01013f5 Simplify tx validation tests (Pieter Wuille)
2dd6f80 Add a test that all flags are softforks (Pieter Wuille)
2851b77 Make all script verification flags softforks (Pieter Wuille)
Pull request description:
This change makes `SCRIPT_VERIFY_UPGRADABLE_NOPS` not apply to `OP_CHECKLOCKTIMEVERIFY` and `OP_CHECKSEQUENCEVERIFY`. This is a no-op as `UPGRADABLE_NOPS` is only set for mempool transactions, and those always have `SCRIPT_VERIFY_CHECKLOCKTIMEVERIFY` and `SCRIPT_VERIFY_CHECKSEQUENCEVERIFY` set as well. The advantage is that setting more flags now always results in a reduction in acceptable scripts (=softfork).
This results in a nice and testable property for validation, for which a new test is added.
This also means that the introduction of a new definition for a NOP or witness version will likely need the following procedure (example OP_NOP8 here)
* Remove OP_NOP8 from being affected by `SCRIPT_VERIFY_DISCOURAGE_UPGRADABLE_NOPS`.
* Add a `SCRIPT_VERIFY_DISCOURAGE_NOP8`, which only applies to `OP_NOP8`.
* Add a `SCRIPT_VERIFY_NOP8` which implements the new consensus logic.
* Before activation, add `SCRIPT_VERIFY_DISCOURAGE_NOP8` to the mempool flags.
* After activation, add `SCRIPT_VERIFY_NOP8` to both the mempool and consensus flags.
Tree-SHA512: d3b4538986ecf646aac9dba13a8d89318baf9e308e258547ca3b99e7c0509747f323edac6b1fea4e87e7d3c01b71193794b41679ae4f86f6e11ed6be3fd62c72
a3f5657 Add test cases covering the relevant key length boundaries: 64 bytes +/- 1 byte for HMAC-SHA256 and 128 bytes +/- 1 byte for HMAC-SHA512 (practicalswift)
Pull request description:
* Add test cases covering the relevant key length boundaries: 64 bytes +/- 1 byte for HMAC-SHA256 and 128 bytes +/- 1 byte for HMAC-SHA512.
* ~~Avoid creating a one-past-the-end pointer in the case of key length 64 (HMAC-SHA256) and key length 128 (HMAC-SHA512).~~
* ~~Avoid performing a noop memset call (zero length argument) in the case of key length 64 (HMAC-SHA256) and key length 128 (HMAC-SHA512).~~
Tree-SHA512: 48ff9ab79d41aab97b5b8f6496cc08a39955a07eb424f74ada6440d3b168b6204d3527fa677e175c47e40142f9d62c7456ae162e5a2f5b557e90fb353beef1d0
3121d76 doc: Update release notes for share/rpcauth/rpcauth.py rename (Henrik Jonsson)
3fdb297 Rename rpcuser.py to rpcauth.py (Henrik Jonsson)
Pull request description:
This script creates `rpcauth` entries for bitcoin.conf, not the deprecated `rpcuser` entry, so this changes the name of the script to match.
As discussed in #11830.
Tree-SHA512: cd71c2a4043ef1381d3810b057cc83be3fac612df576b91b683ef91fdb7998c534b3b97a3313845eb867dc4bf7cc42a1250474d2261ab3f9ed2f884ca8ebd9f4
be9f38c Do not make it trivial for inbound peers to generate log entries (Matt Corallo)
Pull request description:
Based on #11580 because I'm lazy.
We should generally avoid writing to debug.log unconditionally for
inbound peers which misbehave (the peer being about to be banned
being an exception, since they cannot do this twice).
Tree-SHA512: 8e59c8d08d00b1527951b30f4842d010a4c2fc440503ade112baa2c1b9afd0e0d1c5c2df83dde25183a242af45089cf9b9f873b71796771232ffb6c5fc6cc0cc
6697a70 add test for unconfirmed balance between restarts (Gregory Sanders)
6ba8f30 don't attempt mempool entry for wallet transactions on startup if already in mempool (Gregory Sanders)
Pull request description:
…eady in mempool
Mempool loads first, wallet second. Second attempt fails, marking that transaction !fInMempool. Those funds will disappear until confirmation is reached.
