e065249 Add unit test for outbound peer eviction (Suhas Daftuar)
5a6d00c Permit disconnection of outbound peers on bad/slow chains (Suhas Daftuar)
c60fd71 Disconnecting from bad outbound peers in IBD (Suhas Daftuar)
Pull request description:
The first commit will disconnect an outbound peer that serves us a headers chain with insufficient work while we're in IBD.
The second commit introduces a way to disconnect outbound peers whose chains fall out of sync with ours:
For a given outbound peer, we check whether their best known block (which is known from the blocks they announce to us) has at least as much work as our tip. If it doesn't, we set a 20 minute timeout, and if we still haven't heard about a block with as much work as our tip had when we set the timeout, then we send a single getheaders message, and wait 2 more minutes. If after two minutes their best known block has insufficient work, we disconnect that peer.
We protect 4 of our outbound peers (who provide some "good" headers chains, ie a chain with at least as much work as our tip at some point) from being subject to this logic, to prevent excessive network topology changes as a result of this algorithm, while still ensuring that we have a reasonable number of nodes not known to be on bogus chains.
We also don't require our peers to be on the same chain as us, to prevent accidental partitioning of the network in the event of a chain split. Note that if our peers are ever on a more work chain than our tip, then we will download and validate it, and then either reorg to it, or learn of a consensus incompatibility with that peer and disconnect. This PR is designed to protect against peers that are on a less work chain which we may never try to download and validate.
Tree-SHA512: 2e0169a1dd8a7fb95980573ac4a201924bffdd724c19afcab5efcef076fdbe1f2cec7dc5f5d7e0a6327216f56d3828884f73642e00c8534b56ec2bb4c854a656
Currently we have no rotation of outbound peers. If an outbound peer
stops serving us blocks, or is on a consensus-incompatible chain with
less work than our tip (but otherwise valid headers), then we will never
disconnect that peer, even though that peer is using one of our 8
outbound connection slots. Because we rely on our outbound peers to
find an honest node in order to reach consensus, allowing an
incompatible peer to occupy one of those slots is undesirable,
particularly if it is possible for all such slots to be occupied by such
peers.
Protect against this by always checking to see if a peer's best known
block has less work than our tip, and if so, set a 20 minute timeout --
if the peer is still not known to have caught up to a chain with as much
work as ours after 20 minutes, then send a single getheaders message,
wait 2 more minutes, and if a better header hasn't been received by then,
disconnect that peer.
Note:
- we do not require that our peer sync to the same tip as ours, just an
equal or greater work tip. (Doing otherwise would risk partitioning the
network in the event of a chain split, and is also unnecessary.)
- we pick 4 of our outbound peers and do not subject them to this logic,
to be more conservative. We don't wish to permit temporary network
issues (or an attacker) to excessively disrupt network topology.
Change suggested by Cory Fields <cory-nospam-@coryfields.com> who noticed
listsinceblock would ignore invalid block hashes causing it to return a
completely unfiltered list of transactions.
6b1891e2c Add Sent and Received information to the debug menu peer list (Aaron Golliver)
8e4aa35ff move human-readable byte formatting to guiutil (Aaron Golliver)
Pull request description:
Makes the peer list display how much you've uploaded/downloaded from each peer.
Here's a screenshot ~~[outdated](https://i.imgur.com/MhPbItp.png)~~, [current](https://i.imgur.com/K1htrVv.png) of how it looks. You can now sort to see who are the peers you've uploaded the most too.
I also moved `RPCConsole::FormatBytes` to `guiutil::formatBytes` so I could use it in the peerlist
Tree-SHA512: 8845ef406e4cbe7f981879a78c063542ce90f50f45c8fa3514ba3e6e1164b4c70bb2093c4e1cac268aef0328b7b63545bc1dfa435c227f28fdb4cb0a596800f5
A peer could try to waste our resources by sending us unrequested blocks with
low work, eg to fill up our disk. Since
e2652002b6 we no longer request blocks until we
know we're on a chain with more than nMinimumChainWork (our anti-DoS
threshold), but we would still process unrequested blocks that had more work
than our tip. This commit fixes that behavior.
7a5f930 Avoid slow transaction search with txindex enabled (João Barbosa)
Pull request description:
This is an alternative to #11507 where a slow search is not attempted (in any case) if `txindex` is enabled.
Tree-SHA512: e680621781a9241c0513ddd79d23b0b42f3ccec8a63ed1c926b35c43321c81c39a1028770397dd5070501dcf644d897026a2bd68a161a4b435f19227c1bbca48
Make sure wallet databases have unique fileids. If they don't, throw an error.
