4d14d06fc docs: clarified systemd installation instructions in init.md for Ubuntu users. (DaveFromBinary)
Pull request description:
Added a note to init.md to clarify the .service copy path for Ubuntu because it differs from the described copy path.
Also noted which version of Ubuntu switched to systemd for the default system init to clarify when the systemd installation steps should be used instead of the upstart installation steps for Ubuntu users.
Tree-SHA512: 1ac6143a177d0f3782ff641029d71eb1f3b3be0c1482e266154d3ca093251b58a10a5f037d1cc82dbfaeae058df2bb8e904833ccb88b032f1a59a151724f95e2
c8edc2c [docs] initial QT documentation, move Qt Creator instructions (Sjors Provoost)
Pull request description:
I'll update this as I figure out how everything is tied together, but I think it's a useful enough start.
Tree-SHA512: d96e5c9ba8ccc3a1b92a0894a8a8449317100eebb14e5d390b51793534458f50eac296cf2945fccf81b85aff23fa32d91d6015a0a76ada4f7091a400d7508ae5
161e8d40a4e4c0e701b6c8142b8dcacf2190545e RPC: Add new getzmqnotifications method. (Daniel Kraft)
caac39b0ace38aa088d88c1a5a9a9dbb4d2e893f Make ZMQ notification interface instance global. (Daniel Kraft)
Pull request description:
This adds a new RPC method `getzmqnotifications`, which returns information about all active ZMQ notification endpoints. This is useful for software that layers on top of bitcoind, so it can verify that ZeroMQ is enabled and also figure out where it should listen.
See #13526.
Tree-SHA512: edce722925741c84ddbf7b3a879fc9db1907e5269d0d97138fe724035d93ee541c2118c24fa92f4197403f380d0e25c2fda5ca6c62d526792ea749cf527a99a0
e3245f2e7b Removes Boost predicate.hpp dependency (251)
Pull request description:
This pull request removes the `boost/algorithm/string/predicate.hpp` dependency from the project.
To replace the the `predicate.hpp` dependency from the project the function calls to `boost::algorithm::starts_with` and `boost::algorithm::ends_with` have been replaced with respectively C++11's `std::basic_string::front` and `std::basic_string::back` function calls.
Refactors that were not required, but have been done anyways:
- The Boost function `all` was implicitly made available via the `predicate.hpp` header. Instead of including the appropriate header, function calls to `all` have been replaced with function calls to `std::all_of`.
- The `boost::algorithm::is_digit` predicate has been replaced with a custom `IsDigit` function that is locale independent and ASCII deterministic.
Tree-SHA512: 22dda6adfb4d7ac0cabac8cc33e8fb8330c899805acc1ae4ede402c4b11ea75a399414b389dfaa3650d23b47f41351b4650077af9005d598fbe48d5277bdc320
669c943 Avoid leaking prioritization information when relaying transactions (Suhas Daftuar)
e868b22 fee estimator: avoid sorting mempool on shutdown (Suhas Daftuar)
0975406 Correct mempool mapTx comment (Suhas Daftuar)
Pull request description:
Following up on #12127 and #12118, this cleans up a comment that was left incorrect in txmempool.h, and addresses a couple of the observations @TheBlueMatt made about an unnecessary use of `queryHashes()` and a small information leak when prioritizing transactions.
Left undone is nuking queryHashes altogether; that would require changing the behavior of the `getrawmempool` rpc call, which I think I might be in favor of doing, but wanted to save for its own PR.
