3269550d56097c023d1cc 📶
Tree-SHA512: 9aac11aee3f53f1ae95ddb346a2f268872038f4d118c8dcf81b8201dee869774c9f3c3f1c326e370b8fd4eaf8e0673371689a96d9b1cb91be4286c88824725c3
e4f4ea47ebf7774fb6f445adde7bf7ea71fa05a1 lint: Catch use of [] or {} as default parameter values in Python functions (practicalswift)
25dd86715039586d92176eee16e9c6644d2547f0 Avoid using mutable default parameter values (practicalswift)
Pull request description:
Avoid common Python default parameter gotcha when mutable `dict`/`list`:s are used as default parameter values.
Examples of this gotcha caught during review:
* https://github.com/bitcoin/bitcoin/pull/16673#discussion_r317415261
* https://github.com/bitcoin/bitcoin/pull/14565#discussion_r241942304
Perhaps surprisingly this is how mutable list and dictionary default parameter values behave in Python:
```
>>> def f(i, j=[], k={}):
... j.append(i)
... k[i] = True
... return j, k
...
>>> f(1)
([1], {1: True})
>>> f(1)
([1, 1], {1: True})
>>> f(2)
([1, 1, 2], {1: True, 2: True})
```
In contrast to:
```
>>> def f(i, j=None, k=None):
... if j is None:
... j = []
... if k is None:
... k = {}
... j.append(i)
... k[i] = True
... return j, k
...
>>> f(1)
([1], {1: True})
>>> f(1)
([1], {1: True})
>>> f(2)
([2], {2: True})
```
The latter is typically the intended behaviour.
This PR fixes two instances of this and adds a check guarding against this gotcha going forward :-)
ACKs for top commit:
Sjors:
Oh Python... ACK e4f4ea47ebf7774fb6f445adde7bf7ea71fa05a1. Testing tip: swap the two commits.
Tree-SHA512: 56e14d24fc866211a20185c9fdb274ed046c3aed2dc0e07699e58b6f9fa3b79f6d0c880fb02d72b7fe5cc5eb7c0ff6da0ead33123344e1a872209370c2e49e3f
403e372407db1d020eedede4d322ee79d4a85dfc qa: Relax so that the subscriber is ready before publishing zmq messages (João Barbosa)
Pull request description:
Prevents the syndrome "slow joiner" - see http://zguide.zeromq.org/py:all#sockets-and-patterns - by relaxing before publishing messages.
ACKs for top commit:
MarcoFalke:
unsigned ACK 403e372407db1d020eedede4d322ee79d4a85dfc
Tree-SHA512: 0e856accbc450a9b09160bdce5112b2103dc9436cc317d31fb1c9634ebd76823a300a2e727818057fb4d0a615271772ff23e80553a13e9aa1935500de5eeec5f
37f2784952cb6f598f82922f9ce71d40c9d74e26 tests: Use colors and dots in test_runner.py output only if standard output is a terminal -- allows for using the test runner output as input to other programs (practicalswift)
Pull request description:
Use colors and dots in `test_runner.py` output only if standard output is a terminal -- allows for using the test runner output as input to other programs.
I found the need for this when parsing `test_runner.py` output while investigating intermittent functional test failures.
Before:
```
$ test/functional/test_runner.py wallet_hd.py > output 2>&1
$ less output
Temporary test directory at /tmp/test_runner_₿_🏃_20190807_074115
ESC[1mWARNING!ESC[0m There is already a bitcoind process running on this system. Tests may fail unexpectedly due to resource contention!
Remaining jobs: [wallet_hd.py]
.......................................^M ^M1/1 - ESC[1mwallet_hd.pyESC[0m passed, Duration: 20 s
ESC[1mTEST | STATUS | DURATION
ESC[0mESC[0;32mwallet_hd.py | ✓ Passed | 20 s
ESC[0mESC[1m
ALL | ✓ Passed | 20 s (accumulated)
ESC[0mRuntime: 20 s
```
After:
```
$ test/functional/test_runner.py wallet_hd.py > output 2>&1
$ less output
Temporary test directory at /tmp/test_runner_₿_🏃_20190807_074244
1/1 - wallet_hd.py passed, Duration: 20 s
WARNING! There is already a bitcoind process running on this system. Tests may fail unexpectedly due to resource contention!
Remaining jobs: [wallet_hd.py]
TEST | STATUS | DURATION
wallet_hd.py | ✓ Passed | 20 s
ALL | ✓ Passed | 20 s (accumulated)
Runtime: 20 s
```
ACKs for top commit:
laanwj:
ACK 37f2784952cb6f598f82922f9ce71d40c9d74e26
Tree-SHA512: f15d95f9e07de2954c326d63d7a4bcd2971faeaa00386600dec2fb915ec89475aeef1dbc968b2c12aa5e988d4b3ed1974d6da0b6a3f1e1a105cfd90e8cb97cf6
afc0966d725aeeb8842dc264bd48f0e9c41f6a34 Moved and renamed hash256 from util.py to zmq_interface.py (Elichai Turkel)
Pull request description:
Right now there are two `hash256(bytes)` in the test framework:
first: https://github.com/bitcoin/bitcoin/blob/master/test/functional/test_framework/util.py#L186
second: https://github.com/bitcoin/bitcoin/blob/master/test/functional/test_framework/messages.py#L60
While they have the same name they're actually doing different things, one just does a sha256d and the other sha256d and reverses the bytes.
so I renamed the second one to be `hash256r` to signify that it's hash256 reversed.
ACKs for top commit:
MarcoFalke:
unsigned ACK afc0966d725aeeb8842dc264bd48f0e9c41f6a34
fanquake:
ACK afc0966d725aeeb8842dc264bd48f0e9c41f6a34
Tree-SHA512: fb0e2db6f09c0248d92f2fd72d05a78cec1bebb44449239dbeecefa62cf4bd01d180b2e6dbcee48a8a9cea79a909e224256cabdd0739f334c2943647fe0c5fe4
fa76285fddac613c518e73b35a7486ad2ab4b992 test: Explain why -whitelist is used in feature_fee_estimation (MarcoFalke)
faff85a69a5eb0fdfd8d9a24bc27d1812e49a152 test: Format feature_fee_estimation with pep8 (MarcoFalke)
Pull request description:
ACKs for top commit:
practicalswift:
ACK fa76285fddac613c518e73b35a7486ad2ab4b992 -- diff looks correct
Sjors:
ACK fa76285, every bit of clarification helps. It's clear that without `-whitelist` the test becomes extremely slow (it does pass).
Tree-SHA512: 13ec7e4cd0409e7bb76cbcd344e31c0f612c8ce4a1f1ec6ceaedf345f634bc09786ed38d38920c3469b2862c856ee3e5e42534ef90f531bd8dc83c3db3c06417
8a22fd01140bd957036fc00419b147e4268ae9b1 avoided os-dependant path (Ferdinando M. Ametrano)
Pull request description:
The current code fails on windows because of the forward slashes; using os.path.join solves the problem and it is in general more robust
ACKs for top commit:
MarcoFalke:
ACK 8a22fd01140bd957036fc00419b147e4268ae9b1
Tree-SHA512: 813f27aea33f97c8afac52e716a55fc5d7fb69621023aba99d40df7e1d145e0ec8d1eee49ddd403b219bf0e0e168e0e987b05c78eaef611f744d99bf2fc8bc91
## Issue being fixed or feature implemented
fix `p2p_quorum_data.py` test broken by #5276
## What was done?
adjust data request expiration timeout in tests
## How Has This Been Tested?
`./test/functional/test_runner.py p2p_quorum_data.py`
## Breaking Changes
n/a
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
bf3be5297a746982cf8e83f45d342121e5665f80 [qa] Ensure we don't generate a too-big block in p2sh sigops test (Suhas Daftuar)
Pull request description:
There's a bug in the loop that is calculating the block size in the p2sh sigops test -- we start with the size of the block when it has no transactions, and then increment by the size of each transaction we add, without regard to the changing size of the encoding for the number of transactions in the block.
This might be fine if the block construction were deterministic, but the first transaction in the block has an ECDSA signature which can be variable length, so we see intermittent failures of this test when the initial transaction has a 70-byte signature and the block ends up being one byte too big.
Fix this by double-checking the block size after construction.
ACKs for top commit:
jonasschnelli:
utACK bf3be5297a746982cf8e83f45d342121e5665f80
jnewbery:
tested ACK bf3be5297a746982cf8e83f45d342121e5665f80
Tree-SHA512: f86385b96f7a6feafa4183727f5f2c9aae8ad70060b574aad13b150f174a17ce9a0040bc51ae7a04bd08f2a5298b983a84b0aed5e86a8440189ebc63b99e64dc
e263a343d4b6a2622df6bb734cd9d51a0d20a663 test: rpc_users: Make variable names more clear. (Carl Dong)
830dc2dd0fccb7f3ec49ff7233a188d92c541e7e test: rpc_users: Also test rpcauth.py with specified password. (Carl Dong)
c73d871799982ca29c29cef90e1a78814cf34019 test: rpc_users: Add function for testing auth params. (Carl Dong)
604e2a997ff26202dd0fa1932d60dc14cc53ac6d test: rpc_users: Add function for auth'd requests. (Carl Dong)
Pull request description:
Fixes#14758
First two commits are tidy-ups which I feel are worthwhile as they are very straightforward, cut down the file by 50%, and made the final diff more minimal. Happy to squash after review.
ACKs for top commit:
laanwj:
ACK e263a343d4b6a2622df6bb734cd9d51a0d20a663
Tree-SHA512: aa75c48570a87060238932d4c68e17234e158077f6195fb4917367e1ecc565e3cd8dd0ae51f9159ddd3d03742739680391bc1246454302db22d4a608c0633e80
e13fea975d Add regression test for PSBT signing bug #14473 (Glenn Willen)
565500508a Refactor PSBTInput signing to enforce invariant (Glenn Willen)
0f5bda2bd9 Simplify arguments to SignPSBTInput (Glenn Willen)
53e6fffb8f Add bool PSBTInputSigned (Glenn Willen)
65166d4cf8 New PartiallySignedTransaction constructor from CTransction (Glenn Willen)
4f3f5cb4b1 Remove redundant txConst parameter to FillPSBT (Glenn Willen)
fe5d22bc67 More concise conversion of CDataStream to string (Glenn Willen)
Pull request description:
As discussed in the comments on #14473, I think that bug was caused primarily by failure to adhere to the invariant that a PSBTInput always has exactly one of the two utxo fields present -- an invariant that is already enforced by PSBTInput::IsSane, but which we were temporarily suspending during signing.
This refactor repairs the invariant, also fixing the bug. It also simplifies some other code, and removes redundant parameters from some related functions.
fixes#14473
Tree-SHA512: cbad3428175e30f9b7bac3f600668dd1a8f9acde16b915d27a940a2fa6d5149d4fbe236d5808fd590fb20a032274c99e8cac34bef17f79a53fdf69a5948c0fd0
<!--
*** Please remove the following help text before submitting: ***
Provide a general summary of your changes in the Title above
Pull requests without a rationale and clear improvement may be closed
immediately.
Please provide clear motivation for your patch and explain how it
improves
Dash Core user experience or Dash Core developer experience
significantly:
* Any test improvements or new tests that improve coverage are always
welcome.
* All other changes should have accompanying unit tests (see
`src/test/`) or
functional tests (see `test/`). Contributors should note which tests
cover
modified code. If no tests exist for a region of modified code, new
tests
should accompany the change.
* Bug fixes are most welcome when they come with steps to reproduce or
an
explanation of the potential issue as well as reasoning for the way the
bug
was fixed.
* Features are welcome, but might be rejected due to design or scope
issues.
If a feature is based on a lot of dependencies, contributors should
first
consider building the system outside of Dash Core, if possible.
-->
## Issue being fixed or feature implemented
<!--- Why is this change required? What problem does it solve? -->
<!--- If it fixes an open issue, please link to the issue here. -->
Before this fix, uniqueness of HPMN `platformNodeID` was checked only
while processing a block containing a `ProRegTx` or a `ProUpServTx`.
This is not enough as a `ProRegTx` or `ProUpServTx` containing duplicate
HPMN `platformNodeID` must be rejected at tx broadcast level.
## What was done?
<!--- Describe your changes in detail -->
Checking uniqueness when calling respective RPC and when receiving such
txs.
## How Has This Been Tested?
<!--- Please describe in detail how you tested your changes. -->
<!--- Include details of your testing environment, and the tests you ran
to -->
<!--- see how your change affects other areas of the code, etc. -->
## Breaking Changes
<!--- Please describe any breaking changes your code introduces -->
## Checklist:
<!--- Go over all the following points, and put an `x` in all the boxes
that apply. -->
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
## Issue being fixed or feature implemented
`CDeterministicMNList` stores internally a map containing the hashes of
all properties that needed to be unique.
`pubKeyOperator` don't differ between the two schemes (legacy and
basic(v19)) but their serialisation do: hence their hash.
Because this internal map stores only hashes, then we need to
re-calculate hashes and repopulate.
So when we tried to revoke a masternode after the fork, the `ProUpRevTx`
couldn't be mined because the hash of the `pubKeyOperator` differed.
## What was done?
When retrieving a `CDeterministicMNList` for a given block, if v19 is
active for that block, then we repopulate the internal map.
## How Has This Been Tested?
Without this fix, `feature_dip3_v19.py` is failing with
`failed-calc-cb-mnmerkleroot` (Error encountered on Testnet)
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
---------
Co-authored-by: pasta <pasta@dashboost.org>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
c4027e735072c3de4b4ffb20eecd7187ff36bad7 refactor: test: use wait_for_getdata() in p2p_compactblocks.py (Sebastian Falbesoner)
Pull request description:
The method `wait_for_getdata()` was recently changed to be more precise by waiting for a specified list of hashes, instead of only matching _any_ `getdata` message (see Issue #18614 and PR #18690). This PR replaces the remaining occurences of manual inspection of `last_messages` with this call.
