vecMasternodes.size() == 0 is a nearly impossible condition due to the behavior
of dseep. Each time a node receives a ping where it's unaware of the masternode
it will ask for the dsee from it's peer.
- if(c % 5 == 0 && (RequestedMasterNodeList <= 2 || vecMasternodes.size()
+ if(c % 5 == 0 && RequestedMasterNodeList < 3){
Darksend defaults to a new mode which enables inputs/outputs
of each session to be different. For example 10DRK can be input
and 1DRKx10 can be output. This strengthens the anonymity of
Darksend greatly, which also increasing the usability (Users who
run out of .1DRK denominations can simply turn on Darksend to
split up larger inputs).
- When attempting to connect to a masternode for submission into the pool a recursive call to DoAutoDenominate was used. This could possibly take more than 1 minute to complete if it found a string of bad masternodes, in which case the correct masternode was overwritten and replaced with an invalid one. Upon submission, the DS TX was given to the incorrect node causing collateral to be charged.
- To fix this I've removed the recursion and added a critical section to DoAutoDenominate.
- Exact input denominations are matched in PrepareDarksendDenominate to remove the possibility of having change in the pool
- Removed disabled denominations, not needed anymore
Exact amounts are now allocated directly to denominated
funds then submitted to the pool. This improves anonymity
by never having non-denomination inputs enter or exit the pool.
Randomness has also been added to the amount of each session to
improve anonymity.
LiteMode disables Darksend/Masternodes/InstantX for clients
who want speed and don't need access to these features. UI
for Darksend is also hidden while in this mode.
- write to debug log only when debug option is specified
- do not log communication data that can contain secure information
- use newinline for curly braces according to coding conventions
Client crashes about every 24h on mainnet (with lots of masternodes)
and very rarely on testnet. AcceptableInputs has no need to check
HaveCoins as AcceptToMemoryPool does and would rarely cause the
segfault to occur.
New versions of OpenSSL will reject non-canonical DER signatures. However,
it'll happily decode them. Decode then re-encode before verification in order
to ensure that it is properly consumed.
Github-Pull: #5634
Rebased-From: 488ed32f2a
masternode.conf was broken when any index other than 0 was
used. This fixes it and allows the correct input to be selected
and the masternode to be started successfully.
- Fixed a few issues when calculating progress including some variables that should be limited to 1 (a and b). GetDenominatedBalance also seemed to be giving bad results so I rewrote it to be cleaner, not sure if that was a part of the problem.
- Progress bar is only recalculated when all inputs in wallet have been confirmed (will stop the progress from jumping around)
Crash was caused by Params() usage in CDarkSendPool::CDarkSendPool upon wallet start. I've moved init of the collateral address outside of the class to CDarkSendPool.InitCollateralAddress() instead.
More info regarding KeePass: http://keepass.info/
KeePass integration will use KeePassHttp (https://github.com/pfn/keepasshttp/) to facilitate communications between the client and KeePass. KeePassHttp is a plugin for KeePass 2.x and provides a secure means of exposing KeePass entries via HTTP for clients to consume.
The implementation is dependent on the following:
- crypter.h for AES encryption helper functions.
- rpcprotocol.h for handling RPC communications. Could only be used partially however due some static values in the code.
- OpenSSL for base64 encoding. regular util.h libraries were not used for base64 encoding/decoding since they do not use secure allocation.
- JSON Spirit for reading / writing RPC communications
The following changes were made:
- Added CLI options in help
- Added RPC commands: keepass <genkey|init|setpassphrase>
- Added keepass.h and keepass.cpp which hold the integration routines
- Modified rpcwallet.cpp to support RPC commands
The following new options are available for darkcoind and darkcoin-qt:
-keepass Use KeePass 2 integration using KeePassHttp plugin (default: 0)
-keepassport=<port> Connect to KeePassHttp on port <port> (default: 19455)
-keepasskey=<key> KeePassHttp key for AES encrypted communication with KeePass
-keepassid=<name> KeePassHttp id for the established association
-keepassname=<name> Name to construct url for KeePass entry that stores the wallet passphrase
The following rpc commands are available:
- keepass genkey: generates a base64 encoded 256 bit AES key that can be used for the communication with KeePassHttp. Only necessary for manual configuration. Use init for automatic configuration.
- keepass init: sets up the association between darkcoind and keepass by generating an AES key and sending an association message to KeePassHttp. This will trigger KeePass to ask for an Id for the association. Returns the association and the base64 encoded string for the AES key.
- keepass setpassphrase <passphrase>: updates the passphrase in KeePassHttp to a new value. This should match the passphrase you intend to use for the wallet. Please note that the standard RPC commands walletpassphrasechange and the wallet encrption from the QT GUI already send the updates to KeePassHttp, so this is only necessary for manual manipulation of the password.
Sample initialization flow from darkcoin-qt console (this needs to be done only once to set up the association):
- Have KeePass running with an open database
- Start darkcoin-qt
- Open console
- type: "keepass init" in darkcoin-qt console
- (keepass pops up and asks for an association id, fill that in). Example: mydrkwallet
- response: Association successful. Id: mydrkwalletdarkcoin - Key: AgQkcs6cI7v9tlSYKjG/+s8wJrGALHl3jLosJpPLzUE=
- Edit darkcoin.conf and fill in these values
keepass=1
keepasskey=AgQkcs6cI7v9tlSYKjG/+s8wJrGALHl3jLosJpPLzUE=
keepassid=mydrkwallet
keepassname=testwallet
- Restart darkcoin-qt
At this point, the association is made. The next action depends on your particular situation:
- current wallet is not yet encrypted. Encrypting the wallet will trigger the integration and stores the password in KeePass (Under the 'KeePassHttp Passwords' group, named after keepassname.