Tree-SHA512: c97d10b96dcd6520459287a4a2eda92774173757695100fcfe61e526aef86f394507c331d17f9e0c14b496c33ec46198a0f165a847762ca50f7c6780b993f162
* Add spork to change max mixing participants to 20
Signed-off-by: pasta <pasta@dashboost.org>
* Also change min participants on devnet/testnet
Signed-off-by: pasta <pasta@dashboost.org>
* adjust formatting
Signed-off-by: pasta <pasta@dashboost.org>
* add nPoolNewMinParticipants under regtest
Signed-off-by: pasta <pasta@dashboost.org>
* Merge #11796: [tests] Functional test naming convention
5fecd84 [tests] Remove redundant import in blocktools.py test (Anthony Towns)
9b20bb4 [tests] Check tests conform to naming convention (Anthony Towns)
7250b4e [tests] README.md nit fixes (Anthony Towns)
82b2712 [tests] move witness util functions to blocktools.py (John Newbery)
1e10854 [tests] [docs] update README for new test naming scheme (John Newbery)
Pull request description:
Splitting #11774 into two parts -- this part updates the README with the proposed naming convention, and adds some checks to test_runner.py that the number of tests violating the naming convention doesn't increase too much. Idea is this part of the change should not introduce merge conflicts or require much rebasing, so reviews of the complicated bits won't become invalidated too often; while the second part will just be file renames, which will require regular rebasing and will introduce merge conflicts with pending PRs, but can be merged later, and should also be much easier to review, since it will only include relatively trivial changes.
Tree-SHA512: b96557d41714addbbfe2aed62fb5a48639eaeb1eb3aba30ac1b3a86bb3cb8d796c6247f9c414c4695c4bf54c0ec9968ac88e2f88fb62483bc1a2f89368f7fc80
* update violation count
Signed-off-by: pasta <pasta@dashboost.org>
* Merge #11774: [tests] Rename functional tests
6f881cc880 [tests] Remove EXPECTED_VIOLATION_COUNT (Anthony Towns)
3150b3fea7 [tests] Rename misc functional tests. (Anthony Towns)
81b79f2c39 [tests] Rename rpc_* functional tests. (Anthony Towns)
61b8f7f273 [tests] Rename p2p_* functional tests. (Anthony Towns)
90600bc7db [tests] Rename wallet_* functional tests. (Anthony Towns)
ca6523d0c8 [tests] Rename feature_* functional tests. (Anthony Towns)
Pull request description:
This PR changes the functional tests to have a consistent naming scheme:
tests for individual RPC methods are named rpc_...
tests for interfaces (REST, ZMQ, RPC features) are named interface_...
tests that explicitly test the p2p interface are named p2p_...
tests for wallet features are named wallet_...
tests for mining features are named mining_...
tests for mempool behaviour are named mempool_...
tests for full features that aren't wallet/mining/mempool are named feature_...
Rationale: it's sometimes difficult for new contributors to know what's already covered by existing tests and where new tests should be added. Naming in a consistent fashion makes it easier to see what's already covered at a glance.
Tree-SHA512: 4246790552d42bbd95f6d5bdf67702b81b3b2c583ce7eaf1fe6d8e254721279b47315973c6e9ae82dad6e4c747f12188160764bf2624c0f8f3b4d39330ec8b16
* rename tests and edit associated strings to align test-suite with test name standards
Signed-off-by: pasta <pasta@dashboost.org>
* fix grammar in test/functional/test_runner.py
Co-authored-by: dustinface <35775977+xdustinface@users.noreply.github.com>
* ci: Fix excluded test names
* rename feature_privatesend.py to rpc_privatesend.py
Signed-off-by: pasta <pasta@dashboost.org>
Co-authored-by: Wladimir J. van der Laan <laanwj@gmail.com>
Co-authored-by: MarcoFalke <falke.marco@gmail.com>
Co-authored-by: dustinface <35775977+xdustinface@users.noreply.github.com>
Co-authored-by: xdustinface <xdustinfacex@gmail.com>
* qt: User border-image in place of image
For some reason image produced weird outputs on some resolution screens.
* qt: Fix layout issues in TransactionView
* qt: Fix layout issues in OverviewPage
* qt: Replace transparent with #00000000 in stylesheets
* qt: Use #a84832 as red where possible.
This includes css files and any color usage in code.