ACKs for top commit:
robot-visions:
ACK c4027e735072c3de4b4ffb20eecd7187ff36bad7
Tree-SHA512: e10b346742f235b6ee2ef1f32f7fd74406c1a277389f020fb9913a93e94cc9530e1e9414872b83c9d2ae652ebce2b09b2c8c8372260c1afb4e0e54fbf7a935b0
faff9e4bb431919a4bc7e4dc4a9ca188e2d18113 test: Remove unused, undocumented and misleading CScript.__add__ (MarcoFalke)
Pull request description:
See the corresponding pull #18612
ACKs for top commit:
laanwj:
ACK faff9e4bb431919a4bc7e4dc4a9ca188e2d18113 provided it passes Travis
Tree-SHA512: 5d9c4d5b6453c70b24a6960d3b42834e9b31f6dbb99ac47a6abfd85f2739d5372563e7188c22aceabeee1c37eb218bf580848356f4a77268d65f178a9419b269
9e1cb1adf1800efe429e348650931f2669b0d2c0 [trivial/doc] Fix comment type (Amiti Uttarwar)
8f30260a67166a6ab7c0f33f7ec1990d3c31761e [doc] Update unbroadcast description in RPC results (Amiti Uttarwar)
750456d6f29c63d57af05bfbdd6035bb9c965de2 [trivial] Remove misleading 'const' (Amiti Uttarwar)
fa32e676e5833a5c5fc735ef00c0a80f5fab7a2c [test] Manage node connections better in mempool persist test (Amiti Uttarwar)
1f94bb0c744a103b633c1051e8fbc01e612097dc [doc] Provide rationale for randomization in scheduling. (Amiti Uttarwar)
9c8a55d9cb0ec73f10b196e79b637aa601c0a6b7 [mempool] Don't throw expected error message when upgrading (Amiti Uttarwar)
ba5498318233ab81decbc585e9619d8ffe2df1b0 [test] Test that wallet transactions aren't rebroadcast before 12 hours (Amiti Uttarwar)
00d44a534b4e5ae249b8011360c6b0f7dc731581 [test] P2P connection behavior should meet expectations (Amiti Uttarwar)
bd093ca15de762fdaf0937a0877d17b0c2bce16e [test] updates to unbroadcast test (Amiti Uttarwar)
dab298d9ab5a5a41685f437db9081fa7b395fa73 [docs] add release notes (Amiti Uttarwar)
Pull request description:
This PR is a follow up to #18038 which introduced the idea of an unbroadcast set & focuses mostly on documentation updates and test fixes. One small functionality update to not throw an expected error in `LoadMempool` when you upgrade software versions.
#18895 is another follow up to that addresses other functionality updates.
Background context:
The unbroadcast set is a mechanism for the mempool to track locally submitted transactions (via wallet or RPC). The node does a best-effort of delivering the transactions to the network via retries every 10-15 minutes until either a `GETDATA` is received or the transaction is removed from the mempool.
ACKs for top commit:
MarcoFalke:
ACK 9e1cb1adf1 👁
gzhao408:
ACK [`9e1cb1a`](9e1cb1adf1)
Tree-SHA512: 0cd51c4ca368b9dce92d50d73ec6e9df278a259e609eef2858f24cb8595ad07acc3db781d9eb0c351715f18fca5a2b4526838981fdb34a522427e9dc868bdaa6
651f1d816f054cb9c637f8a99c9360bba381ef58 [test] wait for inital broadcast before comparing mempool entries (gzhao408)
9d3f7eb9860254eb787ebe2734fd6a26bcf365c1 [mempool] sanity check that all unbroadcast txns are in mempool (gzhao408)
a7ebe48b94c5a9195c8eabd193204c499cb4bfdb [rpc] add unbroadcast info to mempool entries and getmempoolinfo (gzhao408)
d16006960443c2efe37c896e46edae9dca86c57d [wallet] remove nLastResend logic (gzhao408)
Pull request description:
Followup to #18038 by amitiuttarwar which introduces the unbroadcast set: "a mechanism for the mempool to track locally submitted transactions" and decreases the frequency of rebroadcast from 10-15 minutes to 12-36 hours.
This PR addresses some of the outstanding TODOs building on top of it:
- remove `nLastResend` logic, which is used to ensure rebroadcast doesn't happen again if no new block has been mined (makes sense in 10-15 min period, but not necessary for 12-36 hour period). (#18038 [comment](https://github.com/bitcoin/bitcoin/pull/18038#discussion_r416826914))
- expose unbroadcast info via RPCs, for more informative queries and testing (#18038 [comment](https://github.com/bitcoin/bitcoin/pull/18038#discussion_r416837980))
- add sanity check to verify unbroadcast transactions still exist in mempool before rebroadcasting (#18038 [comment](https://github.com/bitcoin/bitcoin/pull/18038#discussion_r416861609))
ACKs for top commit:
naumenkogs:
Code review ACK 651f1d816f054cb9c637f8a99c9360bba381ef58
amitiuttarwar:
ACK 651f1d816f054cb9c637f8a99c9360bba381ef58 🎉
MarcoFalke:
Review ACK 651f1d816f054cb9c637f8a99c9360bba381ef58
Tree-SHA512: d5327e95ef39d44152b48df5c610502ae11c168f43dbbfb2885340c93d1ba9426eb3a5794573f5fc843502109cb3ffb63efa3f2db4f8f112efcde8f76d9a8845
20b6e959449d0c07639599b99ba917d2cac62493 test: refactor functional tests to use restart_node (Christopher Coverdale)
Pull request description:
fixes#19345
This PR replaces consecutive calls to `stop_node()` and `start_node()` with `restart_node()` where appropriate in the functional tests.
The commit messages are repetitive but focused on each file changed with the intention of squashing if applicable.
ACKs for top commit:
laanwj:
ACK 20b6e959449d0c07639599b99ba917d2cac62493
Tree-SHA512: 1cfa1fb8c5f01a7b00fe44e80dbef072147f21e3891098817acd4275b0c5d91dc1c787594209e117edd418f2fa3a7b2dfcbafdf87efc07f740040938d641f3a9
80d4423f997e15780bfa3f91bf4b4bf656b8ea45 Test buffered valid message (Troy Giorshev)
Pull request description:
This PR is a tweak of #19302. This sends a valid message.
Additionally, this test includes logging in the same vein as #19272.
ACKs for top commit:
MarcoFalke:
tested ACK 80d4423f997e15780bfa3f91bf4b4bf656b8ea45 (added an assert(false) to observe deterministic coverage) 🌦
gzhao408:
ACK 80d4423f99👊
Tree-SHA512: 3b1aa5ec480a1661917354788923d64595e2886448c9697ec0606a81293e8b4a4642b2b3cc9afb2206ce6f74e5c6d687308c5ad19cb73c5b354d3071ad8496f8
9a40cfc558b3f7fa4fff1270f969582af17479a5 [refactor] use waiting inside disconnect_p2ps (gzhao408)
aeb9fb414e2d000830287d9dd3fed7fc2eb570d2 [test] wait for disconnect_p2ps to be reflected in getpeerinfo (gzhao408)
e81942d2e1288367e8da94adb2b2a88be99e4751 [test] logging and style followups for bloomfilter tests (gzhao408)
Pull request description:
Followup to #19083 which adds bloomfilter-related tests.
1. Make test_node `disconnect_p2ps` wait until disconnection is complete to avoid race conditions (and not place the burden on tests) from MarcoFalke's [comment](https://github.com/bitcoin/bitcoin/pull/19083#discussion_r437383989). And clean up any redundant `wait_until`s in the functional tests.
2. Clean up style + logging in p2p_filter.py and p2p_nobloomfilter_messages.py and jonatack's other [comments](https://github.com/bitcoin/bitcoin/pull/19083#pullrequestreview-428955784)
ACKs for top commit:
jonatack:
Code review ACK 9a40cfc from re-reviewing the diff and `git range-diff 5cafb46 8386ad5 9a40cfc`
MarcoFalke:
ACK 9a40cfc558b3f7fa4fff1270f969582af17479a5 🐂
Tree-SHA512: 2e14b1c12fc08a355bd5ccad7a2a734a4ccda4bc7dc7bac171cb57359819fc1599d764290729af74832fac3e2be258c5d406c701e78ab6d7262835859b9a7d87
fa156999695ddaeb016d8320bee62f8d96679d55 test: Add basic test for BIP 37 (MarcoFalke)
Pull request description:
This does not add full coverage, but should be a good start and can be extended in the future. Currently, none of the BIP 37 p2p code has test coverage.
ACKs for top commit:
practicalswift:
Code review ACK fa156999695ddaeb016d8320bee62f8d96679d55 -- more testing coverage is better than less testing coverage
Tree-SHA512: d52e8be79240dffb769105c087ae0ae9305d599282546e4ca7379c4c7add2dbcd668265b46670aa07c357638044cf0f61a6fab7dba8971dd0f80c8f99768686e
45eff751c6d07007dabc365dc4c0e6c63e3fe5cf Add functional test for P2P eviction logic of inbound peers (Martin Zumsande)
Pull request description:
This adds a functional test for the eviction logic for inbound peers, which is triggered when the number of maximum connections is exceeded.
The functional test covers eviction protection for peers that have sent us blocks or txns recently, or that have faster pings. I couldn't find a way to test the logic of `CConnman::AttemptToEvictConnection` that is based on netgroup (see #14210 for related discussion)
Fixes#16660 (at least partially).
[Edit: Earlier, this PR also contained a unit test, which was removed after the discussion]
ACKs for top commit:
jonatack:
ACK 45eff751c6d07007dabc365dc4c0e6c63e3fe5cf
naumenkogs:
Tested ACK 45eff75
fjahr:
re-ACK 45eff751c6d07007dabc365dc4c0e6c63e3fe5cf
andrewtoth:
re-ACK 45eff751c6d07007dabc365dc4c0e6c63e3fe5cf
Tree-SHA512: 177208ab6f30dc62da1cc5f51e654f7c9770d8c6b42aca6ae7ecb30e29d3096e04d75739578e7d149a0f29dd92652b4a707e93c0f1be8aa7ed315e6ec3ab07a4
fa98e10d5efcd965ee224ec21c9e79ebb123f055 test: Remove leftover comment in mining_basic (MarcoFalke)
faedb50d89cf113084adfa50c280c295c95571a8 test: pep-8 mining_basic (MarcoFalke)
Pull request description:
Remove an accidental leftover comment from #19082, which no longer applies and thus might be confusing
ACKs for top commit:
adamjonas:
code review ACK fa98e10
Tree-SHA512: c7f7f8f579b3c6e92f45769be0a7af1a421438a3f5524db5278b2269511a9e0e08f44e3836afb26727644035897ee51ff8296d13ce23030549e7403f57b40e40
6fc641644f7193365cf2b40f5cf20374ec871943 change blacklist to blocklist (TrentZ)
Pull request description:
Let's use a more appropriate and clear word and discard the usage of the blacklist. Blocklist is clear and shall make everyone happy.
ACKs for top commit:
amitiuttarwar:
ACK 6fc641644f7193365cf2b40f5cf20374ec871943
jonatack:
ACK 6fc641644f7193365cf2b40f5cf20374ec871943 git grep shows these two lines to be the only uses of the word in the codebase other than for specifying colors for the GUI.
sipsorcery:
ACK 6fc641644f7193365cf2b40f5cf20374ec871943 due to easy change.
Tree-SHA512: 12fd55ad5c79f1a227da90c7fa730972aae6b74ab1f9df79ec1e7d0eca05c383ef7d6ef5f353620a01da344db915005339b62ca0884179d0f47fbefb084c9efc
7daffc6a90a797ce7c365a893a31a31b0206985c [test] CScriptNum Decode Check as Unit Tests (Gillian Chu)
Pull request description:
The CScriptNum test (#14816) is a roundtrip test of the test framework. Thus, it would be better suited as a unit test. This is now possible with the introduction of the unit test module for the functional tests. See #18576.
This PR:
1. Refactors the CScriptNum tests into 2 unit tests, one in script.py and one in blocktools.py.
2. Extends the script.py CScriptNum test to trial larger numbers.
ACKs for top commit:
laanwj:
ACK 7daffc6a90a797ce7c365a893a31a31b0206985c
Tree-SHA512: 17a04a4bfff1b1817bfc167824c679455d9e06e6e0164c00a7e44f8aa5041c5f5080adcc1452fd80ba1a6d8409f976c982bc481d686c434edf97a5893a32a436
f0dfac7da3886f8c1a1eedd70f4fd2bd298b9cd9 test: add executable flag for rpc_estimatefee.py (Sebastian Falbesoner)
Pull request description:
Again a functional test without executable flag set sneaked in (see e.g. https://github.com/bitcoin/bitcoin/pull/17806 and https://github.com/bitcoin/bitcoin/pull/16742 for previous similar PRs, setting the filemode from 644 to 755). Maybe a linter like suggested in https://github.com/bitcoin/bitcoin/pull/17830 would be worth considering to avoid future (trivial) PRs like this?
ACKs for top commit:
promag:
ACK f0dfac7da3886f8c1a1eedd70f4fd2bd298b9cd9.
kristapsk:
ACK f0dfac7da3886f8c1a1eedd70f4fd2bd298b9cd9
Tree-SHA512: b37c11bdef439aa9d5736c9e0e0bbcc19aff876744f0c4e099ca5c67c9ff1293f1f9140f0d167ea13fee5396ae017aa4a0f1bae4f7aec8fa80b46beb421561c1
612a931d1a3ac1678d02aed30c48fd25ccd113db tests: simplify next_block() function in feature_block (John Newbery)
Pull request description:
The solve parameter is unnecessary. Remove it and add comments.
ACKs for top commit:
MarcoFalke:
ACK 612a931d1a3ac1678d02aed30c48fd25ccd113db
TheQuantumPhysicist:
ACK 612a931
Looks good. Thanks for improving it 😄
practicalswift:
ACK 612a931d1a3ac1678d02aed30c48fd25ccd113db -- simpler is better and patch looks correct :)
Tree-SHA512: 25b4879842ea37a3f598be886f02ce4c2fb0b5a618d02b266dbd380f5cbfdd71a8bd35ddd9d6f2cf83920e37c02caf9955a841a02b17ba75ac63f88d32f8b60b
111880aaf7e12a12f0797f1b19673e3d96328edd [test] Add coverage to estimaterawfee and estimatesmartfee (Ben Woosley)
Pull request description:
This adds light functional coverage to estimaterawfee - a subset of
the testing applied to estimatesmartfee, and argument validation
testing to both estimaterawfee and estimatesmartfee.
One valid estimatesmartfee signature test is commented out because it
fails currently.
Extracted from #12940
Top commit has no ACKs.
Tree-SHA512: 361a883457b28b2dc75081666e49d6dc6b5d76eed40d858abe2dd4f35ece152cf1f99c94480a91f42a896aa2a73cf55f57921316fe66970b2d7ba691a3b17e2d
## Issue being fixed or feature implemented
`develop` can't sync on mainnet and testnet atm because platform quorums
are already active there but we skip non-hpms nodes when calculating
quorums.
## What was done?
Fixed the code to respect `IsV19Active`. Also dropped
`IsLLMQTypeHPMNOnly` cause it's not used anywhere else and it just makes
things more confusing imo.