BDB caches do not work properly when more than one open database has the same
fileid, because values written to one database may show up in reads to other
databases.
Bitcoin will never create different databases with the same fileid, but users
can create them by manually copying database files.
BDB caching bug was reported by Chris Moore <dooglus@gmail.com>
https://github.com/bitcoin/bitcoin/issues/11429Fixes#11429
0aacfa4 Remove accidental stray semicolon (practicalswift)
68feb49 Use nullptr instead of NULL (practicalswift)
c6b07fd Fix a vs. an typo (practicalswift)
Pull request description:
Minor cleanups:
* Typo: Fix a vs. an typo
* Typo: Remove accidental stray semicolon (only remaining instance in repo)
* Correctness/consistency: Use `nullptr` instead of `NULL` (only remaining instance in repo)
Tree-SHA512: 47142e557da9d3fa0b532c46edeb7f356a1f6dc5973e60b0e496badff3581ff696eade542d49da777ac7f2e895129cc8487ccdb1984ff828434fa86f9a56dad0
f4c4e38 [trivial] Make namespace explicit for is_regular_file (John Newbery)
Pull request description:
is_regular_file resolves using argument dependent lookup. Make the
namespace explicit so it's obvious where the function is defined.
For those not familiar with argument dependent lookups:
- http://en.cppreference.com/w/cpp/language/adl
- https://en.wikipedia.org/wiki/Argument-dependent_name_lookup
Thanks to C++ guru @ryanofsky for pointing this out to me.
Tree-SHA512: 919f1818081a8f90c5751181f87e13b06d90f8aec0ab873100434e55c85cca6e0e288ecc7f135e19e9b5dba7952e96b6393864b7840e20b69dd40e92a157928b
7104de8 [wallet] Fix leak in CDB constructor (João Barbosa)
Pull request description:
First commit fixes a minor leak.
Second commit improves the constructor in the failure cases.
Tree-SHA512: 5165413d60ed9fc28203c9fe128adbba03a9ea9e9aa3734d9ea2522dafd815ba0fb8b90fd0809dbc06eb3ad360e7764de01dadf653ade3350fe86f6b8f04bc90
207408b Fix crash via division by zero assertion (Jonas Schnelli)
Pull request description:
Replaces the newly added `assert` for a devision by zero protection by a control structure. Floating point division by zero is defined by the floating point standard and results in +inf or -inf.
Introduced in #11133
Reported by @mzhou, fixes#11501
Tree-SHA512: ac9b4efa3ba52a2aa246fb11170128c4aaf829fd491b649524c85069c6ed33ae612e761809aea9d9a44bdea29a417b3f3a558226495094b5070a42a56b2ac77e
258d33b41 [mempool] Mark unaccepted txs present in mempool as 'already there'. (Karl-Johan Alm)
Pull request description:
I was investigating the reasons for failed imports in mempool and noticed that `LoadMempool()` and `pwallet->postInitProcess()` (for all wallets) are executed concurrently. The wallet will end up importing transactions that `LoadMempool()` later tries to import; the latter will fail due to the tx already being in the mempool.
This PR changes the log message, adding an additional "already there" entry. For transactions not accepted into mempool, a check if they are in the mempool is done first, and if found, they are counted as 'already there', otherwise counted as 'failed'.
Also slight rewording for consistency (successes, failed, expired, ... -> succeeded, failed, expired).
Tree-SHA512: 1a6134a25260917f2768365e0dfd8b278fe3f8287cab38bb028b7de3d517718a2d37696186dc7a23ceab338cc755fbbe7d45358ee94e573610fddd2a0620d6e5
43f76f6ac Add missing comma from rescanblockchain (MeshCollider)
Pull request description:
#7061 forgot a comma in the HelpExampleRpc() for the rescanblockchain RPC, giving an incorrect example command output:
> curl --user myusername --data-binary '{"jsonrpc": "1.0", "id":"curltest", "method": "rescanblockchain", "params": [100000 120000] }' -H 'content-type: text/plain;' http://127.0.0.1:8332/
Was just missed during nit-fixing. This is a trivial fix to add that comma in.
Tree-SHA512: b808f32674af585a1ddb78b25621dff0387dbad79c97d65ff61d8a9a12a94e4b8ecf03eda3f281fe439bddb6c0703c39104dbb279f1718949abd930faaa9042f
fe862c5ad Avoid division by zero in the case of a corrupt estimates file (practicalswift)
Pull request description:
Avoid division by zero in the case of a corrupt estimates file.