Tree-SHA512: 955f0565ec1dc1ba395e0b803a98c07b7cd00c8cac5ec618ed832fed259a856fb7bbbe41310cf6a4e43c0435e09b156109d2a4467d403811dc8379d2caebeede
de74c62 [Doc] Update bip.md, add support for BIP 159 (Jonas Schnelli)
e054d0e [QA] Add node_network_limited test (Jonas Schnelli)
bd09416 Avoid leaking the prune height through getdata (fingerprinting countermeasure) (Jonas Schnelli)
27df193 Always set NODE_NETWORK_LIMITED bit (Jonas Schnelli)
7caba38 Add NODE_NETWORK_LIMITED flags and min block amount constants (Jonas Schnelli)
Pull request description:
Extracted from #10387.
Does implement BIP159, but only the signalling part. No connections are made to NODE_NETWORK_LIMITED in this PR.
The address relay and connection work (the more complicated part) can then be separated (probably in #10387).
Tree-SHA512: e3218eb4789a9320b0f42dc10f62d30c13c49bdef00443fbe653bee22933477adcfc1cf8f6a95269324560b5721203ed41f3c5e2dd8a98ec2791f6a9d8346b1a
f05d349 gui: Fix proxy setting options dialog crash (Wladimir J. van der Laan)
Pull request description:
This fixes a crash bug when opening the options dialog.
- Check the return value of split() to avoid segmentation faults due to out of bounds when the user manages to enter invalid proxy settings. This is reported resonably often.
- Move the default proxy/port to a constant instead of hardcoding magic values.
- Factor out some common code.
- Revert #11448 because this proves a more robust replacement, it is no longer necessary and didn't generally solve the issue.
No attempt is made to do full sanity checking on the proxy, so it can still be rejected by the core with an InitError message.
Tree-SHA512: 72b700b7d6c4d3e3410f0c60e9e4facf93d7c6c1a1b6b23957c48b074a045970f518166952859d1ebca8620062cb70d222670a7310bbd6fe50550ec6d04417b5
fa4c16d qa: Add getrawtransaction in_active_chain=False test (MarcoFalke)
Pull request description:
#10275 accidentally forgot to add a test for `in_active_chain==False`.
This adds a test and also removes the special casing of `blockhash.IsNull()`, which makes no sense imo.
Tree-SHA512: 6c51295820b3dcd53b0b48020ab2b8c8f5864cd5061ddab2b35d35d643eb3e60ef95ff20c06c985a2e47f7080e82f27f3e00ee61c85dce627776d5ea6febee8f
This fixes a crash bug when opening the options dialog.
- Check the return value of split() to avoid segmentation faults due to
out of bounds when the user manages to enter invalid proxy settings.
This is reported resonably often.
- Move the default proxy/port to a constant instead of hardcoding magic
values.
- Factor out some common code.
- Revert #11448 because this proves a more robust replacement, it is no
longer necessary and didn't generally solve the issue.
No attempt is made to do full sanity checking on the proxy, so it can
still be rejected by the core with an InitError message.
529b866 Test datadir in conf file exists (MeshCollider)
Pull request description:
Provoked by Nick ODell's discovery here: https://bitcoin.stackexchange.com/questions/64189/when-running-bitcoind-i-keep-getting-boostfilesystemspace-operation-not-p/64210#64210
If a custom data directory is specified using `-datadir` argument, its existence is checked before the conf file is loaded. But if the conf file then specifies a different non-existent `datadir`, that isn't tested, and results in esoteric errors like:
EXCEPTION: N5boost10filesystem16filesystem_errorE
boost::filesystem::space: Operation not permitted
This just adds a check for the datadir existence at the end of `ReadConfigFile()`
Tree-SHA512: e488618c40aa356263f94040ae00aa4be98038abef66e8674b01032d22a5553a7fafcb8fe2d1f095865b39fb138c07b7a94415a00ef837573f92f95af065f712
434526a [test] Add tests for getrawtransaction with block hash. (Karl-Johan Alm)
b167951 [rpc] Allow getrawtransaction to take optional blockhash to fetch transaction from a block directly. (Karl-Johan Alm)
a5f5a2c [rpc] Fix fVerbose parsing (remove excess if cases). (Karl-Johan Alm)
Pull request description:
[Reviewer hint: use [?w=1](https://github.com/bitcoin/bitcoin/pull/10275/files?w=1) to avoid seeing a bunch of indentation changes.]