## How Has This Been Tested?
Can successfully sync on mainnet/testnet
## Breaking Changes
n/a, fixes breaking changes introduced earlier :)
## Checklist:
<!--- Go over all the following points, and put an `x` in all the boxes
that apply. -->
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
## Issue being fixed or feature implemented
## What was done?
1. Increased protocol version of mininode to match v19 changes in
`MNLISTDIFF` P2P message
2. Added verification of MNs and HPMNs (dip4) in `feature_llmq_hpmn.py`
## How Has This Been Tested?
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
## Issue being fixed or feature implemented
## What was done?
As discussed with Platform team, threshold for `llmq_test_platform`
needed to be 67%. Therefore, the size went from 4 members to 3 (while
keeping threshold to 2)
## How Has This Been Tested?
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
## Issue being fixed or feature implemented
## What was done?
- `masternode status` now returns the type as well
- `masternode count` now returns in addition total and total enabled MNs
per type.
## How Has This Been Tested?
Added functional tests
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [ ] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [x] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
## Issue being fixed or feature implemented
## What was done?
Implementation of 4k collateral HPMN.
## How Has This Been Tested?
## Breaking Changes
## Checklist:
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [x] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
---------
Co-authored-by: thephez <thephez@users.noreply.github.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
Co-authored-by: pasta <pasta@dashboost.org>
Co-authored-by: PastaPastaPasta <6443210+pastapastapasta@users.noreply.github.com>
Co-authored-by: UdjinM6 <1935069+Udjinm6@users.noreply.github.com>
Co-authored-by: Konstantin Akimov <545784+knst@users.noreply.github.com>
fa499b5f027f77c0bf13699852c8c06f78e27bef rpc: bugfix: Properly use iswitness in converttopsbt (MarcoFalke)
fa5c5cd141f0265a5693234690ac757b811157d8 rpc: Switch touched RPCs to IsValidNumArgs (MarcoFalke)
Pull request description:
When a serialized transaction has inputs, there is no risk in only trying to deserialize it with witness allowed. (This is how all transactions from p2p are deserialized.) In fact, it would avoid a common issue where a transaction with inputs can be deserialized in two ways:
* Fixes#12989
* Fixes#15872
* Fixes#15701
* Fixes#13738
* ...
When a serialized transaction has no inputs, there is no risk in only trying to deserialze it with witness disallowed. (A transaction without inputs can't have corresponding witness data)
ACKs for commit fa499b:
meshcollider:
utACK fa499b5f02
ryanofsky:
utACK fa499b5f027f77c0bf13699852c8c06f78e27bef. Changes since last review: consolidating commits and making iswitness documentation the same across methods.
PastaPastaPasta:
utACK fa499b5f027f77c0bf13699852c8c06f78e27bef
Tree-SHA512: a64423a3131f3f0222a40da557c8b590c9ff01b45bcd40796f77a1a64ae74c6680a6be9d01ece95c492dfbcc7e2810409d2c2b336c2894af00bb213972fc85c6
7813eb1db1 [qa] Overhaul p2p_compactblocks.py (Suhas Daftuar)
+ extra fixes for pull request #1966 (compact blocks)
Pull request description:
Remove tests of:
- compactblock behavior in a simulated pre-segwit version of bitcoind
This should have been removed a long time ago, as it is not generally
necessary for us to test the behavior of old nodes (except perhaps if we
want to test that upgrading from an old node to a new one behaves properly)
- compactblock behavior during segwit upgrade (ie verifying that network
behavior before and after activation was as expected)
This is unnecessary to test now that segwit activation has already happened.
ACKs for commit 7813eb:
jnewbery:
utACK 7813eb1db132c023902ad945995cc32a325893ca
Tree-SHA512: cadf035e6f822fa8cff974ed0c2e88a1d4d7da559b341e574e785fd3d309cc2c98c63bc05479265dc00550ae7b77fc3cbe815caae7f68bcff13a04367dca9b52
b651ef7e1c submitheader: more directly test missing prev block header (Gregory Sanders)
1e7f741745 remove some magic mining constants in functional tests (Gregory Sanders)
Pull request description:
The fewer magic numbers the better.
Also more directly tested a `submitheader` case of bad previous blockhash.
Tree-SHA512: 52b01a6aa199fa909eea4e9e84409a901933e545724e33149cc4132c82168199fd678809b6d94d95c9ff6ad02238a9552363620d13b8beaa5d4b67ade9ef425c
## Issue being fixed or feature implemented
it was picking the wrong DMN as a payee...
## What was done?
see code and notes
## How Has This Been Tested?
run tests
## Breaking Changes
n/a
## Checklist:
<!--- Go over all the following points, and put an `x` in all the boxes
that apply. -->
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [x] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
deaa6dd144f5650b385658a0c4f9a014aff8dde2 psbt: check output index is within bounds before accessing (Andrew Chow)
f1ef7f0aa46338f4cd8de79696027a1bf868f359 Don't calculate tx fees for PSBTs with invalid money values (Andrew Chow)
Pull request description:
Fixes#17149
Two classes of issues were found by the psbt fuzzer: values out of range and causing overflows, and prevout indexes being out of range. This PR fixes both.
When accessing a specific output using the index given in the tx, check that it is actually a possible output before trying to access the output.
When summing and checking amounts for `decodepsbt` and `analyzepsbt`, make sure that the values are actually valid money values.. Otherwise, stop summing and don't show the fee. For `analyzepsbt`, return that the next role is the Creator since the Creator needs to remake the transaction to be valid.
ACKs for top commit:
practicalswift:
ACK deaa6dd144f5650b385658a0c4f9a014aff8dde2 -- only change since last ACK was the addition of tests
gwillen:
tested ACK deaa6dd, would also like to see this merged!
Tree-SHA512: 06c36720bbb5a7ab1c29f7d15878bf9f0d3e5760c06bff479d412e1bf07bb3e0e9ab6cca820a4bfedaab71bfd7af813807e87cbcdf0af25cc3f66a53a06dbcfd
773d4572a4864ab7b6380858d07d9579ff6dd9a2 Mark PSBTs spending unspendable outputs as invalid in analysis (Andrew Chow)
638e40cb6080800c7b0a7f4028f63326acbe4700 Have a PSBTAnalysis state that indicates invalid PSBT (Andrew Chow)
Pull request description:
When analyzing an unspendable PSBT, report that it is unspendable and exit analysis early.
ACKs for top commit:
Sjors:
ACK 773d457
instagibbs:
After some thought ACK 773d4572a4
Tree-SHA512: 99b0cb2fa1ea37593fc65a20effe881639d69ddeeecf5197bc87bc7f2220cbeb40f1d429d517e4d27f2e9fb563a00cd845d2b4b1ce05246a75a6cb56fb9b0ba5
91cc18f602fe2ff7fe47335a8e1e7734895a19d9 [docs] Add release notes for PR 15427 (John Newbery)
3b11420b3c91f731b03805a39e48ee32e54484a2 [RPC] add new utxoupdatepsbt arguments to the CRPCCommand and CPRCConvertParam tables (John Newbery)
Pull request description:
The new `descriptors` argument was not added to the CRPCCommand and CPRCCvertParam tables, meaning that it couldn't be used with bitcoin-cli or named arguments.
Before this PR:
```
> bitcoin-cli utxoupdatepsbt 'cHNidP8BAFMCAAAAAYCdwVRx2X3o4KHx5tAMsN1ddp51MbfWsietjfMbl5HtAAAAAAD/////AQDh9QUAAAAAF6kUW+rtEOi4nk9rpw2F5XZl1dd8ehGHAAAAAAAAAA==' "[{\"desc\":\"sh(wpkh([bd50871a/0h/0h/0h]03895c66337b38699bfafff1084ad35bc347fac4f4e5e5fe5eb7dd81155280db53))\"}]"
error code: -3
error message:
Expected type array, got string
> bitcoin-cli --named utxoupdatepsbt psbt='cHNidP8BAFMCAAAAAYCdwVRx2X3o4KHx5tAMsN1ddp51MbfWsietjfMbl5HtAAAAAAD/////AQDh9QUAAAAAF6kUW+rtEOi4nk9rpw2F5XZl1dd8ehGHAAAAAAAAAA==' descriptors="[{\"desc\":\"sh(wpkh([bd50871a/0h/0h/0h]03895c66337b38699bfafff1084ad35bc347fac4f4e5e5fe5eb7dd81155280db53))\"}]"
error code: -8
error message:
Unknown named parameter descriptors
```
After this PR:
```
bitcoin-cli utxoupdatepsbt 'cHNidP8BAFMCAAAAAYCdwVRx2X3o4KHx5tAMsN1ddp51MbfWsietjfMbl5HtAAAAAAD/////AQDh9QUAAAAAF6kUW+rtEOi4nk9rpw2F5XZl1dd8ehGHAAAAAAAAAA==' "[{\"desc\":\"sh(wpkh([bd50871a/0h/0h/0h]03895c66337b38699bfafff1084ad35bc347fac4f4e5e5fe5eb7dd81155280db53))\"}]"
cHNidP8BAFMCAAAAAYCdwVRx2X3o4KHx5tAMsN1ddp51MbfWsietjfMbl5HtAAAAAAD/////AQDh9QUAAAAAF6kUW+rtEOi4nk9rpw2F5XZl1dd8ehGHAAAAAAAAAA==
bitcoin-cli --named utxoupdatepsbt psbt='cHNidP8BAFMCAAAAAYCdwVRx2X3o4KHx5tAMsN1ddp51MbfWsietjfMbl5HtAAAAAAD/////AQDh9QUAAAAAF6kUW+rtEOi4nk9rpw2F5XZl1dd8ehGHAAAAAAAAAA==' descriptors="[{\"desc\":\"sh(wpkh([bd50871a/0h/0h/0h]03895c66337b38699bfafff1084ad35bc347fac4f4e5e5fe5eb7dd81155280db53))\"}]"
cHNidP8BAFMCAAAAAYCdwVRx2X3o4KHx5tAMsN1ddp51MbfWsietjfMbl5HtAAAAAAD/////AQDh9QUAAAAAF6kUW+rtEOi4nk9rpw2F5XZl1dd8ehGHAAAAAAAAAA==
```
ACKs for top commit:
promag:
ACK 91cc18f.
fanquake:
re-ACK 91cc18f602fe2ff7fe47335a8e1e7734895a19d9
Tree-SHA512: 279b2339a5cac17e363002e4ab743e251d6757c904c89f1970575bdce18d4f63d5e13507e171bf2bdc1bf6dd457db345a4b11b15d4ff71b96c2fedc4ffe52b23
58cfbc38e040925b51cb8d35d23b50e9cf06fb2a Ignoring (but warn) on duplicate -wallet parameters (Jonas Schnelli)
Pull request description:
I expect that there are many users with load on startup wallet definitions in `bitcoin.conf` or via startup CLI argument.
With the new `settings.json` r/w configuration file, users unloading and loading a wallet through the GUI or via the RPC calls might end up with a duplicate `-wallet` entry (one that still remains in bitcoin.conf or CLI) plus the new duplication in `settings.json` due to the unload/load.
Steps to reproduce
* create wallet (if via RPC set `load_on_startup` or unloadwallet/loadwallet then set `load_on_startup`).
* stop bitcoin
* start bitcoind again with same `--wallet=mywallet`
I guess it is acceptable to skip duplicates.
ACKs for top commit:
achow101:
Tested ACK 58cfbc38e040925b51cb8d35d23b50e9cf06fb2a
meshcollider:
Code review ACK 58cfbc38e040925b51cb8d35d23b50e9cf06fb2a
ryanofsky:
Code review ACK 58cfbc38e040925b51cb8d35d23b50e9cf06fb2a. Changes since previous review: rebased, tweaked warning message, squashed/fixed test
Tree-SHA512: f94e5a999bdd7dc291f0bc142911b0a8033929350d6f6a35b58c4a06a3c8f83147be0f0c402d4e946dedbbcc85b7e023b672c731b6d7a8984d4780017c961cfb
fa5f46600fb98f1b35346bedc1a66c9019d01114 test: Fix rpc_net intermittent issue (MarcoFalke)
Pull request description:
Without the sync, the nodes might generate blocks at the same height and thus never be able to sync
ACKs for top commit:
practicalswift:
ACK fa5f46600fb98f1b35346bedc1a66c9019d01114: patch looks correct
Tree-SHA512: 21255795c2121c71fc620beb766855e57c7af94a668331d1b625665e22eb4b485a2b5c3ad2bb9a7042744f3c3e49c71251bcec41ba25bca03fd54aae32968a3a
## Issue being fixed or feature implemented
autoresending was really slow
## What was done?
reduced the time range to from 1-3 hours from now
## How Has This Been Tested?
hasn't
## Breaking Changes
Shouldn't be
## Checklist:
<!--- Go over all the following points, and put an `x` in all the boxes
that apply. -->
- [x] I have performed a self-review of my own code
- [x] I have commented my code, particularly in hard-to-understand areas
- [ ] I have added or updated relevant unit/integration/functional/e2e
tests
- [ ] I have made corresponding changes to the documentation
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
fa80b4788bbe3ef00c5d767c0d89ba9809d8707c test: Remove global wait_until from p2p_getdata (MarcoFalke)
999922baed3a80b581ce46daa01c4cbca4fcbfd8 test: Default mininode.wait_until timeout to 60s (MarcoFalke)
fab47375fe0bdec1e557e087fdb0707c4dfa7cc2 test: pep-8 p2p_getdata.py (MarcoFalke)
Pull request description:
Using the global wait_until makes it impossible to adjust the timeout based on the hardware the test is running on.
Fix that by using the mininode member function.
So for example, `./test/functional/p2p_getdata.py --timeout-factor=0.04` gives a timeout of 2.4 seconds.
ACKs for top commit:
laanwj:
ACK fa80b4788bbe3ef00c5d767c0d89ba9809d8707c
Tree-SHA512: ebb1b7860a64451de2b8ee9a0966faddb13b84af711f6744e8260d7c9bc0b382e8fb259897df5212190821e850ed30d4d5c2d7af45a97f207fd4511b06b6674a
9847e205bf7edcac4c30ce4b6d62f482aa7bc1b7 [docs] Improve commenting in ProcessGetData() (John Newbery)
2f032556e08a04807c71eb02104ca9589eaadf1b [test] test that an invalid GETDATA doesn't prevent processing of future messages (Amiti Uttarwar)
e257cf71c851e25e1a533bf1d4296f6b55c81332 [net processing] ignore unknown INV types in GETDATA messages (Amiti Uttarwar)
047ceac142246b5d51056a51dbf4645b31802be4 [net processing] ignore tx GETDATA from blocks-only peers (Amiti Uttarwar)
Pull request description:
Currently we'll stall peers that send us an unknown INV type in a GETDATA message. Be a bit more friendly and just drop the invalid request.