Tree-SHA512: 285cb0d566f239d260880026a930a7412d86e31ea3819d5371a36364a241dc76164e68c1da6da8369345fa6037ca0abc5ab82d245058c085d5f1fd50111fba48
Now using a std::unique_ptr, the Db instance is correctly released
when CDB initialization fails.
The internal CDB state and mapFileUseCount are only mutated when
the CDB initialization succeeds.
15f5d3b17 Switch DNSSeed-needed metric to any-automatic-nodes, not services (Matt Corallo)
5ee88b4bd Clarify docs for requirements/handling of addnode/connect nodes (Matt Corallo)
57edc0b0c Rename fAddnode to a more-descriptive "manual_connection" (Matt Corallo)
44407100f Replace relevant services logic with a function suite. (Matt Corallo)
Pull request description:
This was mostly written as a way to clean things up so that the NETWORK_LIMITED PR (#10387) can be simplified a ton, but its also a nice standalone cleanup that will also require a bit of review because it tweaks a lot of stuff across net. The new functions are fine in protocol.h right now since they're straight-forward, but after NETWORK_LIMITED will really want to move elsewhere after @theuni moves the nServices-based selection to addrman from connman.
Adds HasAllRelevantServices and GetRelevantServices, which check
for NETWORK|WITNESS.
This changes the following:
* Removes nRelevantServices from CConnman, disconnecting it a bit
more from protocol-level logic.
* Replaces our sometimes-connect-to-!WITNESS-nodes logic with
simply always requiring WITNESS|NETWORK for outbound non-feeler
connections (feelers still only require NETWORK).
* This has the added benefit of removing nServicesExpected from
CNode - instead letting net_processing's VERSION message
handling simply check HasAllRelevantServices.
* This implies we believe WITNESS nodes to continue to be a
significant majority of nodes on the network, but also because
we cannot sync properly from !WITNESS nodes, it is strange to
continue using our valuable outbound slots on them.
* In order to prevent this change from preventing connection to
-connect= nodes which have !WITNESS, -connect nodes are now
given the "addnode" flag. This also allows outbound connections
to !NODE_NETWORK nodes for -connect nodes (which was already true
of addnodes).
* Has the (somewhat unintended) consequence of changing one of the
eviction metrics from the same
sometimes-connect-to-!WITNESS-nodes metric to requiring
HasRelevantServices.
This should make NODE_NETWORK_LIMITED much simpler to implement.
Tree-SHA512: 90606896c86cc5da14c77843b16674a6a012065e7b583d76d1c47a18215358abefcbab44ff4fab3fadcd39aa9a42d4740c6dc8874a58033bdfc8ad3fb5c649fc
7a91ceb5e [QA] Add RPC based rescan test (Jonas Schnelli)
c77170fbd [Wallet] add rescanblockchain <start_height> <stop_height> RPC command (Jonas Schnelli)
Pull request description:
A RPC rescan command is much more flexible for the following reasons:
* You can define the start and end-height
* It can be called during runtime
* It can work in multiwallet environment
Tree-SHA512: df67177bad6ad1d08e5a621f095564524fa3eb87204c2048ef7265e77013e4b1b29f991708f807002329a507a254f35e79a4ed28a2d18d4b3da7a75d57ce0ea5
Adds HasAllRelevantServices and GetRelevantServices, which check
for NETWORK|WITNESS.
This changes the following:
* Removes nRelevantServices from CConnman, disconnecting it a bit
more from protocol-level logic.
* Replaces our sometimes-connect-to-!WITNESS-nodes logic with
simply always requiring WITNESS|NETWORK for outbound non-feeler
connections (feelers still only require NETWORK).
* This has the added benefit of removing nServicesExpected from
CNode - instead letting net_processing's VERSION message
handling simply check HasAllRelevantServices.
* This implies we believe WITNESS nodes to continue to be a
significant majority of nodes on the network, but also because
we cannot sync properly from !WITNESS nodes, it is strange to
continue using our valuable outbound slots on them.
* In order to prevent this change from preventing connection to
-connect= nodes which have !WITNESS, -connect nodes are now
given the "addnode" flag. This also allows outbound connections
to !NODE_NETWORK nodes for -connect nodes (which was already true
of addnodes).
* Has the (somewhat unintended) consequence of changing one of the
eviction metrics from the same
sometimes-connect-to-!WITNESS-nodes metric to requiring
HasRelevantServices.