Presuming a user knows the block hash of the block containing a given transaction, this PR allows them to fetch the raw transaction, even without `-txindex`. It also enables support for getting transactions that are in orphaned blocks.
Note that supplying a block hash will override mempool and txindex support in `GetTransaction`. The rationale behind this is that a transaction may be in multiple places (orphaned blocks) and if the user supplies an explicit block hash it should be adhered to.
```Bash
$ # a41.. is a tx inside an orphan block ..3c6f.. -- first try getting it normally
$ ./bitcoin-cli getrawtransaction a41e66ee1341aa9fb9475b98cfdc1fe1261faa56c0a49254f33065ec90f7cd79 1
error code: -5
error message:
No such mempool transaction. Use -txindex to enable blockchain transaction queries. Use gettransaction for wallet transactions.
$ # now try with block hash
$ ./bitcoin-cli getrawtransaction a41e66ee1341aa9fb9475b98cfdc1fe1261faa56c0a49254f33065ec90f7cd79 1 0000000000000000003c6fe479122bfa4a9187493937af1734e1e5cd9f198ec7
{
"hex": "01000000014e7e81144e42f6d65550e59b715d470c9301fd7ac189[...]90488ac00000000",
"inMainChain": false,
"txid": "a41e66ee1341aa9fb9475b98cfdc1fe1261faa56c0a49254f33065ec90f7cd79",
"hash": "a41e66ee1341aa9fb9475b98cfdc1fe1261faa56c0a49254f33065ec90f7cd79",
"size": 225,
[...]
}
$ # another tx 6c66... in block 462000
$ ./bitcoin-cli getrawtransaction 6c66b98191e9d6cc671f6817142152ebf6c5cab2ef008397b5a71ac13255a735 1 00000000000000000217f2c12922e321f6d4aa933ce88005a9a493c503054a40
{
"hex": "0200000004d157[...]88acaf0c0700",
"inMainChain": true,
"txid": "6c66b98191e9d6cc671f6817142152ebf6c5cab2ef008397b5a71ac13255a735",
"hash": "6c66b98191e9d6cc671f6817142152ebf6c5cab2ef008397b5a71ac13255a735",
"size": 666,
[...]
}
$
```
Tree-SHA512: 279be3818141edd3cc194a9ee65929331920afb30297ab2d6da07293a2d7311afee5c8b00c6457477d9f1f86e86786a9b56878ea3ee19fa2629b829d042d0cda
6d2f277 rpcuser.py: Use 'python' not 'python2' (Henrik Jonsson)
Pull request description:
Note that `rpcuser.py` seems to handle either version when called explicitly like `python2 rpcuser.py` / `python3 rpcuser.py`. This change allows the user's `python` to be used to interpret the script.
There's not always a `python2` installed, e.g. if only Python 3.0+ is installed as `python` / `python3`, like on Arch Linux (https://github.com/hkjn/src/blob/master/bitcoin/Dockerfile#L14) but `python` is almost always present.