Ditto for blocks-relay-only peers that send us a GETDATA for a transaction.
There's a test for the first part. The second is difficult to test in the functional test framework since we aren't able to make blocks-relay-only connections.
ACKs for top commit:
sipa:
utACK 9847e205bf7edcac4c30ce4b6d62f482aa7bc1b7
brakmic:
ACK 9847e205bf
luke-jr:
utACK 9847e205bf7edcac4c30ce4b6d62f482aa7bc1b7
naumenkogs:
utACK 9847e20
ajtowns:
utACK 9847e205bf7edcac4c30ce4b6d62f482aa7bc1b7
Tree-SHA512: 6007f2fd839ffe737727f6fb8e8f083b2d9e05a510748f1d40b8f9be8fdf7b5419a36d8f1039923eec1ba2983e8f6f0436ec5fc196d9f6dcb0657f2ff8ff8e4c
09502452bbbe21bb974f1de8cf53196373921ab9 IsUsedDestination should count any known single-key address (Gregory Sanders)
Pull request description:
This plugs the privacy leak detailed at https://github.com/bitcoin/bitcoin/issues/17605, at least for the single-key case.
ACKs for top commit:
meshcollider:
Code Review ACK 09502452bbbe21bb974f1de8cf53196373921ab9
Tree-SHA512: e1d68281675f05072b3087171cba1df9416a69c9ccf70c72e8555e55eadda2d0fd339e5a894e3a3438ff94b9e3827fb19b8b701faade70c08756b19ff157ee0c
fab558612278909df93bdf88f5727b04f13aef0f doc: Use precise permission flags where possible (MarcoFalke)
Pull request description:
Instead of mentioning the all-encompassing `-whitelist*` settings, change the docs to mention the exact permission flag that will influence the behaviour.
This is needed because in the future, the too-broad `-whitelist*` settings (they either include *all* permission flags or apply to *all* peers) might be deprecated to require the permission flags to be enumerated.
Alternatively, in the future there could be an RPC to set the net permission flags on an existing connection, in which case the `-whitelist*` terminology is of no help.
ACKs for top commit:
jnewbery:
reACK fab558612278909df93bdf88f5727b04f13aef0f
fjahr:
Code review ACK fab558612278909df93bdf88f5727b04f13aef0f
jonatack:
ACK fab558612278909df93bdf88f5727b04f13aef0f
Tree-SHA512: c7dea3e577d90103bb2b0ffab7b7c8640b388932a3a880f69e2b70747fc9213dc1f437085671fd54c902ec2a578458b8a2fae6dbe076642fb88efbf9fa9e679c
8098dea06944f9de8b285f44958eb98761f133ee test: Add mempool_updatefromblock.py (Hennadii Stepanov)
Pull request description:
This PR adds a new test for mempool update of transaction descendants/ancestors information (count, size) when transactions have been re-added from a disconnected block to the mempool.
It could be helpful for working on PRs like #17925, #18191.
ACKs for top commit:
ariard:
ACK 8098dea
Tree-SHA512: 7e808fa8df8d7d7a7dbdc3f79361049b49c7bce9b58fd5539b28c9636bedac747695537e500d7ed68dc8bdb80167ad3f1c01086f7551691405d2ba2e38ef1d06
fa262712ca0981cb0ee68cd3dd99a214a20dcbf1 test: Check submitblock return values (MarcoFalke)
Pull request description:
Add `assert_equal` in some tests to check the `submitblock` return value
ACKs for top commit:
robot-visions:
ACK fa262712ca0981cb0ee68cd3dd99a214a20dcbf1
Tree-SHA512: 25d9effe82a4f6852184b9ac848f96336cc2cafb0bb07edb2792f00cd363f0759575bc9c164dd62f64425d3754028b4acd0675600c07d51277aa80bf66c6f960
9f5608c2893f89cd56c7c548b748996199e0da1d test: check for matching object hashes in wait_for_getdata (Danny Lee)
Pull request description:
Previously, `wait_for_getdata` only looked for the presence of a recent `"getdata"` message. Additionally checking the object hashes inside the message should make tests involving `wait_for_getdata` more robust.
`p2p_sendheaders.py` already overrides `wait_for_getdata` do this check; we can use the same approach consistently across all tests that call `wait_for_getdata`.
This PR is progress towards #18614 , but closing that issue would also involve some additional changes to `wait_for_getheaders`.
ACKs for top commit:
theStack:
ACK 9f5608c2893f89cd56c7c548b748996199e0da1d 🍻
Tree-SHA512: 8e7f95881c19631db014d4bb2399fea0d14686a32542f6ca3b60809744b0d684eac4e4c107c87143991f3cd0c2d4ab09d0c17486239768a9b40bee25f2e4d54a
fabfcad8764bb8f807b0ac5f3482b414278a4525 test: Bump timeout in wallet_import_rescan (MarcoFalke)
Pull request description:
Avoid timeouts when starting the node, also make error message more verbose
ACKs for top commit:
practicalswift:
ACK fabfcad8764bb8f807b0ac5f3482b414278a4525 -- patch looks correct
Tree-SHA512: 8fd60a05380349f521d0e814d2f268702dfbe57c7567a4f6e94435498dfdd32909179d75fded44757ecb1a93a4045842bc6d00bfd6cd18ba751513461359c7b0
fa320975411af4f0e41771d89958a77fd7a2284b test: Create cached blocks not in the future (MarcoFalke)
Pull request description:
This avoids test failures when tests assume blocks are not from the future, like in wallet_dump: https://cirrus-ci.com/task/6607130193035264?command=ci#L3306
ACKs for top commit:
jonatack:
ACK fa320975411af4f0e41771d89958a77fd7a2284b
Tree-SHA512: 60b6882e0e1df8c5d67f034533407a45d3685983891b67ff4631072bfd0a93a325c7ca18758d7a2df252e4fcdb7c87321cb1e84458b22782e57e719eec634c22
9cdddae3b4efee071d71ba3b6629a53017332f6f test: add rpc_signrawtransaction logging (Jon Atack)
4d6cde38cefa61209d307ed8015bdd40f2695668 test: refactor rpc_signrawtransaction witness script tests (Jon Atack)
Pull request description:
As a follow-up to #18484, the new tests are good but bury the one non-duplicate line in each test that sets the witness script, and there is no logging in the testfile. This PR makes it easy to see what is unique to each of the new tests and adds logging.
ACKs for top commit:
theStack:
ACK 9cdddae3b4🥚🐰
Tree-SHA512: 7b1ca303326658afb90b7635abc9fe8bb65f0be004124d4dcf38702bb6f38bc06ce33c0642be4ad5d511453d003cdefeea691e66e3b963a4feb66f6237a3c241
555567ace9baae3c80e118eeca434d5c424a3487 test: Extend wallet_dump test to cover comments (MarcoFalke)
Pull request description:
ACKs for top commit:
ryanofsky:
Code review ACK 555567ace9baae3c80e118eeca434d5c424a3487. Nice new checks in this test. I confirmed this catches the missing FormatISO8601DateTime call you discovered in https://github.com/bitcoin/bitcoin/pull/17954#discussion_r406891999
Tree-SHA512: 71aa23dd039f3bcdee642b01151edd1a0d44f48cedd070f5858148c8cb8abd6f5edfd212daeba38e35c843da5ea6c799e5a952105fdecedac355a5a843c05a84
6659810e2f38994813aa9d7644d570ae0152fa2c test: use named args for sendrawtransaction calls (Jon Atack)
5c1cd78b7e582660a78d9d9dec673967a6b78936 doc: improve rawtransaction code/test docs (Jon Atack)
acc14c50932c7353f94d3d4367d05021606e0ca9 test: fix incorrect value in rpc_rawtransaction.py (Jon Atack)
Pull request description:
Follow-up to PR #16521.
- Fix incorrect value in rpc_rawtransaction test as per https://github.com/bitcoin/bitcoin/pull/16521/files#r325842308
- Improve the code docs
- Use named arguments as per https://github.com/bitcoin/bitcoin/pull/16521/files#r310715127
Happy to squash or keep only the first commit if the others are too fixup-y.
ACKs for top commit:
laanwj:
ACK 6659810e2f38994813aa9d7644d570ae0152fa2c
Tree-SHA512: bf5258f23802ab3ba3defb8791097e08e63f3e2af21023f832cd270dc88d1fa04349e921d69f9f5fedac5dce5cd3c1cc46b48febbede4bc18dccb8be994565b2
2dfd6834ef8737e16e4b96df0c459f30a0721d6c test: Add test for default maxfeerate in sendrawtransaction (Joonmo Yang)
261843e4bef96ab296a9775819a99bfa60cad743 wallet/rpc: Use the default maxfeerate value as BTC/kB (Joonmo Yang)
Pull request description:
Fixes https://github.com/bitcoin/bitcoin/issues/16382
This patch tries to treat `maxfeerate` in sendrawtransaction/testmempoolaccept RPC as a rate(BTC/kB) instead of an absolute value(BTC).
The included test case checks if the new behavior works correctly, by using the transaction with an absolute fee of ~0.02BTC, where the fee rate is ~0.2BTC/kB.
This test should be failing if the default `maxfeerate` is 0.1BTC, but pass if the default value is 0.1BTC/kB
ACKs for top commit:
laanwj:
ACK 2dfd6834ef8737e16e4b96df0c459f30a0721d6c (ACKs by Sjors and MarcoFalke above for trivially different code)
Tree-SHA512: a1795bffe8a182acef8844797955db1f60bb0c0ded97148f3572dc265234d5219271a3a7aa0b6418a43f73b2b2720ef7412ba169c99bb1cdcac52051f537d6af
## Issue being fixed or feature implemented
This should speed up test `feature_llmq_data_recovery.py` for 30% from
500+ seconds to ~350 seconds (running locally) and all other tests that
uses any quorum, such as `feature_llmq_simplepose.py`
Time of CI running is also decreased noticeable 168min -> 131min
21 jobs for
[pr-5091/knst/dash/functional-tests-delays](https://gitlab.com/dashpay/dash/-/commits/pr-5091/knst/dash/functional-tests-delays)
in 131 minutes and 20 seconds (queued for 4 seconds)
vs some other pull request:
23 jobs for
[pr-5100/UdjinM6/dash/fix_GetStateFor_perf](https://gitlab.com/dashpay/dash/-/commits/pr-5100/UdjinM6/dash/fix_GetStateFor_perf)
in 195 minutes and 33 seconds (queued for 28 minutes and 13 seconds)
## What was done?
decreased delays in functional tests
## How Has This Been Tested?
I run several times locally and run CI/CD to see that it doesn't fail
## Breaking Changes
no breaking changes
## Checklist:
<!--- Go over all the following points, and put an `x` in all the boxes
that apply. -->
- [x] I have performed a self-review of my own code
**For repository code-owners and collaborators only**
- [x] I have assigned this pull request to a milestone
* Added quorum listextended
* Indentation fix
* Added release notes
* Added quorum listextended func test
* Refactored reply into map
* fix: change type from ARR to OBJ_DYN to properly print out the placeholder
Co-authored-by: pasta <pasta@dashboost.org>
facb71576cd4d2e90fd03e09d29b42fa3d730e8c net: Remove forcerelay of rejected txs (MarcoFalke)
Pull request description:
This removes the code that supposedly handled the forced relay of txs from a permissioned peer that were rejected from our mempool. The removal should be fine, because it is dead code for the following reasons:
* While `RelayTransaction` enqueues the inv for all peers, the inv is never processed because it can not be found in the mempool. See 4a07233076/src/net_processing.cpp (L3862-L3866)
* Even if the peers we intended to send the inv to can somehow reply with a getdata to the never-received inv, they won't receive the tx as a reply because it was never added to the "relay memory" (`mapRelay`)
The dead code is (obviously) untested: https://marcofalke.github.io/btc_cov/total.coverage/src/net_processing.cpp.gcov.html#2574
This feature was (intentionally or accidentally) removed in 4d8993b346, which was released in Bitcoin Core 0.13.0. So all currently supported versions of Bitcoin Core ship without this feature. I am not aware of any complaints about this feature or actual documented use-cases. So instead of reviving an unneeded feature, just remove the dead code.
ACKs for top commit:
hebasto:
ACK facb71576cd4d2e90fd03e09d29b42fa3d730e8c, locally running the unit and functional tests.
Tree-SHA512: bfceae6f2983c1510fa0649a9a63c343cbbc1c4ab3a3698039cccf454c81e58c8f5114b147ed42a1bc867da74c43a5b53764ab14f942e191b6f59079044108b5
aaaae4d0ebd5ef34d81997a73ab9839ba7b4b9e4 test: Add p2p test for forcerelay permission (MarcoFalke)
fa6b57bcaaf4dc65d78316353033b03d171a3beb test: Fix whitespace in p2p_permissions.py (MarcoFalke)
faf40810d7b7f42f3588bfa8a663095aa24001b1 test: Make msg_tx a witness tx (MarcoFalke)
Pull request description:
The commit `test: Make msg_tx a witness tx` is needed so that the python mininode does not strip the witness from transactions before sending them over p2p. The commit should also be done to keep symmetry with msg_block. See:
* tests: Make msg_block a witness block #15982
ACKs for top commit:
laanwj:
ACK aaaae4d0ebd5ef34d81997a73ab9839ba7b4b9e4
Tree-SHA512: b4b546c88f7f0576cb512f0872bc6bef9d4df65783803f226986e56175937f418aa1ed906417ac909f27f1fd521d64629621fda83250fa925c46ef9513db0e4c
5ffaf883b93fb8d3d841c36e808b90d61d39d492 test: eliminiated magic numbers in feature_csv_activation.py (Sebastian Falbesoner)
09f706ab8e47ddfdfa41418f2e7cb6d87661147a test: check for OP_CSV empty stack fail reject reason in feature_csv_activation.py (Sebastian Falbesoner)
cbd345a75c2be26e17fce4c65c0c1ca19a3eb9e0 test: test OP_CSV empty stack fail in feature_csv_activation.py (Sebastian Falbesoner)
Pull request description:
Adds an empty stack failure check for OP_CSV (BIP112) to the functional test `feature_csv_activation.py` by prepending a valid scriptSig with `OP_CHECKSEQUENCEVERIFY`.
If BIP112 is inactive, the operator just behaves as a NOP (for both tx versions 1 and 2) and the transaction remains valid -- if it is active, the tx is invalid due to an empty stack (for both tx versions 1 and 2, as well).
Top commit has no ACKs.