This should make NODE_NETWORK_LIMITED much simpler to implement.
8c2f4b888 Expose more parallelism with relaxed atomics (suggested in #9938). Fix a test to check the exclusive or of two properties rather than just or. (Jeremy Rubin)
Pull request description:
This PR is in response to #10026 and some feedback on #9938.
~Locally, all the checkqueue tests ran 3.2X faster on my machine. The worst offender, `test_CheckQueue_Correct_Random` ran 3.4X faster.~
1. ~Removes `GetRand()` and replaces it with a single deterministic FastRandomContext instance.~ #10321 replicated this
1. Exposes more parallelism with relaxed atomics, increasing chance of catching a bug. This does not change performance on my machine.
1. Makes one test case more restrictive (xor instead of or, see #9938).
Tree-SHA512: a59dfbee0273c713525a130dfedc1c7ff26f50c2aaca1e94ef5d759b1d6ea6338ffbd97f863b9f6209750d8a788a15fa8ae1bf26774ed2473c520811337e6b00
4526d21 Add test for multiwallet batch RPC calls (Russell Yanofsky)
74182f2 Add missing batch rpc calls to python coverage logs (Russell Yanofsky)
505530c Add missing multiwallet rpc calls to python coverage logs (Russell Yanofsky)
9f67646 Make AuthServiceProxy._batch method usable (Russell Yanofsky)
e02007a Limit AuthServiceProxyWrapper.__getattr__ wrapping (Russell Yanofsky)
edafc71 Fix uninitialized URI in batch RPC requests (Russell Yanofsky)
Pull request description:
This fixes "Wallet file not specified" errors when making batch wallet RPC calls with more than one wallet loaded. This issue was reported by @NicolasDorier in https://github.com/bitcoin/bitcoin/issues/11257
Request URI is not used for anything except multiwallet request dispatching, so this change has no other effect.
Tree-SHA512: b3907af48a6323f864bb045ee2fa56b604188b835025ef82ba3d81673244c04228d796323cec208a676e7cd578a95ec7c7ba1e84d0158b93844d5dda8f6589b9
bfebc0b Remove dead store in ecdsa_signature_parse_der_lax. (Eelis)
Pull request description:
This was one of the issues found by Clang's static analyzer (#9573).
Tree-SHA512: 3674c56ccdc750bfe42e41d56b1f2058b6921c5354f7e757f6af10a759c5be75e23d6c7932a4524b9a24da308f426803b11deffbfcf09a5898a4204ee61d16d2
55509f1 Document assumptions that are being made to avoid division by zero (practicalswift)
Pull request description:
Document assumptions (via `assert(…)`:s) that are being made to avoid division by zero.
Rationale:
* Make it clear to human reviewers and non-human static analyzers that what might look like potential division by zero cases are written the way they are intentionally (these cases are currently flagged by various static analyzers).
Tree-SHA512: bbb67b1370afd8f39bda35f9e3a20f4325f017d94cc1bfac3b0d36c9f34c2d95a9efe11efe44db29fb4aadd25d8276d8f0e03c8806ac64f0d21d821912e13b8e
619bb05 Squashed 'src/univalue/' changes from 16a1f7f6e..fe805ea74 (MarcoFalke)
Pull request description:
The subtree-merge commit also fixes the whitespace for failing tests, such that bisect doesn't break.
Finally, the bump also includes the changes that accidentally modified our subtree, such that the subtree check should work fine now:
```sh
./contrib/devtools/git-subtree-check.sh src/univalue
Tree-SHA512: 3009d1e52b6f41ef89ecc8a000649f08e44395538703f294995a6e913e3fbfb7813d6bd31fdb4acb6127fd4af99c095bf980a12f1f026bb27cacc66e1487cd1e
eff4bd8 [test] P2P functional test for certain fingerprinting protections (Jim Posen)
a2be3b6 [net] Ignore getheaders requests for very old side blocks (Jim Posen)
Pull request description:
Sending a getheaders message with an empty locator and a stop hash is a request for a single header by hash. The node will respond with headers for blocks not in the main chain as well as those in the main chain. To avoid fingerprinting, the node should, however, ignore requests for headers on side branches that are too old. This replicates the logic that currently exists for `getdata` requests for blocks.