- current wallet is already encrypted: use "keepass setpassphrase <passphrase>" to store the passphrase in KeePass.
At this point, the passphrase is stored in KeePassHttp. When Unlocking the wallet, one can use keepass as the passphrase to trigger retrieval of the password. This works from the RPC commands as well as the GUI.
- Made masternodes/darksend compatible with regression testing mode (a local-only blockchain that doesn't require mining). Developers can now test multiple rounds in a few minutes without waiting on mining (much faster).
- Added dsee security verification to v11
- darkSendMasternodes -> vecMasternodes (must clearer)
Darksend is now capable of taking queue objects (which show who wants to mix what)
and looking at it's own inputs to see if it's at all possible to join their mixing
session. This plus other improvements should make Darksend much faster for mixing
coins.
DoAutoDenomination just wrote to the debug.log and because of that users commonly would have a hard time seeing what was happening. This fixes that by setting a status and displaying that status in the overview.
- Progress bar is far more accurate now. It only takes into account the inputs that could possibly go into Darksend and ignores the rest.
- Darksend can support down to 1.5DRK now.
- New "masternode outputs" command for start-many
TLS is subject to downgrade attacks when SSLv3 is available, and
SSLv3 has vulnerabilities.
The popular solution is to disable SSLv3. On the web this breaks
some tiny number of very old clients. While Bitcoin RPC shouldn't
be exposed to the open Internet, it also shouldn't be exposed to
really old SSL implementations, so it shouldn't be a major issue
for us to disable SSLv3.
There is more information on the downgrade attacks and disabling
SSLv3 at https://disablessl3.com/ .
Rebased-From: 683dc4009b
Previously -proxy was not setting the proxy for IsLimited networks, so
if you set your configuration to be onlynet=tor you wouldn't get an
IPv4 proxy set.
The payment protocol gets its proxy configuration from the IPv4 proxy,
and so it would experience a connection leak.
This addresses issue #5355 and also clears up a cosmetic bug where
getinfo proxy output shows nothing when onlynet=tor is set.
Conflicts:
src/init.cpp
Rebased-From: 3c77714134
Github-Issue: #5358
Qt5 is bottled, so configure won't find it without some help. Use
brew to find out its prefix.
Also, qt5 added the host_bins variable to pkg-config, use it.
There is no reason to store thousands of orphan transactions;
normally an orphan's parents will either be broadcast or
mined reasonably quickly.
This pull drops the maximum number of orphans from 10,000 down
to 100, and adds a command-line option (-maxorphantx) that is
just like -maxorphanblocks to override the default.
Prevent denial-of-service attacks by banning
peers that send us invalid orphan transactions
and only storing orphan transactions given to
us by a peer while the peer is connected.
Rebased-From: c74332c678
When the libpath doesn't line up with the value from config.sub, we don't find
the correct path to boost's libs. This adds a hack to try another path before
giving up.
Should close#3219.
Rebased-From: 54c7df81
Removes the limits on number of pubkeys for P2SH CHECKMULTISIG outputs.
Previously with the 500 byte scriptSig limit there were odd restrictions
where even a 1-of-12 P2SH could be spent in a standard transaction(1),
yet multisig scriptPubKey's requiring more signatures quickly ran out of
scriptSig space.
From a "stuff-data-in-the-blockchain" point of view not much has changed
as with the prior commit now only allowing the dummy value to be null
the newly allowed scriptSig space can only be used for signatures. In
any case, just using more outputs is trivial and doesn't cost much.
1) See 779b519480d8c5346de6e635119c7ee772e97ec872240c45e558f582a37b4b73
Mined by BTC Guild.
redeemScripts >520bytes can't be spent due to the
MAX_SCRIPT_ELEMENT_SIZE limit; previously the addmultisigaddress and
createmultisig RPC calls would let you violate that limit unknowingly.
Also made the wallet code itself check the redeemScript prior to adding
it to the wallet, which in the (rare) instance that a user has added an
invalid oversized redeemScript to their wallet causes an error on
startup. The affected key isn't added to the wallet; other keys are
unaffected.
Previously if bitcoind is linked with an OpenSSL which is compiled
without EC support, this is seen as an assertion failure "pKey !=
NULL" at key.cpp:134, which occurs after several seconds. It is an
esoteric piece of knowledge to interpret this as "oops, I linked
with the wrong OpenSSL", and because of the delay it may not even
be noticed.
The new output is
: OpenSSL appears to lack support for elliptic curve cryptography. For
more information, visit
https://en.bitcoin.it/wiki/OpenSSL_and_EC_Libraries
: Initialization sanity check failed. Bitcoin Core is shutting down.
which occurs immediately after attempted startup.
This also blocks in an InitSanityCheck() function which currently only
checks for EC support but should eventually do more. See #4081.
Rebased-From: 4a09e1d
Block 295,000 seems to meet the criteria of a reasonable timestamp and
no strange transactions. 295,000 is the current block height in the
bootstrap.dat torrent provided by jgarzik.
Rebased-From: 125fba1
Fixes#4679.
This leaves us with only one candidate, checkip.dyndns.org.
GetMyExternalIP should be phased out as soon as possible.
Rebased-From: c33b983
Generally useless information. Only updates on connect time, not after
that. Peers can easily lie and the median filter is not effective in
preventing that.
In the past it was used for progress display in the GUI but
`CheckPoints::guessVerificationProgress` provides a better way that is now used.
It was too easy to mislead it. Peers do lie about it in practice, see issue #4065.
From the RPC, `getpeerinfo` gives the peer raw values, which are more
useful.