Tree-SHA512: 81102aaead5be11e02b894867fa9a9cc17358ec0eb2f21ce2d3db845b87691d305e6ed7c525f9c7e5bcb3c5c609eb28deca0fbaa3d5e9ff928cecd3b91ff129a
fa45d606461dbf5bf1017d6ab15e89c1bcf821a6 test: Reduce unneeded whitelist permissions in tests (MarcoFalke)
Pull request description:
It makes the tests confusing and fragile when overwriting default command line values that are not needed to be overwritten.
ACKs for top commit:
fanquake:
ACK fa45d606461dbf5bf1017d6ab15e89c1bcf821a6
laanwj:
ACK fa45d606461dbf5bf1017d6ab15e89c1bcf821a6
Tree-SHA512: 8ae5ad8c6be156b1a983adccbca8d868ef841e00605ea88e24227f1b7493987c50b3e62e68dd7dc785ad73d6e14279eb13d7a151cb0a976426fe2fd63ce5cbcd
b902bd66b0f35c5016dc5d7aaf501940935edd62 test: check custom descendant limit in mempool_packages.py (Sebastian Falbesoner)
Pull request description:
This is a follow-up PR to #17435, testing the custom descendant limit, passed by the argument `-limitdescendantcount`. ~~It was more tricky than expected, mainly because we don't know for sure at which point node1 has got all the transactions broadcasted from node0 (for the ancestor test this wasn't a problem since the txs were immediately available through `invalidateblock`) -- a simple `sync_mempools()` doesn't work here since the mempool contents are not equal due to different ancestor/descendant limits. Hence I came up with a "hacky manual sync":~~
1. ~~wait until the mempool has the _expected_ tx count (see conditions below)~~
2. ~~after that, wait some time and get sure that the mempool contents haven't changed in-between~~
~~Like for~~ Similar to the ancestor test, we overall check for ~~three~~ four conditions:
- the # of txs in the node1 mempool is equal to the descendant limit (plus 1 for the parent tx, plus the # txs from the previous ancestor test which are still in) ~~(done by the hacky sync above)~~
- all txs in node1 mempool are a subset of txs in node0 mempool
- part of the constructed descendant-chain (the first ones up to the limit) are contained in node1 mempool
- the remaining part of the constructed descendant-chain (all after the first ones up to the limit) is *not* contained in node1 mempool
ACKs for top commit:
JeremyRubin:
Excellent. utACK b902bd6
Tree-SHA512: 7de96dd248f16ab740e178ac5b64b57ead18cdcf74adfe989709d215e4a67b6b6d20de22c48e885d5f2edc55caaddd44a4261e996c5c87687ceb6a47f1d1fdaf
5bad7921d0b33b62c0a59a478c2e8c869fc5e3b5 [test] PSBT RPC: check that bip32_derivs are present by default (Sjors Provoost)
29a21c90610aed88b796a7a5900e42e9048b990e [rpc] set default bip32derivs to true for psbt methods (Sjors Provoost)
Pull request description:
In https://github.com/bitcoin/bitcoin/pull/13557#pullrequestreview-135905054 I recommended not including bip32 deriviation by default in PSBTs:
> _Bit of a privacy issue_: let's say person A and B are about to spend from a multisig address, sending everything to person A. Person A gives their address to person B, their wallet wallet creates a PSBT, but doesn't sign it. Wallet A then calls `walletprocesspsbt` which signs it and _spontaneously adds the master_fingerprint and bip32 path_. Same issue with `walletcreatefundedpsbt`.
>
> Adding `bip32_derivs` should probably be opt-in.
In practice I find this default quite annoying because I forget it and end up with a confused hardware wallet.
More importantly, in the multisig example I provided, it's actually essential for the other side to know the derivation details (in addition to an xpub). This allows them to check that change is going to an address you can still co-sign for (because the spending policy is unchanged except for an index).
ACKs for top commit:
instagibbs:
utACK 5bad7921d0
jonatack:
ACK 5bad7921d0 code review, built, ran tests, inspected/messed around with/pprinted values from the new tests. Thanks for adding the tests.
meshcollider:
utACK 5bad7921d0b33b62c0a59a478c2e8c869fc5e3b5
Tree-SHA512: 22ad71dda96856060a96758c4ae7aafa22d5e9efba30e0c8287c711e7579849bd72593cbc0f41a2e9e8821315d78bda04e848dbb006283b841b2795e2faebcfd
71d0344cf25d3aaf60112c5248198c444bc98105 docs: release note wording (Karl-Johan Alm)
3d2ff379131a01e4e9f9648b150e806104a23795 wallet/rpc: use static help text (Karl-Johan Alm)
53c3c1ea9e20f881c843a9219e48cec202e962f8 wallet/rpc/getbalances: add entry for 'mine.used' balance in results (Karl-Johan Alm)
Pull request description:
This addresses a few remaining issues pointed out in #13756:
* First commit addresses https://github.com/bitcoin/bitcoin/pull/13756#discussion_r284907468
* Second commit addresses https://github.com/bitcoin/bitcoin/pull/13756#discussion_r294868973
Ping jnewbery and achow101 as they pointed out these issues.
ACKs for commit 71d034:
jnewbery:
ACK 71d0344cf25d3aaf60112c5248198c444bc98105
meshcollider:
re-utACK 71d0344cf2
Tree-SHA512: 5e28822af0574ad07dbbed21aa2fe7866bf5770b4c0a1c150ad0da8af3152bcfb7170330a7497fa500326c594740ecf63733cf58325821e2811d7b911d5783a0
facfb4111d14a3b06c46690a2cca7ca91cea8a96 rpc: Deprecate getunconfirmedbalance and getwalletinfo balances (MarcoFalke)
999931cf8f167c7547f1015cdf05437a460c27f0 rpc: Add getbalances RPC (MarcoFalke)
fad13e925e197163a942f3f0d1ba2c95a2b65a56 rpcwallet: Make helper methods const on CWallet (MarcoFalke)
fad40ec9151248c6e8225e14980424f581d23e02 wallet: Use IsValidNumArgs in getwalletinfo rpc (MarcoFalke)
Pull request description:
This exposes the `CWallet::GetBalance()` struct over RPC.
In the future, incorrectly named rpcs such as `getunconfirmedbalance` or rpcs redundant to this such as `getbalance` could be removed.
ACKs for commit facfb4:
jnewbery:
utACK facfb4111d14a3b06c46690a2cca7ca91cea8a96
Tree-SHA512: 1f54fedce55df9a8ea82d2b6265354b39a956072621876ebaee2355aac0e23c7b64340c3279502415598c095858529e18b50789be956250aafda1cd3a8d948a5
6fc554f591d8ea1681b8bb25aa12da8d4f023f66 wallet: Reset reused transactions cache (Fabian Jahr)
Pull request description:
Fixes#17603 (together with #17824)
`getbalances` is using the cache within `GetAvailableCredit` under certain conditions [here](35fff5be60/src/wallet/wallet.cpp (L1826)). For a wallet with `avoid_reuse` activated this can lead to inconsistent reporting of `used` transactions/balances between `getbalances` and `listunspent` as pointed out in #17603. When an address is reused before the first transaction is spending from this address, the cache is not updated even after the transaction is sent. This means the remaining outputs at the reused address are not showing up as `used` in `getbalances`.
With this change, any newly incoming transaction belonging to the wallet marks all the other outputs at the same address as dirty.
ACKs for top commit:
kallewoof:
Code review re-ACK 6fc554f591d8ea1681b8bb25aa12da8d4f023f66
promag:
ACK 6fc554f591d8ea1681b8bb25aa12da8d4f023f66.
achow101:
Re-ACK 6fc554f591d8ea1681b8bb25aa12da8d4f023f66
meshcollider:
Code review ACK 6fc554f591d8ea1681b8bb25aa12da8d4f023f66
Tree-SHA512: c4cad2c752176d16d77b4a4202291d20baddf9f27250896a40274d74a6945e0f6b34be04c2f9b1b2e756d3ac669b794969df8f82a98e0b16f10e92f276649ea2
8f2d7737cc236b6122f30e31856eb3181960fba1 test: add functional test for non-standard txs with too large scriptSig (Sebastian Falbesoner)
Pull request description:
Approaches another missing functional test of issue #17394 (counterpart to unit test in PR #17480, Commit 5e8a56348b): A transaction is rejected by the mempool with reason `"scriptsig-size"` if any of the inputs' scriptSig is larger than 1650 bytes.
ACKs for top commit:
MarcoFalke:
ACK 8f2d7737cc236b6122f30e31856eb3181960fba1
instagibbs:
ACK 8f2d7737cc
Tree-SHA512: 7a45b8a4181158be3e3b91756783ddf032f132ca8780dc35fac91b2df2149268f784d28ac56005135c4d86a357c57805c5a54b8155f0d049932844b18dc03992
1be0b1fb2adcf95d76f879195564c0bf84162e31 test: add functional test for non-standard bare multisig txs (Sebastian Falbesoner)
Pull request description:
Approaches another missing functional test of issue #17394 (counterpart to unit test in PR #17502): A transaction is rejected by the mempool with reason `"bare-multisig"` if any of the outputs' scriptPubKey has bare multisig format (`M <PubKey1> <PubKey2> ... <PubKeyN> N OP_CHECKSIG`) and bitcoind is started with the argument `-permitbaremultisig=0`.
ACKs for top commit:
instagibbs:
utACK 1be0b1fb2a
kristapsk:
ACK 1be0b1fb2adcf95d76f879195564c0bf84162e31
Tree-SHA512: 2cade68c4454029b62278b38d0f137c2605a0e4450c435cdda2833667234edd4406f017ed12fa8df9730618654acbaeb68b16dcabb9f5aa84bad9f1c76c6d476
fa40e48c50d8ccf42ce5e66c12390e2ed4b60e75 ci: Remove unparseable lines from supp file for old xenial clang tsan (MarcoFalke)
fa1bfc476c9208a4c412c8ca74d05f52bb47766f ci: ubsan report_error_type=1 and add suppressions (MarcoFalke)
fa69cef13e5aab8264339eb3d50a9e89d59efd87 test: Print stderr when subprocess fails (MarcoFalke)
2222c305866a77065ab5be24c1c252bae252bb59 test: Use char instead of unsigned char (MarcoFalke)
faa8023ce9a47b282e1fac3ca8b3a7bb0042935a ci: Bump to clang-8 for asan build to avoid segfaults on ppc64le (MarcoFalke)
Pull request description:
Use clang-8 instead of default clang (which is clang-6 on Bionic) to avoid spurious segfaults when running the ci system on ppc64le
ACKs for top commit:
practicalswift:
ACK fa40e48c50d8ccf42ce5e66c12390e2ed4b60e75 assuming Travis is happy -- diff looks correct :)
Tree-SHA512: f4f26232d3a0ef38da245869340f723d279a3db9823befbc735fb5a00024dae041c7306d7ae55d2488e6f86aa96cdea155b007aefb561fba505141e8dbc717dc
900d8f6f70859f528e84c5c38d0332f81d19df55 util: Disallow network-qualified command line options (Russell Yanofsky)
Pull request description:
Previously these were allowed but ignored.
This change implements one of the settings simplifications listed in #17508. Change includes release notes.
ACKs for top commit:
laanwj:
ACK 900d8f6f70859f528e84c5c38d0332f81d19df55
Tree-SHA512: ab020a16a86c1e8ec709fbf798d533879d32c565eceeb7eb785c33042c49c6b4d1108c5453d8166e4a2abffc2c8802fbb6d3b895e0ddeefa8f274fd647e3c8ad
* tests: extend "age" period in `feature_llmq_connections.py`
see `NOTE`
* tests: sleep more in `wait_until` by default
Avoid overloading rpc with 20+ requests per second, 2 should be enough.
* tests: various fixes in `activate_dip0024`
- lower batch size
- no fast mode
- disable spork17 while mining
- bump mocktime on every generate call
* tests: bump mocktime on generate in `activate_dip8`
* tests: fix `reindex` option in `restart_mn`
Make sure nodes actually finished reindexing before moving any further.
* tests: trigger recovery threads and wait on mn restarts
* tests: sync blocks in `wait_for_quorum_data`
* tests: bump disconnect timeouts in `p2p_invalid_messages.py`
1 is too low for busy nodes
* tests: Wait for addrv2 processing before bumping mocktime in p2p_addrv2_relay.py
* tests: use `timeout_scale` option in `get_recovered_sig` and `isolate_node`
* tests: fix `wait_for...`s
* tests: fix `close_mn_port` banning test
* Bump MASTERNODE_SYNC_RESET_SECONDS to 900
This helps to avoid issues with 10m+ bump_mocktime on isolated nodes in feature_llmq_is_retroactive.py and feature_llmq_simplepose.py.
* style: fix extra whitespace
Co-authored-by: PastaPastaPasta <6443210+PastaPastaPasta@users.noreply.github.com>
fac2fc4dd8a28b99e17c57e4ab6580a3231f1d0a test: Increase debugging to hunt down mempool_reorg intermittent failure (MarcoFalke)
Pull request description:
Top commit has no ACKs.
Tree-SHA512: 4094b44afaa623e58b69f8d0332e60f0150b9ae2fd8bb265210d85546d887672ab8a3435cd9b086be14f69ab5b17e0f9fae06bd8aec1e7947ca766dd72b577c4
fae98668d150bae7a68167749ae134894cb1140e test: Fix intermittent error in mempool_reorg (MarcoFalke)
Pull request description:
Example: https://travis-ci.org/github/bitcoin/bitcoin/jobs/677689899#L4717
Also speed up tx relay and fix two pep8 errors while touching the file anyway.
ACKs for top commit:
vasild:
utACK fae9866
Tree-SHA512: 23a7894e71ad0e1a59c74c73643708fca21b505fa4e980038d554294063fd63c396669eefb233ffdffb0083968e51b702c643cb449df8f656dd8345a20f33907
fa192952507dbe5f405abffce38b3556923ba271 test: Bump timeouts to avoid valgrind failures (MarcoFalke)
Pull request description:
This should fix ci timeout issues such as:
* https://travis-ci.org/github/bitcoin/bitcoin/jobs/661946972#L3109
* https://travis-ci.org/github/bitcoin/bitcoin/jobs/662521570#L4922
ACKs for top commit:
practicalswift:
ACK fa192952507dbe5f405abffce38b3556923ba271
Tree-SHA512: 150f804957575033a83fd47c68fd6adff2c11b110ec5803bd77f121256349805b595c39a3a5047738ec538d082ee38cebbcb6792c787ef22f56b8dd0d9618c1f
2d23082cbe4641175d752a5969f67cdadf1afcea bump test timeouts so that functional tests run in valgrind (Micky Yun Chan)
Pull request description:
ci/tests: Bump timeouts so all functional tests run on travis in valgrind #17763
Top commit has no ACKs.