Tree-SHA512: e04ef61e2b73945be6ec5977b3c5680b6dc3667246f8bfb67afae1ecaba900c0b49b18bbbb74869f7a37ef70b6ed99e78ebe0ea0a1569369fad9e447d720ffc4
4e955c5 Near-Bugfix: Reestablish consensus check removed in 8d7849b (Jorge Timón)
3e8c916 Introduce CheckInputsAndUpdateCoins static wrapper in txmempool.cpp (Jorge Timón)
832e074 Optimization: Minimize the number of times it is checked that no money is created (Jorge Timón)
3f0ee3e Proper indentation for CheckTxInputs and other minor fixes (Jorge Timón)
Pull request description:
...is created by individual transactions to 2 places (but call only once in each):
- ConnectBlock ( before calculated fees per txs twice )
- AcceptToMemoryPoolWorker ( before called CheckTxInputs 4 times and calculated
fees per tx one extra time )
Also call tx.GetValueOut() only once per call of CheckTxInputs (instead of 2)
For more motivation:
~~https://github.com/bitcoin/bitcoin/blob/master/src/main.cpp#L1493~~https://github.com/jtimon/bitcoin/compare/0.13-consensus-inputs...jtimon:0.13-consensus-inputs-comments
EDIT: partially replaces #6445
Near-Bugfix as pointed out in https://github.com/bitcoin/bitcoin/pull/8498#discussion_r124346132
Tree-SHA512: c71188e7c7c2425c9170ed7b803896755a92fd22f43b136eedaa6e554106696f0b10271d0ef0d0127c1eaafbc31d12eb19143df4f1b6882feecedf6ef05ea346
aa57590d7 Update importprivkey named args documentation (Dusty Williams)
Pull request description:
Addresses issue #11462 by updating the documentation for the importprivkey arguments to the correct names, and updates the functional test importprunedfunds.py to use named arguments when calling importprivkey.
Tree-SHA512: 64e14bf89c8c6eec9c37f6ec0c9fc0012fdb035d9ec32cd652110c75abaa922ec5c7523d6ec5098c8a7b42124159b5e330e070974eb79b8b92816f8d61074523
c6a995e Improve readability of DecodeBase58Check(...) (practicalswift)
Pull request description:
Use the more readable form ...
```c++
&vchRet[vchRet.size() - 4]
```
... instead of ...
```c++
&v.end()[-n]
```
Has the added benefit of eliminating a spurious static analyzer warning about improper use of negative values.
Tree-SHA512: 5895310c189e9322082c28f34342ff9a6c238e2cae3f204521111c8a7981bc555af60b42de082c91608c1125dfc244a65c4faf929249a067a51435e2be74cb39
ce2418f [gui] reset addrProxy/addrSeparateProxyTor if colon char missing (Cristian Mircea Messel)
Pull request description:
If addrProxy or addrSeparateProxyTor do not have a colon in the string
somewhere in the QSettings storage, then attempting to open the options
dialog will cause the entire program to crash.
Fixes#11209
Tree-SHA512: 2d9e6987cf05af3f41033290b61d00920f7fe4a65bea7efd96ed417a8ca7866d248f091e09947cc8aad3a6a4aa8b7777211cfff7f379a62188be50df2c46d4b2
Fixes#11462. Updated documentation for importprivkey function to use the correct name for the first argument.
Also updates a call to importprivkey to use named args in functional test.
0da49b5 Skip precompute sighash for transactions without witness (Johnson Lau)
Pull request description:
This saves unnecessary hash caching for non-segwit transactions, but I am not sure if the difference is noticeable.
Tree-SHA512: 5cd733a729a52a45781510b3572b26e76837a94155caa14311c6d23a27a12e9613ff278dfc2592e21f640202782f22c5ad00fca85c4de5efacaa617c48ccb08d
c626dcb50 Make fUseCrypto atomic (MeshCollider)
731065b11 Consistent parameter names in txdb.h (MeshCollider)
35aeabec6 Make fReindex atomic to avoid race (MeshCollider)
58d91af59 Fix race for mapBlockIndex in AppInitMain (MeshCollider)
Pull request description:
Fixes https://github.com/bitcoin/bitcoin/issues/11106
Also makes fReindex atomic as suggested in @TheBlueMatt comment below, and makes fUseCrypto atomic as suggested in 10916
d291e7635b just renames the parameters in the txdb header file to make them consistent with those used in the cpp file, noticed it when looking for uses of fReindex
Tree-SHA512: b378aa7289fd505b76565cd4d48dcdc04ac5540283ea1c80442170b0f13cb6df771b1a94dd54b7fec3478a7b4668c224ec9d795f16937782724c5d020edd3a42
f35d033 build: Make "make clean" remove all files created when running "make check" (practicalswift)
Pull request description:
Make `make clean` remove all files created when running `make check`. More specifically: remove also `obj/build.h` and `bench/data/block413567.raw.h` as part of `make clean`.