* qt: Finetune QPushButton style
* qt: Customized QSlider (used in the Debug window -> NetworkTraffic)
* qt: Finetune QToolbar style
* qt: Customized QProgressBar
* qt: Customized QCalendarWidget
* qt: Finetune QStatusBar style
- Give the progress label a name as css reference
- Set min height and margins
* qt: Finetune QMenu style
- Set a light rounded border
- Color for disabled items
- Color/Style for seperator
- Give the items padding
* qt: Customized QGroupBox
* qt: Customized QToolTip
* qt: Give inputs widgets a proper hover/focus/selected/disabled style
* qt: Finetune SendCoinsDialog
- Add light line below the coincontrol frame
- Add light line above fee frame
- Increase header font size
- Remove button layout changes of CoinControl button
- Fix Layout/Alignment of balance labels
* qt: Customized RPC console's autocompletition popup
* qt: Add stylesheets to Intro
This is the datadir selection dialog.
* qt: OptionsDialog - Give the reset button the "light button" style
* qt: Finetune shared styles in general.css
* qt: Finetune coloring in dark.css
* qt: Finetune coloring in light.css
* More fixes for traditional.css
No text colors, s/transparent/#00000000/
* qt: Run update-css-files.py
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
Having "const char*" leads to undefined behaviour if the "const char*"
is deallocated before the thread used it.
Co-Authored-By: UdjinM6 <UdjinM6@users.noreply.github.com>
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* qt: Set parents properly to inherit css and remove redundant loading
The stylesheet is inherited from the parent so its enough to set it for the main window and use this as parent for all other windows.
Except for the ShutdownDialog. This needs to have its own stylesheet set because we can't have the main window as parent of the ShutdownDialog.
* qt: Adding Qt::Window flag to the constructor of RPCConsole
This is required now as RPCConsole does not longer show as extra window with a parent set (For stylesheet inheritance).
* qt: Add UI debug mode (-debug-ui)
If this mode is enabled the content of the css files will become pushed to the UI if there were any changes made to the stylesheet files in the custom css directory. It also forces some UI elements to show up which are actually only shown under special conditions (e.g. watch balance labels). Its required to set a custom css directory with -custom-css-dir to enable this.
* qt: Adjust the description of -debug-ui
* qt: Update theme colors in GUIUtil
- Adds ThemedColor::GREEN
- Changes ThemedColor::NEGATIVE to ThemedColor::RED
- Color adjustments to align with css colors
* qt: Give links a more eye friendly blue
* qt: Use themed colors in net traffic graph
* qt: Use themed styles/color in overview page
* qt: Use themed stylesheets in Intro
* qt: Modified QR code image painting to match the theme colors
* qt: OptionsDialog - Replaced QTabBar with QStackedWidget
This allows to stretch the buttons in the dialog window.
* qt: RPCConsole - Replaced QTabBar with QStackedWidget
This allows to stretch the buttons in the dialog window.
* qt: SignVerifyMessageDialog - Replaced QTabBar with QStackedWidget
This allows to stretch the buttons in the dialog window.
* qt: Add styles for tabbar replacement buttons
This indicates a previous crash where the TX made it into the txindex but
the block was not flushed to disk. When dashd is restarted then, there is
a short time where GetTransaction would return a non-existant block, while
callers very often assume that the returned block hash is known.
* test: Add --timeoutscale to the test framework
Allows to scale the test timeouts by multiplying them with the value provided
with --timeoutscale. This is mostly meant to be used by CI where time
seems to be rare from time to time.
Co-Authored-By: UdjinM6 <UdjinM6@users.noreply.github.com>
* test: Use wait_until in llmq-signing.py
This is to let it using the same wait code as the other tests.
Also this change makes sure --timeoutscale gets applied to the wait
conditions in this test too.
Co-authored-by: UdjinM6 <UdjinM6@users.noreply.github.com>
* qt: Change themes path from ":themes" to ":css"
Required for the introduction of a custom css directory which will
happen with the follow-up commits.
* qt: Renamed trad.css to traditional.css
* qt: Add -custom-css-dir startup parameter
This allows to load a custom directory as css directory.
The custom directory currently needs to have the files:
- general.css
- dark.css
- light.css
- traditional.css
- scrollbars.css
e87fefc test: Add rpc_bind test to default-run tests (Wladimir J. van der Laan)
Pull request description:
Skip the parts that cannot be run on the host due to lack of IPv6 support or a second interface to bind on, and warn appropriately.