Tree-SHA512: 5a8c6e2ea02b715facfcb58c761577be15ae58c45a61654beb98c2c2653361196c2eec521bcae4a9a1bab8e409d6807de771ef4c46d3d05996ae47a22d499d54
faec689bed7a5b66e2a7675853d10205b933cec8 txmempool: Make entry time type-safe (std::chrono) (MarcoFalke)
faaa1f01daba94b021ca77515266a16d27f0364e util: Add count_seconds time helper (MarcoFalke)
1111170f2f0141084b5b4ed565b2f07eba48599a test: mempool entry time is persisted (MarcoFalke)
Pull request description:
This changes the type of the entry time of txs into the mempool from `int64_t` to `std::chrono::seconds`.
The benefits:
* Documents the type for developers
* Type violations result in compile errors
* After compilation, the two are equivalent (at no run time cost)
ACKs for top commit:
ajtowns:
utACK faec689bed7a5b66e2a7675853d10205b933cec8
laanwj:
ACK faec689bed7a5b66e2a7675853d10205b933cec8
Tree-SHA512: d958e058755d1a1d54cef536a8b30a11cc502b7df0d6ecf84a0ab1d38bc8105a67668a99cd5087a444f6de2421238111c5fca133cdf8e2e2273cb12cb6957845
faf45d1f1f997c316fc4c611a23c4456533eefe9 http: Avoid crash when g_thread_http was never started (MarcoFalke)
fa12a37b27f0570a551b8c103ea6537ee4a8e399 test: Replace inline-comments with logs, pep8 formatting (MarcoFalke)
fa83b39ff3ae3fbad93df002915c0e5f99c104a9 init: Remove confusing and redundant InitError (MarcoFalke)
Pull request description:
Avoid a crash during shutdown when the init sequence failed for some reason
ACKs for top commit:
promag:
Tested ACK faf45d1f1f997c316fc4c611a23c4456533eefe9.
ryanofsky:
Code review ACK faf45d1f1f997c316fc4c611a23c4456533eefe9. Thanks for updates, this is much easier to parse for me now. Since previous reviews: split out and reverted some cleanups & replaced chmod with mkdir in test
hebasto:
ACK faf45d1f1f997c316fc4c611a23c4456533eefe9, tested on Linux Mint 19.3 with the following patch:
Tree-SHA512: 59632bf01c999e65c724e2728ac103250ccd8b0b16fac19d3a2a82639ab73e4f2efb86c78e63c588a5954625d8d0cf9545e2a7e070e6e15d2a54beeb50e00b61
66fe7b1a98c03f690dcf60d359baac124658aeae test: added test for upgradewallet RPC (Harris)
Pull request description:
This PR adds tests for the newly merged *upgradewallet* RPC.
Additionally, it expands `test_framework/util.py` by adding the function `adjust_bitcoin_conf_for_pre_17` to support nodes that don't parse configuration sections.
This test uses two older node versions, v0.15.2 and v0.16.3, to create older wallet versions to be used by `upgradewallet`.
Fixes https://github.com/bitcoin/bitcoin/issues/18767
Top commit has no ACKs.
Tree-SHA512: bb72ff1e829e2c3954386cc308842820ef0828a4fbb754202b225a8748f92d4dcc5ec77fb146bfd5484a5c2f29ce95adf9f3fb4483437088ff3ea4a8d2c442c1
fa03713e133e3017112fdd5c278e0c8643054578 test: Properly raise FailedToStartError when rpc shutdown before warmup finished (take 2) (MarcoFalke)
Pull request description:
actually (?) fix#18561
See most recent traceback https://travis-ci.org/github/bitcoin/bitcoin/jobs/674668692#L7062
I believe the reason the error is still there is that ConnectionResetError is derived from OSError:
ConnectionResetError(ConnectionError(OSError))
And IOError is an alias for OSError since python 3.3, see https://docs.python.org/3/library/exceptions.html#IOError
So fix that by renaming IOError to the alias OSError and move the less specific catch clause down a few lines.
ACKs for top commit:
jonatack:
ACK fa03713e133e3017112fdd5c278e0c8643054578
Tree-SHA512: 6e5b214ed9101bf8ebe7472dcc1f9e9d128e2575c93ec00c8d0774ae1a9b52a8c2a653a45a0eab8d881570b08dd5ffeddf5aca88a10438c366e1f633253cb0b5
38677274f931088218eeb1f258077d3387f39c89 rpc: settxfee respects -maxtxfee wallet setting (Fabian Jahr)
bda84a08a0ac92dff6cadc99cf9bb8c3fadd7e13 rpc: Add documentation for deactivating settxfee (Fabian Jahr)
Pull request description:
~~Closes 18315~~
`settxfee` can be deactivated by passing 0 as the fee. That does not seem to be documented for the user so this PR adds it in the description. The return value of a simple boolean seems also too simplified given the multiple dimensions that this deactivation feature enables. I.e. it does not seem intuitive if the returned boolean shows that the call succeeded or if means that `settxfee` is active. My suggested solution is to change the return value to a JSON object that included the "active" state and the currently set fee rate.
Examples:
```
$ src/bitcoin-cli settxfee 0.0000000
{
"active": false,
"fee_rate": "0.00000000 BTC/kB"
}
$ src/bitcoin-cli settxfee 0.0001
{
"active": true,
"fee_rate": "0.00010000 BTC/kB"
}
```
ACKs for top commit:
MarcoFalke:
ACK 38677274f931088218eeb1f258077d3387f39c89, seems useful to error out early instead of later #16257🕍
jonatack:
ACK 38677274f931088218eeb
meshcollider:
LGTM, utACK 38677274f931088218eeb1f258077d3387f39c89
Tree-SHA512: 642813b5cf6612abb4b6cb63728081a6bd1659d809e0149c8f56060b6da7253fee989b3b202854f3051df3773c966799af30b612648c466b099f00590f356548
cc84460c164bcb2a874d4f08b3a2624e5ee9ff0a test: move sync_blocks and sync_mempool functions to test_framework.py (Roy Shao)
Pull request description:
This PR moves `sync_blocks` and `sync_mempool` out from `test_framework/util.py` to `test_framework/test_framework.py` so they can take contextual information of test framework into account.
* Change all reference callers to call functions from `test_framework.py`
* Remove `**kwargs` which is not used
* Take into account of `timeout_factor` when respecting timeout in function implementations.
* Pass all tests by running `./test/functional/test_runner.py`
fixes#18930
ACKs for top commit:
MarcoFalke:
ACK cc84460c164bcb2a874d4f08b3a2624e5ee9ff0a , reviewed with --color-moved=dimmed-zebra --color-moved-ws=ignore-all-space 💫
Tree-SHA512: a79b2a3fa842fc26a7aacb834bb2aea88b3049916c0b754e60002a77ce94bb5954e0ea3b436bf268e9295efb62d721dfef263a09339a55c684ac3fda388c275e
fac3716b09bb9ee121db629873d9694a95cae942 test: check that peer is connected when calling sync_* (MarcoFalke)
Pull request description:
Without a connection there is no way to sync, so we can fail early and don't have to wait for the timeout
ACKs for top commit:
jonatack:
ACK fac3716b09bb9
Tree-SHA512: 12f771473c23e152dae4bfb201fadb2c3530cf439de64fea07d048734614543080a5d05c9c36e6e398c6a69c8279f609d34706599571814172a11bcfbea4a3b9
38c3dd9c706e7e84b2a4dbaf1424a3f1c3b694fc docs: Add notes on how to diasble rpc timeout in functional tests while attatching gdb. (codeShark149)
784ae096259955ea7a294114f5c021c9489d2717 test: Add capability to disable RPC timeout in functional tests. (codeShark149)
Pull request description:
Many times, especially while debugging RPC callbacks to core using gdb, the test timeout kicks in before the response can get back. This can be annoying and requires restarting the functional test as well as gdb attachment.
This PR adds a `--notimeout` flag into `test_framework` and sets the `rpc_timeout` accordingly if the flag is set.
The same effect can be achieved with newly added `--factor` flag but keeping a separate flag that explicitly disables the timeout can be easier for new testers to find it out and separates its purpose from the `--factor` flag.
Requesting review ryanofsky jnewbery as per the IRC discussion.
Update: After initial round of review, the approach is modified to accommodate the functionality in already existing `--factor` flag. `--factor` is changed to `--timeout-factor` to express its intent better.
ACKs for top commit:
MarcoFalke:
ACK 38c3dd9c706e7e84b2a4dbaf1424a3f1c3b694fc and thanks for fixing up all my typos 😅
jnewbery:
ACK 38c3dd9c706e7e84b2a4dbaf1424a3f1c3b694fc.
Tree-SHA512: 9458dd1010288c62f8bb83f7a4893284fbbf938882dd65fc9e08810a910db07ef676e3100266028e5d4c8ce407b2267b3860595015da070c84a9d4a9816797db
2742c3428633b6ceaab6714635dc3adb74bf121b test: add factor option to adjust test timeouts (Harris)
Pull request description:
This PR adds a new option **factor** that can be used to adjust timeouts in various functional tests.
Several timeouts and functions from `authproxy`, `mininode`, `test_node` and `util` have been adapted to use this option. The factor-option definition is located in `test_framework.py`.
Fixes https://github.com/bitcoin/bitcoin/issues/18266
Also Fixes https://github.com/bitcoin/bitcoin/issues/18834
ACKs for top commit:
MarcoFalke:
Thanks! ACK 2742c3428633b6ceaab6714635dc3adb74bf121b
Tree-SHA512: 6d8421933ba2ac1b7db00b70cf2bc242d9842c48121c11aadc30b0985c4a174c86a127d6402d0cd73b993559d60d4f747872d21f9510cf4806e008349780d3ef
1abcecc40c518a98b7d17880657ec0247abdf125 Tests: Use self.chain instead of 'regtest' in almost all current tests (Jorge Timón)
Pull request description:
Simply avoiding the hardcoded string in more places for consistency.
It can also allow for more easily reusing tests for other chains other than regtest.
Separated from #8994 .
Continues #16509 .
It is still not complete (ie to be complete, we need the -chain parameter in #16680 and make whether acceptnonstdtxs is allowed for that chain or not customizable for regtest [or for custom chains like in #8994 ] ). But while being incomplete like #16509 , it's quite simple to review and another step forward IMO.
ACKs for top commit:
Sjors:
re-ACK 1abcecc. I think it's an improvement even if incomplete and if some PR's might accidentally bring "regtest" back. Subsequent improvements hopefully don't have to touch 16 files.
elichai:
Code review ACK 1abcecc40c518a98b7d17880657ec0247abdf125
ryanofsky:
Code review ACK 1abcecc40c518a98b7d17880657ec0247abdf125.
ryanofsky:
Code review ACK 1abcecc40c518a98b7d17880657ec0247abdf125
Tree-SHA512: 5620de6dab235ca8bd8670d6366c7b9f04f0e3ca9c5e7f87765b38e16ed80c17d7d1630c0d5fd7c5526f070830d94dc74cc2096d8ede87dc7180ed20569509ee
19139ee034d20ebab1b91d3ac13a8eee70b59374 Add documentation for test_shell submodule (JamesC)
f5112369cf91451d2d0bf574a9bfdaea04696939 Add TestShell class (James Chiang)
5155602a636c323424f75272ccec38588b3d71cd Move argparse() to init() (JamesC)
2ab01462f48b2d4e0d03ba842c3af8851c67c6f1 Move assert num_nodes is set into main() (JamesC)
614c645643e86c4255b98c663c10f2c227158d4b Clear TestNode objects after shutdown (JamesC)
6f40820757d25ff1ccfdfcbdf2b45b8b65308010 Add closing and flushing of logging handlers (JamesC)
6b71241291a184c9ee197bf5f0c7e1414417a0a0 Refactor TestFramework main() into setup/shutdown (JamesC)
ede8b7608e115364b5bb12e7f39d662145733de6 Remove network_event_loop instance in close() (JamesC)
Pull request description:
This PR refactors BitcoinTestFramework to encapsulate setup and shutdown logic into dedicated methods, and adds a ~~TestWrapper~~ TestShell child class. This wrapper allows the underlying BitcoinTestFramework to run _between user inputs_ in a REPL environment, such as a Jupyter notebook or any interactive Python3 interpreter.
The ~~TestWrapper~~ TestShell is motivated by the opportunity to expose the test-framework as a prototyping and educational toolkit. Examples of code prototypes enabled by ~~TestWrapper~~ TestShell can be found in the Optech [Taproot/Schnorr](https://github.com/bitcoinops/taproot-workshop) workshop repository.
Usage example:
```
>>> import sys
>>> sys.path.insert(0, "/path/to/bitcoin/test/functional")
```
```
>>> from test_framework.test_wrapper import TestShell
>>> test = TestShell()
>>> test.setup(num_nodes=2)
20XX-XX-XXTXX:XX:XX.XXXXXXX TestFramework (INFO): Initializing test directory /path/to/bitcoin_func_test_XXXXXXX
```
```
>>> test.nodes[0].generate(101)
>>> test.nodes[0].getblockchaininfo()["blocks"]
101
```
```
>>> test.shutdown()
20XX-XX-XXTXX:XX:XX.XXXXXXX TestFramework (INFO): Stopping nodes
20XX-XX-XXTXX:XX:XX.XXXXXXX TestFramework (INFO): Cleaning up /path/to/bitcoin_func_test_XXXXXXX on exit
20XX-XX-XXTXX:XX:XX.XXXXXXX TestFramework (INFO): Tests successful
```
**Overview of changes to BitcoinTestFramework:**
- Code moved to `setup()/shutdown()` methods.
- Argument parsing logic encapsulated by `parse_args` method.
- Success state moved to `BitcoinTestFramework.success`.
_During Shutdown_
- `BitcoinTestFramework` logging handlers are flushed and removed.
- `BitcoinTestFrameowork.nodes` list is cleared.
- `NetworkThread.network_event_loop` is reset. (NetworkThread class).
**Behavioural changes:**
- Test parameters can now also be set when overriding BitcoinTestFramework.setup() in addition to overriding `set_test_params` method.
- Potential exceptions raised in BitcoinTestFramework.setup() will be handled in main().