Before this patch:
```bash
$ git clone https://github.com/bitcoin/bitcoin.git
$ cd bitcoin/
$ ./autogen.sh
$ ./configure
$ cp -r ../bitcoin ../bitcoin-before-make
$ make check
$ make clean
$ cp -r ../bitcoin ../bitcoin-after-make-and-make-clean
$ cd ..
$ diff -rq bitcoin-before-make/ bitcoin-after-make-and-make-clean/ | grep -E "^Only in bitcoin-after-make-and-make-clean/" | grep -v dirstamp
Only in bitcoin-after-make-and-make-clean/src/bench/data: block413567.raw.h
Only in bitcoin-after-make-and-make-clean/src/obj: build.h
$
```
After this patch:
```bash
$ git clone https://github.com/bitcoin/bitcoin.git
$ cd bitcoin/
$ ./autogen.sh
$ ./configure
$ cp -r ../bitcoin ../bitcoin-before-make
$ make check
$ make clean
$ cp -r ../bitcoin ../bitcoin-after-make-and-make-clean
$ cd ..
$ diff -rq bitcoin-before-make/ bitcoin-after-make-and-make-clean/ | grep -E "^Only in bitcoin-after-make-and-make-clean/" | grep -v dirstamp
$
```
Tree-SHA512: 953e8423485ffd415f0ade6abe0b4c407454f67c332140ef019d89db425bb4a831327b3f634b8d69b17325dcfc6e3ac72dc2ba1ce5462158eecc3c05645e93ba
96c2ce9 Fix validationinterface build on super old boost/clang (Matt Corallo)
Pull request description:
This should fix all the non-dependancy issues for termux builds.
See Github issue #11388.
Tree-SHA512: ff0918fa76a6d4639a6c5b5e045ef053ce1d93eb0b1fe94c5fdfcc4d5e54e1118eeb09676ffd8f6d1acd630a63656944c6274ee3dbd7c09b7129c30647dbf4f9
0cd9273 rpc: Prevent `dumpwallet` from overwriting files (Wladimir J. van der Laan)
Pull request description:
Prevent arbitrary files from being overwritten by `dumpwallet`. There have been reports that users have overwritten wallet files this way. It may also avoid other security issues.
Fixes#9934. Adds mention to release notes and adds a test.
Tree-SHA512: 268c98636d40924d793b55a685a0b419bafd834ad369edaec08227ebe26ed4470ddea73008d1c4beb10ea445db1b0bb8e3546ba8fc2d1a411ebd4a0de8ce9120
More specifically: remove also obj/build.h and bench/data/block413567.raw.h.
Before this patch:
```
$ diff -rq bitcoin-before-make/ bitcoin-after-make-and-make-clean/ | grep -E "^Only in bitcoin-after-make-and-make-clean/" | grep -v dirstamp
Only in bitcoin-after-make-and-make-clean/src/bench/data: block413567.raw.h
Only in bitcoin-after-make-and-make-clean/src/obj: build.h
$
```
After this patch:
```
$ diff -rq bitcoin-before-make/ bitcoin-after-make-and-make-clean/ | grep -E "^Only in bitcoin-after-make-and-make-clean/" | grep -v dirstamp
$
```
cffe85f Skip sys::system(...) call in case of empty command (practicalswift)
6fb8f5f Check that -blocknotify command is non-empty before executing (practicalswift)
Pull request description:
Check that `-blocknotify` command is non-empty before executing.
To make the `BlockNotifyCallback(...)` (`-blocknotify`) behaviour consistent with that of:
* `AlertNotify(...)` (`-alertnotify`)
* `AddToWallet(...)` (`-walletnotify`)
Tree-SHA512: 18272166793a5a8b9cc2a727bfbcea53d38c329a55bc975c02db601329d608a61c20e026ce4b616193ecd3810dca4d3e2cb3bf773898a51872008a8dba96763e
6643b80 Add state message print to AcceptBlock failure message. (Matt Corallo)
Pull request description:
This should make it easier to debug issues where the CheckBlock at
the top of ProcessNewBlock fails (which does not print, in contrast
to AcceptBlock, which always prints).
This was motivated by #11371 which appears to be exactly such a case, and is not debuggable from the information provided. Not sure how much this would have helped in that case, but it is kinda weird that we can reject a block without ever printing why.