# Tested
Script is already compatible with both major versions:
```
$ python2 share/rpcuser/rpcuser.py foobar
String to be appended to bitcoin.conf:
rpcauth=foobar:2951d04c215769c8887c1fa4a8f712c$63c9a08e3b69f811e3837c0d5b6a355b7f798afc7094d80008f5c56a056c387f
Your password:
TV4I54T6W38v1sj3iF4Xsw7A-wYav-Cn8uTr8qv4xZ8=
$ python3 share/rpcuser/rpcuser.py foobar
String to be appended to bitcoin.conf:
rpcauth=foobar:129afbbd214c1f85fb6b9941402506f$4c5af73a2f3fd0a1d8232c28bc5c36f9b0cffd62b7b139beb328d089b16028dc
Your password:
qqbeWrGHqbYL1tUDh1wHKkejzxiGvOa3SPkDbbCwBfs=
$ python2 --version
Python 2.7.12
$ python3 --version
Python 3.5.2
```
Tree-SHA512: b5d6de15507cfd8dbb520325cf0b67fa471fa4fe3661de4ea6841fadb6ec9ba65d0c4f545f58578168c9ce9f6e483d613cce31ab3dd28117510bf9cada3b7b91
13a81b19d Add quotes to variable assignment (as requested by @TheBlueMatt) (practicalswift)
683b9d280 Fix valid path output (practicalswift)
193c2fb4c Use bash instead of POSIX sh. POSIX sh does not support arrays. (practicalswift)
80f5f28d3 Fix incorrect quoting of quotes (the previous quotes had no effect beyond unquoting) (practicalswift)
564a172df Add required space to [[ -n "$1" ]] (previously [[ -n"$1" ]]) (practicalswift)
1e44ae0e1 Add error handling: exit if cd fails (practicalswift)
b9e79ab41 Remove "\n" from echo argument. echo does not support escape sequences. (practicalswift)
f6b3382fa Remove unused variables (practicalswift)
Pull request description:
Shell script cleanups:
* Add required space to `[ -n ]`.
* Avoid quote within quote.
* Exit if `cd` fails.
* Remove `\n` which is not handled by `echo`.
* ~~Remove redundant `$` in arithmetic variable expression.~~
* ~~Use `$(command)` instead of legacy form `` `command` ``.~~
* Arrays are not supported in POSIX `sh`. Use `bash` when arrays are used.
* ~~`[ foo -a bar ]` is not well defined, use `[ foo ] && [ bar ]` instead.~~
* ~~`[ foo -o bar ]` is not well defined, use `[ foo ] || [ bar ]` instead.~~
Tree-SHA512: 80f6ded58bce625b15b4da30d69d2714c633e184e62b21ed67d2c58e2ebaa08b4147593324012694d02bf4f1f252844cdff2fd1cf5e817ddb07e2777db7a6390
5a7c09a test: Add tests for `-debuglogfile` with subdirs (Anthony Towns)
4158734 doc: Update release notes for `-debuglogfile` (Wladimir J. van der Laan)
2323242 test: Add test for `-debuglogfile` (Wladimir J. van der Laan)
cf5f432 Add `-debuglogfile` option (Wladimir J. van der Laan)
Pull request description:
This patch adds an option to configure the name and/or directory of the debug log file.
The user can specify either a relative path, in which case the path is relative to the (network specific) data directory. They can also specify an absolute path to put the log anywhere else in the file system.
Alternative to #11741 that gets rid of the concept of a "log directory" by specifying the path for the specific kind of log, the debug log. Which happens to be the only kind of log we have at this point*, but a hypothetical new kind of log (say, an audit log) would get a new option. This has more flexibility than specifying a directory which has to contain all of them.
\* excluding `db.log` which is internally generated by the wallet database library, but that one moves along with `-walletdir`.
Tree-SHA512: 4434d0e598dc23504e5c9e67fdbaef56db4f0fd490f9f54fd503e69d4dda9b5b69c539e1794ed841e72161b7b1dc3374d2f1193dd431b057566750e56fd8f24b
b4058ed Fix code constness in CBlockIndex::GetAncestor() overloads (Dan Raviv)
Pull request description:
Make the non-const overload of `CBlockIndex::GetAncestor()` reuse the const overload implementation instead of the other way around. This way, the constness of the const overload implementation is guaranteed. The other way around, it was possible to implement the non-const overload in a way which mutates the object, and since that implementation would be called even for const objects (due to the reuse), we would get undefined behavior.