**Added files:**
- ~~test_wrapper.py~~ `test_shell.py`
- ~~test-wrapper.md~~ `test-shell.md`
ACKs for top commit:
jamesob:
ACK 19139ee034
jonatack:
ACK 19139ee034d20ebab1b91d3ac13a8eee70b59374
jnewbery:
Rather than invalidate the three ACKs for a minor nit, can you force push back to 19139ee034d20ebab1b91d3ac13a8eee70b59374 please? I think this PR was ready to merge before your last force push.
jachiang:
> Rather than invalidate the three ACKs for a minor nit, can you force push back to [19139ee](19139ee034) please? I think this PR was ready to merge before your last force push.
jnewbery:
ACK 19139ee034d20ebab1b91d3ac13a8eee70b59374
Tree-SHA512: 0c24f405f295a8580a9c8f1b9e0182b5d753eb08cc331424616dd50a062fb773d3719db4d08943365b1f42ccb965cc363b4bcc5beae27ac90b3460b349ed46b2
fa47330397 test: Speed up cache creation (MarcoFalke)
fa6ad7a5ec test: Bump MAX_NODES to 12 (MarcoFalke)
Pull request description:
When testing a combination of settings that affect the datadir (e.g. prune, blockfilter, ...) we may need a lot of datadirs.
Bump the maximum number of nodes proactively from 8 to 12, so that caches get populated with 12 node dirs, as opposed to 8.
Also, add an assert that the list of deterministic keys is exactly the number of max nodes (and not more than that.
Also, create the cache faster.
ACKs for commit fa4733:
laanwj:
utACK fa473303972b7dad600d949dc9b303d8136cb7e7
Tree-SHA512: 9803c765ed52d344102f5a3bce57b05d88a7429dcb05ed66ed6c881fda8d87c2834d02d21b95fe9f39c0efe3b8527e13cf94f006588cde22e8c2cd50b2d517a6
fa2cdc9ac2 test: Simplify create_cache (MarcoFalke)
fa25210d62 qa: Fix wallet_txn_doublespend issue (MarcoFalke)
1111aecbb5 qa: Always refresh stale cache to be out of ibd (MarcoFalke)
fab0d85802 qa: Remove mocktime unless required (MarcoFalke)
Pull request description:
When starting a test, we are always in IBD because the timestamps on cached blocks are in the past. Usually, we solve that by generating a block at the beginning of the test.
That is clumsy and might even lead to other problems such as #15360 and https://github.com/bitcoin/bitcoin/issues/14446#issuecomment-461926598
So fix that by getting rid of mocktime and always refreshing the last block of the cache when starting the test framework.
Should fix#14446
Tree-SHA512: 6af09800f9c86131349a103af617a54551f5f3f3260d38e14e3f30fdd3d91a0feb0100c56cbb12eae4aeac5571ae4b530b16345cbb831d2670237b53351a22c1
fa48405ef84985e5a9d38ec38e90d16596ea45b5 Warn on unknown rw_settings (MarcoFalke)
Pull request description:
Log a warning to debug log if unknown settings are encountered. This should probably only ever happen when the software is upgraded.
Something similar is already done for the command line and config file. See:
* test: Add test for unknown args #16234 (commit fa7dd88b71a1c6641bd450fae29a4a31849b1afd)
ACKs for top commit:
ryanofsky:
Code review ACK fa48405ef84985e5a9d38ec38e90d16596ea45b5. Looks good and I could see this being helpful for debugging. Thanks for taking suggestions
Tree-SHA512: cec7d88adf84fa0a842f56b26245157736eb50df433db951e622ea07fd145b899822b24cdab1d8b36c066415ce4f0ef09b493fa8a8d691532822a59c573aafa7
* fix(rpc): `masternode outputs` should produce an array
or it would ignore all but 1 outputs produced by the same tx
* rpc: improve `masternode outputs` help
* tests: check that `masternode outputs` show all outputs produced in the same tx
eca56f89293b74f11ca631ff2a0793e970e65841 test: replace 'regtest' leftovers by self.chain (Sebastian Falbesoner)
Pull request description:
This is a follow-up PR to #16681 (fixes#18068), replacing all remaining hardcoded `"regtest"` strings in functional tests by `self.chain`.
Top commit has no ACKs.
Tree-SHA512: 96524649b33164938e5a95215991103ed7855ebab55ef788d4816b3fa5cbc03d8f3b0d39f2247a87522f289fd7f4daf25e059900b8462b5127eb154bbee89054
1c23ea5fe67b88fd72a1ff640dd1bbb21a34fbf4 test: fix bitcoind already running warnings on macOS (fanquake)
Pull request description:
On macOS, `pidof` installed via brew returns b'' rather than None.
Account for this, to remove spurious warnings from the test_runner.
ACKs for top commit:
laanwj:
ACK 1c23ea5fe67b88fd72a1ff640dd1bbb21a34fbf4
Tree-SHA512: 640f4323d4105eac5c7abb52daf80486d5d3b4a074720490ceeb97c3dd8d73a3de9a988d2550f1e2076c620bb10d452b2959d8b723d2ee64f499878909824e31
fac942ca57dce6cfa5655a3ac8664d6a051bc01f test: Remove fragile assert_memory_usage_stable (MarcoFalke)
Pull request description:
This test fails on arm64 and a fuzz tests seems inappropriate for the functional test suite anyway, so remove it.
Example failures:
* https://travis-ci.org/bitcoin/bitcoin/jobs/611497963#L14517
* https://travis-ci.org/MarcoFalke/bitcoin-core/jobs/611029104#L3876
ACKs for top commit:
jamesob:
ACK fac942ca57
Tree-SHA512: 3577e7ce5891d221cb798454589ba796ed0c06621a26351bb919c23bc6bb46aafcd0b11cb02bbfde64b74d67cb2950da44959a7ecdc436491a34e8b045c1ccf4
49997813a4db388b2810e5e27ef771e8aa6a1f03 test: check custom ancestor limit in mempool_packages.py (Sebastian Falbesoner)
Pull request description:
The functional test `mempool_packages.py` starts one node with default ancestor/descendant limit settings and one with a custom, reduced ancestor limit (currently `-limitancestorcount=5`). The effect of the latter had not been tested yet though. This is approached in this PR by checking on the expected mempool contents of node1 after the node0 ancestor tests are done, via the following three conditions:
- the # of txs in the node1 mempool is equal to the the limit
- all txs in node1 mempool are a subset of txs in node0 mempool
- the node1 mempool txs match the start of the constructed tx-chain
Note that this still doesn't *fully* check the expected mempool of node1 (e.g. that it isn't influenced by `prioritisetransaction` RPC on node0), hence I add another TODO. In the future it would make sense to also set a custom descendant limit when the second TODO about checking node1's mempool is approached: 89e93135ae/test/functional/mempool_packages.py (L228)
ACKs for top commit:
MarcoFalke:
ACK 49997813a4db388b2810e5e27ef771e8aa6a1f03 👲
Tree-SHA512: d3a1d19fb49731238ad08ee7c02e2fa81a227e3b4ef3340d68598de42ddb62be9161134f6b8e08fa76b8c9faa02fecfa01111159642e20e9f358292a757b7608
af7bae734089f6af0029b0887932ccd9a469e12e [tests] Don't stop-start unnecessarily in rpc_fundrawtransaction.py (John Newbery)
9a8505299ba392acbab4647963113b0c29495f1d [tests] Use -whitelist in rpc_fundrawtransaction.py (John Newbery)
646b593bbd0db113c6e45ab92177b8f5251e8710 [tests] Speed up rpc_fundrawtransaction.py (John Newbery)
Pull request description:
Speed up rpc_fundrawtransaction.py
Most of the time in rpc_fundrawtransaction.py is spent waiting for
unconfirmed transactions to propagate. Net processing adds a poisson
random delay to the time it will INV transactions with a mean interval
of 5 seconds. Calls like the following:
```
self.nodes[2].sendrawtransaction(signedTx['hex'])
self.sync_all()
self.nodes[1].generate(1)
````
will therefore introduce a delay waiting for the mempools to sync.
Instead just generate the block on the node that sent the transaction:
```
self.nodes[2].sendrawtransaction(signedTx['hex'])
self.nodes[2].generate(1)
```
rpc_fundrawtransaction.py is not intended to be a test for transaction
relay, so it's ok to do this.
ACKs for top commit:
MarcoFalke:
ACK af7bae734089f6af0029b0887932ccd9a469e12e 🛴
Tree-SHA512: db3407d871bfdc99a02e7304b07239dd3585ac47f27f020f1a70608b7f6386b134343c01f3e4d1c246ce734676755897671999695068d6388602fb042d178780
436ad436434b94982bcb7dc1d13a21949263ef73 Fix issue with conflicted mempool tx in listsinceblock (Adam Jonas)
Pull request description:
Closes#8752 by bringing back abandoned #10470.
This now checks that returned transactions are not conflicting with any transactions that are filtered out by the given blockhash and add a functional test to prevent this in the future.
For more context, #8757 was closed in favor of #10470.
ACKs for top commit:
instagibbs:
utACK 436ad43643
kallewoof:
utACK 436ad436434b94982bcb7dc1d13a21949263ef73
jonatack:
I'm not qualifed to give an ACK here but 436ad436434b94982bcb7dc1d13a21949263ef73 appears reasonable. Built/ran tests/verified that this test fails without the change in rpcwallet.cpp:
Tree-SHA512: 63d75cd3d3f19fc84dc38899b200c96179b82b24db263cd0116ee5b715265be647157855c2e35912d2fbc49c7b37db9375d6aab0ac672f0f09bece8431de5ea9
72eaab073bc747425fe551777154b13a6c4c37c9 tests: functional watch-only wallet tests (William Casarin)
72ffbdc5799c1707ecad674d701b43fb80b031d0 doc: add release note for include_watchonly default changes (William Casarin)
003a3c73c0450aa18ac2ab2ca47def2b8c53a7df rpcwallet: document include_watchonly default for watchonly wallets (William Casarin)
a50d9e6c0b8e8144d3deec58ec2e3449ba081151 rpcwallet: default include_watchonly to true for watchonly wallets (William Casarin)
Pull request description:
Right now it's a bit annoying to deal with watchonly wallets, many rpc commands have an `include_watchonly` argument that needs to be explicitly set.
Wallets created with `createwallet` can have a `disable_private_keys` parameter, for those wallets we already know that they are watchonly, so there's no reason to have to explicitly ask for it for every command. Instead we check this wallet flag when the `include_watchonly` parameter isn't set.
ACKs for top commit:
achow101:
Code review ACK 72eaab073bc747425fe551777154b13a6c4c37c9
Sjors:
ACK 72eaab073bc747425fe551777154b13a6c4c37c9
promag:
ACK 72eaab073bc747425fe551777154b13a6c4c37c9, code review only, didn't look closely to the test.
kallewoof:
ACK 72eaab073bc747425fe551777154b13a6c4c37c9
fanquake:
ACK 72eaab073bc747425fe551777154b13a6c4c37c9 - I've looked over the changes, they make sense to me. Compiled and ran the tests etc.
Tree-SHA512: d3646b55e97f386594d7efc994f0712f3888475c6a5dc7f131ac9f8c49bf5d4677182b88f42b34152abe1ad101ecadd152b4c20e9d3c1267190db36f77ab8bd7
* fix(llmq): Ensure connections between quorums
Every masternode will now "watch" a single node from _every other_ quorum in addition to intra-quorum connections. This should make propagation of recsigs produced by one quorum to other quorums much more reliable.
* fix: Do this only for masternodes which participate in IS quorums
* refactor: rename `CQuorumManager::EnsureQuorumConnections` to better match the actual behaviour
(and avoid confusion with `CLLMQUtils::EnsureQuorumConnections`)
* refactor: move IS quorums watch logic into `CQuorumManager::CheckQuorumConnections`
avoid calling slow `ScanQuorums` (no caching atm) inside the loop
* tests: check that inter-quorum connections are added
* use `ranges::any_of`
* fix(llmq): mark mns "bad" based on the failed connect attempts count
Avoid using "last success time" as a proxy
* fix(tests): tweak feature_llmq_simplepose.py
0ea5d70b4756f376342417e0019490233cb4a918 Updated comment for the condition where a transaction relay is denied (glowang)
be01449cc8eb7bb97531a967f5d1dcc7b8865d1e Add test for param interaction b/w -blocksonly and -whitelistforcerelay (glowang)
Pull request description:
Related to: #18428
When -blocksonly is turned on, a node would still relay transactions from whitelisted peers. This funcitonality has not been tested.
ACKs for top commit:
MarcoFalke:
ACK 0ea5d70b4756f376342417e0019490233cb4a918
Tree-SHA512: 4e99c88281cb518cc67f5f3be7171a7b413933047b5d24a04bb3ff2210a82e914d69079f64cd5bac9206ec435e21a622c8e69cedbc2ccb39d2328ac5c01668e5
26fe9b990995f9cb5eee21d40b4daaad19f7181f Add support for descriptors to utxoupdatepsbt (Pieter Wuille)
3135c1a2d2e2fb31bc362c848bd2456d576e408b Abstract out UpdatePSBTOutput from FillPSBT (Pieter Wuille)
fb90ec3c33e824f5abb6a68452c683d6ce8b3e4a Abstract out EvalDescriptorStringOrObject from scantxoutset (Pieter Wuille)
eaf4f887348a08c620732125ad4430e1a133d434 Abstract out IsSegWitOutput from utxoupdatepsbt (Pieter Wuille)
Pull request description:
This adds a descriptors argument to the `utxoupdatepsbt` RPC. This means:
* Input and output scripts and keys will be filled in when known.
* P2SH-witness inputs will be filled in from the UTXO set when a descriptor is provided that shows they're spending segwit outputs.
This also moves some (newly) shared code to separate functions: `UpdatePSBTOutput` (an analogue to `SignPSBTInput`), `IsSegWitOutput`, and `EvalDescriptorStringOrObject` (implementing the string or object notation parsing used in `scantxoutset`).
ACKs for top commit:
jnewbery:
utACK 26fe9b990995f9cb5eee21d40b4daaad19f7181f
laanwj:
utACK 26fe9b990995f9cb5eee21d40b4daaad19f7181f (will hold merging until response to promag's comments)
promag:
ACK 26fe9b9, checked refactors and tests look comprehensive. Still missing a release note but can be added later.
Tree-SHA512: 1d833b7351b59d6c5ded6da399ff371a8a2a6ad04c0a8f90e6e46105dc737fa6f2740b1e5340280d59e01f42896c40b720c042f44417e38dfbee6477b894b245
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
* Remove unused variable
* [refactor] Move tx relay state to separate structure
* [refactor] Change tx_relay structure to be unique_ptr
* Check that tx_relay is initialized before access
* Add comment explaining intended use of m_tx_relay
* Add 2 outbound block-relay-only connections
Transaction relay is primarily optimized for balancing redundancy/robustness
with bandwidth minimization -- as a result transaction relay leaks information
that adversaries can use to infer the network topology.
Network topology is better kept private for (at least) two reasons:
(a) Knowledge of the network graph can make it easier to find the source IP of
a given transaction.
(b) Knowledge of the network graph could be used to split a target node or
nodes from the honest network (eg by knowing which peers to attack in order to
achieve a network split).