Tree-SHA512: 7a1c2c76080b810212da885c38e091609e409c62918cc326bb36a1096e09b2ae7e26fd4bdaefd79863d2894e2823e463005700a524940f177a59ef09f589b2f1
fd86f998f Squashed 'src/secp256k1/' changes from 84973d393..0b7024185 (MarcoFalke)
Pull request description:
The subtree should now match upstream again. Check with:
```sh
./contrib/devtools/git-subtree-check.sh src/secp256k1
```
The changes are only documentation/refactoring related.
Tree-SHA512: 43e8a95bcbfefef9e19ec38a92d2d57fdd4a16ddf726e036d36a0d806eb6f35b45b40ee69f980430e107895ec8725b5de4e36456b026214675e0b19630bb6fe9
If addrProxy or addrSeparateProxyTor do not have a colon in the string
somewhere in the QSettings storage, then attempting to open the options
dialog will cause the entire program to crash.
fafff1220 qa: Restore bitcoin-util-test py2 compatibility (MarcoFalke)
Pull request description:
Currently `./configure && make check` will look for python3, then python2. As long as we support python2 (and use it as fallback), `make check` should run fine with both python2 and python3.
Fixes#11352 by @Zenitur
Tree-SHA512: a335ebdd224328d6f924fe52a9b97de196926476c9ee04ce3280743ea93bcae355eb2d5d4bed4050c01b2e904105595eac7db2eaa9307207581caa0a98ebcc0b
This fixes "Wallet file not specified" errors when making batch wallet RPC
calls with more than one wallet loaded. This issue was reported by
NicolasDorier <nicolas.dorier@gmail.com>
https://github.com/bitcoin/bitcoin/issues/11257
Request URI is not used for anything except multiwallet request dispatching, so
this change has no other effects.
Fixes#11257
Sending a getheaders message with an empty locator and a stop hash
is a request for a single header by hash. The node will respond with
headers for blocks not in the main chain as well as those in the main
chain. To avoid fingerprinting, the node should, however, ignore
requests for headers on side branches that are too old.
46ce223d1 Add tests for CMerkleBlock usage with txids specified (James O'Beirne)
5ab586f90 Consolidate CMerkleBlock constructor into a single method (James O'Beirne)
Pull request description:
What started as a simple task to add test coverage ended up giving way to a light refactoring. This consolidates the mostly-identical `CMerkleBlock` constructors into one (using C++11 constructor delegation) and adds coverage for the by-txids construction case.
### Before
### After
Tree-SHA512: eed84ed3e8bfc43473077b575c8252759a857e37275e4b36ca7cc2c17a65895e5f494bfd9d4aeab09fc6e98fc6a9c641ac7ecc0ddbeefe01a9e4308e7909e529
634e38ca7 [Tests] Add Qt GUI tests to Overview and ReceiveCoin Page (Anditto Heristyo)
Pull request description:
I've added some Qt wallet tests based on #9974, namely the input & buttons on ReceiveCoin.
Tree-SHA512: f4223827145e35c2abee83a6ca777498bebcff3825fece10fbb1dbfd1f6bb017d3f2c0521662854b4407cdeee9c6a527269ab9cc28e0dc85c11b668155fcd195
07704c1 Add some tests for getchaintxstats (Akio Nakamura)
3336676 Fix getchaintxstats() (Akio Nakamura)
Pull request description:
1. calculate nblocks more adaptive.
-> set default nblocks to min (blocks for 1 month, target block's height - 1)
-> before PR: if not specify nblocks-parameter, illegal parameter error will happen when target block height is below nblocks.
2. correct error message.
-> nblocks accepts [1 .. block's height -1] . so add a word "-1".
3. add check 0-divide.
-> if nTimeDiff = 0 then use UniValue(UniValue::VNULL) and returns {... "txrate": null} .
-> before PR: if nTimeDiff = 0 then returns {... "txrate":} and bitcoin-cli cannot handle the response.
Tree-SHA512: e1962ce7bb05a5bc7dec03eb04a8e7578f50fdb68927fcfc0a2232905ef4d679293eee148ebe0866682d209a8c458d21fbe71715e7311adb81f37089aae1ed93
5ddf560 script: Change SignatureHash input index check to an assert. (Jim Posen)
Pull request description:
In the SignatureHash function, the input index must refer to a valid index. This is not enforced equally in the segwit/non-segwit branches and should be an assertion rather than returning a error hash.