Without no strong requirements (besides being Linux only, which will skip the test) left, add this test to the default in test_runner.
~~(the non-IPv6 parts of the two dual-IPv4/6 tests could also be enabled, but first going to look what Travis does here to see if there wasn't another reason it was disabled)~~ done, it only makes sense for the first
Tree-SHA512: 724259b14f59dccc7e61ef071359336adb0f76a63db392b6ce6940e21c8ee0470c35374e82970681261685ef299cd70b0c1372598cea85d341f64c2c40ea28ee
728667b771 scripted-diff: rename TestNode to TestP2PConn in tests (John Newbery)
Pull request description:
Several test scripts define a subclass of P2PInterface called TestNode.
This commit renames those to TestP2PConn since we already have a
TestNode class in the test framework.
Tree-SHA512: fc8472677312ad000560fa491b680a441d05c0fee5f8eea2d031d326d81e56d231c235930c0d09dd10afc98d7255fa9f9309d5e2ae6c252bc188a5951644a5b8
b156ff7c3 [tests] bind functional test nodes to 127.0.0.1 (Sjors Provoost)
Pull request description:
Replaces #12200 which broke `rpc_bind.py`.
Prevents OSX firewall allow-this-application-to-accept-inbound-connections permission popups and is generally safer.
To prevent binding to `127.0.0.1`, set `self.bind_to_localhost_only = False`.
cc @jnewbery
Tree-SHA512: 5e700124c91bd0cbdee83ca44910071d71d61d8842334755b685d14fbff6454d75de1ea7de67340370386f58b41361e80e90bb4dca5c4d5992f9d2b27985f999
f95989b3ed Fix AreInputsStandard test to reference the proper scriptPubKey (Ben Woosley)
Pull request description:
This value doesn't affect the outcome of the test, because the values are
properly set on line 351 (https://github.com/bitcoin/bitcoin/pull/13565/files#diff-b7061098b41bd31ef5db043705441133R351), but this makes the test values internally coherent.
Tree-SHA512: 5a5fda843475abd91f6c366315536d3573e70420d7c6abeebd74a54939d4de774c33faad4560d1fd4b2c35006224d9e7b3a8c925fe9926013586fd1f7aa886cc
dae0d13bbb710346a8f4c8ecdf96937283e470df RPCAuth Detection in Logs (Linrono)
Pull request description:
This adds a log entry for when RPCAuth is detected.
This keeps everything working as it currently is. I suppose it could be added as a nested if to also stop the creation of the cookie file if this would be wanted.
Tree-SHA512: 61a893b2e06ae5e7db2ddedc63819d34047fad0df764184b1b2b3f49016581e6bbf2c94a59374ca2c300190cd4e827f01da286aad5a4cc8fe5140e258b1cf8c4
fa324a8b15a4ef4138685b3427c895ec14faf3af doc: Rewrite some validation doc as lock annotations (MarcoFalke)
Pull request description:
#13402 added some lock annotations in comments. This pull removes them and adds clang-readable locking annotations instead.
Tree-SHA512: 2d392efa8ac4978830a9df08b2009e69d6f1ac031f62be2275ae8d7c7e483331c7f8d458d865443af907a7af27a592421c6cca6b2df3f2877e0f369b9198f383
4b6ab02122d225818f6c6a4b4ef343d2c90e6d55 Remove unused argument to ProcessGetBlockData(...) (practicalswift)
c469ecf22e8ab55acf2cf8fc6fcf34415b541f76 net: Remove unused interrupt from SendMessages (fanquake)
Pull request description:
Discussed very briefly with cfields.
Includes 65b4400 from #13554 as it's a similar refactor.
Tree-SHA512: 45cd64208a5c8164242db74e6687e9344ea592bab5e7f9ba8e1bb449057fc908ec9d8b8523748a68426e4a4304e3388a138cd834698b39837b2149b72beefdc9
1fc605a8ae fix bench/prevector.cpp (Akio Nakamura)
Pull request description:
This patch intends to fix some incorrect action of bench/prevector.cpp.
1. PrevectorClear()
2nd call of ```clear()``` should to operate t1 instead of t0.