Tree-SHA512: 545a8639bc52502ea06dbd924e8fabec6274fa69b43e3b8966a7987ce4dae6fb2498f623730fde7ed0e47478941c7f8baa2e76a12018134ff7c14c0dfa25ba3a
873beca6d [tests] Rename NodeConn and NodeConnCB (John Newbery)
Pull request description:
Final step in #11518
NodeConn -> P2PConnection
NodeConnCB -> P2PInterface
This is basically just a rename. Should be an easy review.
Tree-SHA512: fe1204b2b3d8182c5e324ffa7cb4099a47ef8536380e0bb9d37a5fccf76a24f548d1f1a7988ab8f830986a3058b670696de3fc891af5e5f75dbeb4e3273005d7
680bc2cbb Use range-based for loops (C++11) when looping over map elements (practicalswift)
Pull request description:
Before this commit:
```c++
for (std::map<T1, T2>::iterator x = y.begin(); x != y.end(); ++x) {
T1 z = (*x).first;
…
}
```
After this commit:
```c++
for (auto& x : y) {
T1 z = x.first;
…
}
```
Tree-SHA512: 954b136b7f5e6df09f39248a6b530fd9baa9ab59d7c2c7eb369fd4afbb591b7a52c92ee25f87f1745f47b41d6828b7abfd395b43daf84a55b4e6a3d45015e3a0
e4d0af4 Loop through the bip9 soft fork deployments instead of hard coding (Andrew Chow)
Pull request description:
Instead of hard coding which deployment statistics should be listed in the `getblockchaininfo` output, loop through the available deployments (except testdummy) when displaying their deployment info.
Tree-SHA512: 87e503bcf5e0fd379940d5e53320b9cbb4b47d647c66246d46f47c09a941f135e6ce1e8b75dad441ed4c22c3f41992dfde7717414be1d71c771d4ff8fe0e1936
ff8a9b0 [tests] Add combinedlogslen argument to test_runner.py (John Newbery)
dba94ea [tests] [travis-ci] Move Travis functional test log post processing to test_runner (John Newbery)
bba1c54 [tests] Improve logging shutdown and add hint for combine_logs (John Newbery)
Pull request description:
Replaces #11779 . Notes from that PR:
> Currently, when a functional test fails, the debug logs are printed sequentially to the travis log. This makes debugging race conditions based on the travis log hard. Instead, all logs events should be combined and sorted by their timestamp, then appended to the travis log.
@MarcoFalke
Tree-SHA512: 56c80067d6a2c92f7e6a35e3ae5160637a0de052d9da593c7be6e02233544a93c66d62456f903f85e2edc09e31ab4bdafd1aed1d9897ae48c634f82631f856f7
9b80fc1 Prefix leveldb debug logging (Wladimir J. van der Laan)
Pull request description:
Add leveldb: prefix to leveldb debug logging lines.
leveldb debug messages come in various scary flavors such as:
2017-11-30 08:26:31 leveldb: Recovering log #26
2017-11-30 08:26:31 leveldb: Level-0 table #28: started
2017-11-30 08:26:31 leveldb: Level-0 table #28: 597 bytes OK
2017-11-30 08:26:31 leveldb: Delete type=0 #26
2017-11-30 08:26:31 leveldb: Delete type=3 #24
so it's reasonably important to mark them as coming from leveldb internals and not from consensus validation wallet or such.
This is consistent with the `libevent:` prefix for libevent messages.
(this only affects `-debug=leveldb` or `-debug=1` otherwise you won't see them in the first place)
Tree-SHA512: 074eba00d39c6378b9e14d03aa2c551b4e3fc7bffdd5a1a0ba2498b44bcc77071d47735be09493286056053f0cca625c5cbaad7ad1ddb9d902d30e7cd316d9d2
This patch adds an option to configure the name and/or directory of the
debug log.
The user can specify either a relative path, in which case the path
is relative to the data directory. They can also specify an absolute
path to put the log anywhere else in the file system.