Tree-SHA512: a775fc9e9bd9835c0ab36368aa45ab3d53e38f31fd4d2b8684a77ee6028c854c363df038681a59358b30138957573ad63b71d4a722c16e0830fb4fa72669ef39
3a4401a [Qt] Terminate string *pszExePath after readlink and without using memset (practicalswift)
Pull request description:
Terminate string `*pszExePath` after `readlink` and before passing to operator `<<`.
* `ssize_t readlink(const char *pathname, char *buf, size_t bufsiz)` does not append a null byte to `buf`.
* Operator `<<` expects a null-terminated string.
Tree-SHA512: fc18844bb23059fead8db0cb9b4b4ba6188f58e3f19ab4719c2737cc5dd6df23ae7d4804ef2820d39b334204a48ee3de1d202c272bcd156e60761af2fcb9349d
92848e5 Remove unused fTry from push_lock (João Barbosa)
Pull request description:
After #9674 (618ee92) the `fTry` argument in `push_lock` is no longer needed.
Tree-SHA512: a461f2ca9e590a9dfcc7814d9852d85f03712cb4735176b8b2db0e8dc731597c2a515650998ca7d53cf5a0c48b408a974a0704897036c6ed74788fc24c5e73ae
d601f16 Fix invalid memory access in CScript::operator+= (Anthony Towns)
Pull request description:
This is a fix for #11114 -- invoking "s += s" gets turned into "s.insert(s.end(), s.begin(), s.end())" which can result in an invalid memory access is s.capacity() < 2*s.size() (because s gets resized and possibly moved, so s.begin() and s.end() become invalid references when reading the values to be appended).
The fix is straightforward: reserve enough space in advance, so that insert() doesn't need to resize and thus its arguments remain valid.
A simple test case is added as well; though you probably need to run it via valgrind to actually catch the problem when it's not fixed...
Tree-SHA512: 4720d0c17463fdc43b344c45fe603423d20b30d48da1b9d85eeedc505d7f34db1ed5495ef1556459ae962a94717e3c6e8fc441763771901efea210d01322b7ef
bb8376b Verify DBWrapper iterators are taking snapshots (Matt Corallo)
Pull request description:
The LevelDB docs seem to indicate that an iterator will not take
snapshots (even providing instructions on how to do so yourself).
In several of the places we use them, we assume snapshots to have
been taken.
In order to make sure LevelDB doesn't change out from under us
(and to prevent the next person who reads the docs from having the
same fright I did), verify that snapshots are taken in our tests.
Tree-SHA512: 54f24dabc294962e9c20882f61809604421a661208d1568bb107102248603e8e7c12e929ccb0812a73d4e4f23fea61f1b48e7cc24da5a7260f1d14d89ba88cd6
The LevelDB docs seem to indicate that an iterator will not take
snapshots (even providing instructions on how to do so yourself).
In several of the places we use them, we assume snapshots to have
been taken.
In order to make sure LevelDB doesn't change out from under us
(and to prevent the next person who reads the docs from having the
same fright I did), verify that snapshots are taken in our tests.
1789e4675 Force explicit double -> int conversion for CFeeRate constructor (Matt Corallo)
53a6590f4 Make float <-> int casts explicit outside of test, qt, CFeeRate (Matt Corallo)
0b1b9148c Remove countMaskInv caching in bench framework (Matt Corallo)
Pull request description:
This fixes an issue where estimatesmartfee which matches at the min relay fee will return 999 sat/byte instead of 1000 sat/byte due to a float rounding issue. I went ahead and made all float <-> int conversion outside of test/qt explicit (test only had one or two more, Qt had quite a few, including many in the Qt headers themselves) and added overloads to CFeeRate to force callers to do an explicit round themselves. Easy to test with -Wfloat-conversion.
Tree-SHA512: 66087b08e5dfca67506da54ae057c2f9d86184415e8fa4fa0199e38839e06a3ce96c836fcb7593b7d960065f5240c594ff3a0cfa14333ac528421f5aeac835c9
cee28fbc3 Add error string for CLEANSTACK script violation, preventing an "unknown error" if the CLEANSTACK error condition is set. (Mark Friedenbach)
Pull request description:
This prevents an unhelpful "unknown error" from being printed in test logs if the CLEANSTACK error condition is set.
Tree-SHA512: cd6764e930184aef3d662e40c67f2ea8aea8552a26d33a567d0315a19d707a82aa2afad9f48ecbb731aa5b77fbbfbd7a6a3a989fdb1424a1181350052ff2a9b5