This patch changes t0 to t1.
2. PREVECTOR_TEST()
PREVECTOR_TEST macro should to call both
```PrevectorXX<nontrivial_t>(state)``` and ```PrevectorXX<trivial_t>(state)```
by specific ```"name"``` which given by parameter instead of calling
```PrevectorResize<>()``` regardless of ```"name"```.
This patch changes ```"PrevectorResize<"``` of this macro to
```"Prevector ## name<"```.
Tree-SHA512: d0498c6d627d7e96fc8ccfb329ca0be2641535b1ce1923d9b1fc720825f9bf4d7281dc8d5ae929038e37b3e625189af9807cb62e6d20933d73832a6dff4b5596
98b181323 [build] Tune wildcards for LIBSECP256K1 target (Karl-Johan Alm)
Pull request description:
Automake would think the target was out of date every time because e.g. '.deps' was updated.
Note: I am assuming that secp256k1 depends on `*.h`, `*.c`, ~~and `libsecp256k1-config.h`~~ (it's `.h` so already included), aside from pre-existing `include/*`. If there are other files that would require a rebuild of the `LIBSECP256K1` target, they should probably be added.
It would be neat if you could exclude specific files, rather than split it up like this, but it doesn't seem possible (https://www.gnu.org/software/make/manual/html_node/Wildcard-Function.html#Wildcard-Function)
Should probably note this:
```Bash
$ V=1 make check VERBOSE=1
Making check in src
make[1]: Entering directory '/home/user/workspace/bitcoin/src'
make[2]: Entering directory '/home/user/workspace/bitcoin/src'
make -C secp256k1 libsecp256k1.la
make[3]: Entering directory '/home/user/workspace/bitcoin/src/secp256k1'
make[3]: 'libsecp256k1.la' is up to date.
make[3]: Leaving directory '/home/user/workspace/bitcoin/src/secp256k1'
make check-TESTS check-local
make[3]: Entering directory '/home/user/workspace/bitcoin/src'
make[4]: Entering directory '/home/user/workspace/bitcoin/src'
make -C secp256k1 libsecp256k1.la
make[5]: Entering directory '/home/user/workspace/bitcoin/src/secp256k1'
make[5]: 'libsecp256k1.la' is up to date.
make[5]: Leaving directory '/home/user/workspace/bitcoin/src/secp256k1'
PASS: test/test_bitcoin.exe
```
Tree-SHA512: 62b133c76e882788dae0c14208a9f5acdbd731c2e7a248f9e01f488b8ec13f9d637d7ad0d63e18d324bb4e088f1836a936649b0fb97bee679eaadedbeed5c981
2dcd7b4ec logging: avoid nStart may be used uninitialized in AppInitMain warning (mruddy)
Pull request description:
Was getting the following compiler warning:
```
init.cpp: In function ‘bool AppInitMain()’:
init.cpp:1616:60: warning: ‘nStart’ may be used uninitialized in this function [-Wmaybe-uninitialized]
LogPrintf(" block index %15dms\n", GetTimeMillis() - nStart);
```
It's ok without this PR, but this PR renames `nStart` to `load_block_index_start_time`, makes it `const`, and also reduces the scope of the variable.
The logging line is moved such that the the time spent will be logged even if a shutdown is requested while the index is being loaded.
Having the log message output even when a shutdown is requested may be how this was intended to work before anyways. That could explain the leading space, as such a log message now looks like:
```
2018-06-30T11:34:05Z [0%]...[16%]...[33%]...[50%]... block index 25750ms
2018-06-30T11:34:17Z Shutdown requested. Exiting.
```
Tree-SHA512: 967048afbc31f2ce8f80ae7d33fee0bdcbe94550cf2b5b662087e2a7cff14a8bf43d909b30f930660c184ec6c3c7e1302a84e3e54fc1723f7412827f4bf2c518
49d1f4cdd Detect if char equals int8_t (Chun Kuan Lee)
Pull request description:
Probably fixes#13576. I'm not able to test this. @stacepellegrino, can you test this?