We can eliminate the risks of (b) by separating block relay from transaction
relay; inferring network connectivity from the relay of blocks/block headers is
much more expensive for an adversary.
After this commit, bitcoind will make 2 additional outbound connections that
are only used for block relay. (In the future, we might consider rotating our
transaction-relay peers to help limit the effects of (a).)
* Don't relay addr messages to block-relay-only peers
We don't want relay of addr messages to leak information about
these network links.
* doc: improve comments relating to block-relay-only peers
* Disconnect peers violating blocks-only mode
If we set fRelay=false in our VERSION message, and a peer sends an INV or TX
message anyway, disconnect. Since we use fRelay=false to minimize bandwidth,
we should not tolerate remaining connected to a peer violating the protocol.
* net_processing. Removed comment + fixed formatting
* Refactoring net_processing, removed duplicated code
* Refactor some bool in a many-arguments function to enum
It's made to avoid possible typos with arguments, because some of them have default values and it's very high probability to make a mistake here.
* Added UI debug option for Outbound
* Fixed data race related to `setInventoryTxToSend`, introduced in `[refactor] Move tx relay state to separate structure`
Co-authored-by: Suhas Daftuar <sdaftuar@gmail.com>
0e7c90eb37a687158c261ddd1ff9f1028a1e7012 test: speed up wallet_avoidreuse.py (Jon Atack)
6d50b2606ea9249627556051637080c3587b1b04 test: add logging to wallet_avoidreuse.py (Jon Atack)
Pull request description:
Inspired by PRs #17340 and #15881.
- add logging
- pass -whitelist in `set_test_params` to speed up transaction relay
`wallet_avoidreuse.py` is not intended to test P2P transaction relay/timing, so it should be fine to do this here. This reduces test run time variability and speeds up the test by 2-3 times on average.
Test run times in seconds:
- before: 20, 24, 22, 17, 27, 40, 30
- after: 10, 10, 8, 9, 10, 7, 8
ACKs for top commit:
MarcoFalke:
ACK 0e7c90eb37a687158c261ddd1ff9f1028a1e7012 🐊
fanquake:
ACK 0e7c90eb37a687158c261ddd1ff9f1028a1e7012
Tree-SHA512: 6d954a0aaf402c9594201626b59d29263479059e68fa5155bb44ed973cd0c3347729dd78b78b4d5a2275e45da365dc1afb4cc7e3293dea33fcc2e3e83a39faf5
5ebc6b0eb267e0552c66fffc5e5afe7df8becf80 bitcoind: update -avoidpartialspends description to account for auto-enable for avoid_reuse wallets (Karl-Johan Alm)
ada258f8c8f92d44d893cf9f22d15acdeca40b1a doc: release notes for avoid_reuse (Karl-Johan Alm)
27669551da52099e4a6a401acd7aa32b32832423 wallet: enable avoid_partial_spends by default if avoid_reuse is set (Karl-Johan Alm)
8f2e208f7c0468f9ba92bc789a698281b1c81284 test: add test for avoidreuse feature (Karl-Johan Alm)
0bdfbd34cf4015de87741ff549db35e5064f4e16 wallet/rpc: add 'avoid_reuse' option to RPC commands (Karl-Johan Alm)
f904723e0d5883309cb0dd14b826bc45c5e776fb wallet/rpc: add setwalletflag RPC and MUTABLE_WALLET_FLAGS (Karl-Johan Alm)
8247a0da3a46d7c38943ee0304343ab7465305bd wallet: enable avoid_reuse feature (Karl-Johan Alm)
eec15662fad917b169f5e3b8baaf4301dcf00a7b wallet: avoid reuse flags (Karl-Johan Alm)
58928098c299efdc7c5ddf2dc20716ca5272f21b wallet: make IsWalletFlagSet() const (Karl-Johan Alm)
129a5bafd9a3efa2fa16d780885048a06566d262 wallet: rename g_known_wallet_flags constant to KNOWN_WALLET_FLAGS (Karl-Johan Alm)
Pull request description:
Add a new wallet flag called `avoid_reuse` which, when enabled, will keep track of when a specific destination has been spent from, and will actively "blacklist" any new UTXOs which send to an already-spent-from destination.
This improves privacy, as a payer could otherwise begin tracking a payee's wallet by regularly peppering a known UTXO with dust outputs, which would then be scooped up and used in payments by the payee, allowing the payer to map out (1) the inputs owned by the payee and (2) the destinations to which the payee is making payments.
This replaces #10386 and together with the (now merged) #12257 it addresses #10065 in full. The concerns raised in https://github.com/bitcoin/bitcoin/pull/10386#issuecomment-302361381 are also addressed due to #12257.
~~Note: this builds on top of #15780.~~ (merged)
ACKs for commit 5ebc6b:
jnewbery:
ACK 5ebc6b0eb
laanwj:
Concept and code-review ACK 5ebc6b0eb267e0552c66fffc5e5afe7df8becf80
meshcollider:
Code review ACK 5ebc6b0eb2
achow101:
ACK 5ebc6b0eb267e0552c66fffc5e5afe7df8becf80 modulo above nits
Tree-SHA512: fdef45826af544cbbb45634ac367852cc467ec87081d86d08b53ca849e588617e9a0a255b7e7bb28692d15332de58d6c3d274ac003355220e4213d7d9070742e
aa410c2b17 rpc: Validate maxfeerate with AmountFromValue (João Barbosa)
Pull request description:
With this change `maxfeerate` can also be set as a string, accordingly to the help test:
```
maxfeerate (numeric or string,
```
Beside, there are no tests for the removed errors.
ACKs for commit aa410c:
meshcollider:
utACK aa410c2b17
MarcoFalke:
utACK aa410c2b17 Good catch
Tree-SHA512: f3bfea91dc7daa943729e270585dbf333055aeda805fbd01eaab20a7e0e6147382647c11525334382d198df0d3d45da6102b541efda5a1361f96271c98d5d89d
90df92206cfce4e61eff9d584112643512f6b91c test: Change filemode of rpc_whitelist.py (Emil Engler)
Pull request description:
All python tests have the file mode `755`.
Probably due to a mistake `rpc_whitelist.py` is the only test with the permission `644`.
This PR makes it coherent with the other tests and updates it to `755` as well.
ACKs for top commit:
practicalswift:
ACK 90df92206cfce4e61eff9d584112643512f6b91c -- all tests should be executable
Tree-SHA512: b9e69cb5184a3bbee4c7b14ac35985145a9fd3403d0e449d79f15c18e9660cafec495d639f5f730e0c69dde5f4a3d7590b4e42d385e794cd02add1f4e3b785e7
2081442c421cc4376e5d7839f68fbe7630e89103 test: Add test for rpc_whitelist (Emil Engler)
7414d3820c833566b4f48c6c120a18bf53978c55 Add RPC Whitelist Feature from #12248 (Jeremy Rubin)
Pull request description:
Summary
====
This patch adds the RPC whitelisting feature requested in #12248. RPC Whitelists help enforce application policies for services being built on top of Bitcoin Core (e.g., your Lightning Node maybe shouldn't be adding new peers). The aim of this PR is not to make it advisable to connect your Bitcoin node to arbitrary services, but to reduce risk and prevent unintended access.
Using RPC Whitelists
====
The way it works is you specify (in your bitcoin.conf) configurations such as
```
rpcauth=user1:4cc74397d6e9972e5ee7671fd241$11849357f26a5be7809c68a032bc2b16ab5dcf6348ef3ed1cf30dae47b8bcc71
rpcauth=user2:181b4a25317bff60f3749adee7d6bca0$d9c331474f1322975fa170a2ffbcb176ba11644211746b27c1d317f265dd4ada
rpcauth=user3:a6c8a511b53b1edcf69c36984985e$13cfba0e626db19061c9d61fa58e712d0319c11db97ad845fa84517f454f6675
rpcwhitelist=user1:getnetworkinfo
rpcwhitelist=user2:getnetworkinfo,getwalletinfo, getbestblockhash
rpcwhitelistdefault=0
```
Now user1 can only call getnetworkinfo, user2 can only call getnetworkinfo or getwalletinfo, while user3 can still call all RPCs.
If any rpcwhitelist is set, act as if all users are subject to whitelists unless rpcwhitelistdefault is set to 0. If rpcwhitelistdefault is set to 1 and no rpcwhitelist is set, act as if all users are subject to whitelists.
Review Request
=====
In addition to normal review, would love specific review from someone working on LN (e.g., @ roasbeef) and someone working on an infrastructure team at an exchange (e.g., @ jimpo) to check that this works well with their system.
Notes
=====
The rpc list is spelling sensitive -- whitespace is stripped though. Spelling errors fail towards the RPC call being blocked, which is safer.
It was unclear to me if HTTPReq_JSONRPC is the best function to patch this functionality into, or if it would be better to place it in exec or somewhere else.
It was also unclear to me if it would be preferred to cache the whitelists on startup or parse them on every RPC as is done with multiUserAuthorized. I opted for the cached approach as I thought it was a bit cleaner.
Future Work
=====
In a future PR, I would like to add an inheritance scheme. This seemed more controversial so I didn't want to include that here. Inheritance semantics are tricky, but it would also make these whitelists easier to read.
It also might be good to add a `getrpcwhitelist` command to facilitate permission discovery.
Tests
=====
Thanks to @ emilengler for adding tests for this feature. The tests cover all cases except for where `rpcwhitelistdefault=1` is used, given difficulties around testing with the current test framework.
ACKs for top commit:
laanwj:
ACK 2081442c421cc4376e5d7839f68fbe7630e89103
Tree-SHA512: 0dc1ac6a6f2f4b0be9c9054d495dd17752fe7b3589aeab2c6ac4e1f91cf4e7e355deedcb5d76d707cbb5a949c2f989c871b74d6bf129351f429569a701adbcbf
b6f9e3576a1ea18572e4803aeb3f39330f0cb759 test: re-enable CLI test support by using EncodeDecimal in json.dumps() (fanquake)
Pull request description:
As mentioned in https://github.com/bitcoin/bitcoin/pull/17675#issuecomment-563188648.
ACKs for top commit:
practicalswift:
ACK b6f9e3576a1ea18572e4803aeb3f39330f0cb759 assuming Travis is happy too -- diff looks correct :)
MarcoFalke:
> ACK b6f9e35 assuming Travis is happy too -- diff looks correct :)
Tree-SHA512: 79fa535cc1756c8ee610a3d6a316a1c4f036797d6990a5620e44985393a2e52f78450f8e0021d0a148c08705fd1ba765508464a365f9030ae0d2cacbd7a93e19
1583498fb6781c01ca2f33c09319ed793964c574 Send and require SENDADDRV2 before VERACK (Pieter Wuille)
c5a89196602e43ebb1cdc9cd4f08d153419c13e1 Don't send 'sendaddrv2' to pre-70016 software (Pieter Wuille)
Pull request description:
BIP155 defines addrv2 and sendaddrv2 for all protocol versions, but some implementations reject messages they don't know. As a courtesy, don't send it to nodes with a version before 70016, as no software is known to support BIP155 that doesn't announce at least that protocol version number.
Also move the sending of sendaddrv2 earlier (before sending verack), as proposed in https://github.com/bitcoin/bips/pull/1043. This has the side effect that local address broadcast of torv3 will work (as it'll only trigger after we know whether or not the peer supports addrv2).
ACKs for top commit:
MarcoFalke:
ACK 1583498fb6781c01ca2f33c09319ed793964c574
jnewbery:
ACK 1583498fb6781c01ca2f33c09319ed793964c574
jonatack:
ACK 1583498fb6781c01ca2f33c09319ed793964c574
vasild:
ACK 1583498
Tree-SHA512: 3bd5833fa8c8567b6dedd99e4a9b6bb71c127aa66d5284b217503c86d597dc59aa7382c41f3a4bf561bb658b89db81d1a7703a700eef4ffc17cb916660e23a82
a51d0ad2de89b9757d158df95ddeba2bfcb23935 rpc: Improve addnode remove command error message (Fabian Jahr)
Pull request description:
The `addnode` RPC with the `remove` command parameter is used to remove a node from the "added nodes". It did not have test coverage and in case of failure to remove the node it responded with the confusing message "Error: Node has not been added.".
This PR adds test coverage and introduces a new error code as well as changes the error message to something that makes sense.
ACKs for top commit:
laanwj:
Code review ACK a51d0ad2de89b9757d158df95ddeba2bfcb23935
theStack:
Tested ACK https://github.com/bitcoin/bitcoin/commit/a51d0ad2de
Tree-SHA512: 033ef5de0d4d49d58ef4df3759b838c9d19ee9dfb0aff9f814a3a63d124ca231a442c930efa7d343fe1f65727c4b59fc23dd5e26fe6ea69f9e84fda48b5c5cc2
ff22751417c6fbbd22f4eefd0e23431a83335c13 test: rm ascii art in rpc_fundrawtransaction (Jon Atack)
94fcc08541cf58bee864ab7c28a6c77e42472f17 test: add rpc_fundrawtransaction logging (Jon Atack)
Pull request description:
`test/functional/rpc_fundrawtransaction.py` is fairly slow to run and has no logging, so it can appear to be stalled.
This commit adds info logging at each test to provide feedback on the test run.
ACKs for top commit:
instagibbs:
utACK ff22751417
jnewbery:
tACK ff22751417c6fbbd22f4eefd0e23431a83335c13
Tree-SHA512: f4fabad8ef51c29981351bb4e66fb0c0e0517418a4a15892ef804df11d16b2d2ae1a1abc958d2b121819850278de90a2003b0edb8d7098d00360b89fa76e9062
f3f6dde56e Test coinbase category in wallet rpcs (andrewtoth)
e982f0b682 Add all category options to wallet rpc help (andrewtoth)
Pull request description:
The current helptext for `listtransactions`, `listsinceblock` and `gettransaction` only list two of the five possible options for `category`. This incorrectly implies that these are the only two options, and can cause problems if the other three options aren't accounted for. Also, some of the documentation is incorrect when specifying which options are returned for which categories.
This PR updates the helptext for these RPCs and adds a functional regression test for the cases when the other three categories are returned.
Tree-SHA512: 67dd7ff6269a3b0f17f5d1a61b0ae1fb1f3778f05e1c440bfbb9b3a005c9c6d740abcace20f3d597cf2bd6779c494448690f13fab0bd2340f206213bc7890b51
0dcac51049 wallet_keypool_topup.py: Test for all keypool address types (Gregory Sanders)
Pull request description:
To protect against regressions if key scanning is changed.
Tree-SHA512: d1c4bb033bafd97203a3f68fb262a501442be947907d67902f0391fbdec39c095196403c7675e602806cc68d7e2d1f552ab339a58346162379978d06dad1c4bb