Tree-SHA512: b750e00e11e6b6f6341fec668ec2254cc101c8ebdd4878f320d6cb3b07cf326761146e4ceff0b6405b7e503ff64c093a8274bd524a097e2c49382dc296972c4f
b330c3001 Docs: Improve doc of options addnode, connect, seednode (wodry)
Pull request description:
Just clarify that options `addnode`, `connect` and `seednode` can be specified multiple times.
Tree-SHA512: ed149cabe7fc1d40f2fb6ad8b643656e0ec49cfae1834c157c89170eac1241efa3c5683d97266ff921f5229f28d732c9f7ee030e7902d9a79db1e0c8716fa3db
747ee89b4 Docs: Modify policy to not translate command-line help (Chun Kuan Lee)
Pull request description:
After #13341, command-line helps would no longer be translated.
Tree-SHA512: 73e7a7545b316cc6ec07f2527cc0e63c922d8e382abd779638583d55a4ee0f3b26ecc9d63f51da8bab2eda9829ec5d1b3162a1115c78a1add2621ba2ccdb839e
f618ebc4e4 validation: count blocks correctly for check level < 3 (Karl-Johan Alm)
Pull request description:
As noted in https://github.com/bitcoin/bitcoin/pull/13428#issuecomment-396129295 there is a bug where if check level < 3, the resulting count for blocks is wrong, because `pindexState` is never updated.
Post-commit `./bitcoin-cli verifychain 1 3`:
```
2018-06-11T07:12:28Z Verifying last 3 blocks at level 1
2018-06-11T07:12:28Z [0%]...[33%]...[66%]...[99%]...[DONE].
2018-06-11T07:12:28Z No coin database inconsistencies in last 3 blocks (0 transactions)
```
Pre-commit `./bitcoin-cli verifychain 1 3`:
```
2018-06-11T07:13:34Z Verifying last 3 blocks at level 1
2018-06-11T07:13:34Z [0%]...[33%]...[66%]...[99%]...[DONE].
2018-06-11T07:13:34Z No coin database inconsistencies in last 0 blocks (0 transactions)
```
Tree-SHA512: 3d82ed26665162c9615fb0e6e91a46ed4d229a5e6797c6c420e6b0bf1be6e5e02401c6e9a93b7a5aec503a2650d8c20d1b45fe300a922379e4cef8ee26e18d96
ea49e06c82 tests: Fix incorrect documentation for test case cuckoocache_hit_rate_ok (practicalswift)
Pull request description:
Fix incorrect documentation for test case `cuckoocache_hit_rate_ok`.
Tree-SHA512: 2c1138953f077666c0bba784d9f5e5a627403dcd8b81851ca74793f1bf7bb5dc274af7887d51edb6669de1e9354ca7e5dfba80a3ce62f16eaaee6c6fa57b79f5
…listunspent
fa103a5 [qa] wallet_basic: Specify minimum required amount for listunspent (MarcoFalke)
Pull request description:
A value less than that would fail the tests later on anyway:
```
File "./test/functional/wallet_basic.py", line 250, in run_test
self.nodes[1].sendrawtransaction(signed_raw_tx['hex'])
test_framework.authproxy.JSONRPCException: bad-txns-in-belowout, value in (1.00) < value out (49.998) (code 16) (-26)
Tree-SHA512: 7e72ad02b5623bc078610da06c34721836822a920a4e85b12a1e0f339e3205cdc11d39763197770e649fb73376f922ff91a8f244b465195e50a6798658e04f80
Signed-off-by: pasta <pasta@dashboost.org>
9fdf05d70c tests: Fix lock-order-inversion (potential deadlock) in DoS_tests. Reported by TSAN. (practicalswift)
Pull request description:
Fix lock-order-inversion (potential deadlock) in `DoS_tests`. Reported by Clang's TSAN.
Makes `src/test/test_bitcoin` pass also when compiled with TreadSanitizer (`./configure --with-sanitizers=thread` with `clang`).
Tree-SHA512: 41403bb7b6e26bdf1b830b5699e27c637d522bae1799d2a19ed4b68b21b2555438b42170d8b1189613beb32a69b76a65175d29a83f5f4e493896c3d0d94ae26d
