749be01 Move GetWarnings() into its own file. (Gregory Maxwell)
e3ba0ef Eliminate data races for strMiscWarning and fLargeWork*Found. (Gregory Maxwell)
c63198f Make QT runawayException call GetWarnings instead of directly access strMiscWarning. (Gregory Maxwell)
67dac4e Add unit tests for the CuckooCache (Jeremy Rubin)
c9e69fb Add CuckooCache implementation and replace the sigcache map_type with it (Jeremy Rubin)
deec83f init: Get rid of fServer flag (Wladimir J. van der Laan)
16ca0bf init: Try to aquire datadir lock before and after daemonization (Wladimir J. van der Laan)
0cc8b6b init: Split up AppInit2 into multiple phases (Wladimir J. van der Laan)
fafe7b3 contrib: Make fix-copyright-headers.py more portable (MarcoFalke)
fa27c0a [doc] Fix typos in comments, doxygen: Fix comment syntax (MarcoFalke)
fabfd5d [qa] pull-tester: Don't mute zmq ImportError (MarcoFalke)
67a5502 init: Fix typo in help message for -whitelistforcerelay (Wladimir J. van der Laan)
9d4eb9a Do diskspace check before import thread is started (Pieter Wuille)
aa59f2e Add extra message to avoid a long 'Loading banlist' (Pieter Wuille)
0fd2a33 Use a signal to continue init after genesis activation (Pieter Wuille)
a886dbf Use std::atomic for fRequestShutdown and fReopenDebugLog (Pieter Wuille)
16cf85f Revert "Include signal.h for sig_atomic_t in WIN32" (Pieter Wuille)
* Initial devnet
* Move genesis block adding into its own method
* Introduce -allowprivatenet to lift limitation on RFC1918 addresses
Normally, RFC1918 (192.168.x.x/10.x.x.x/...) addresses are not allowed
to be relayed. Also, masternodes won't start when the address is considered
invalid.
This is needed to test local devnet or regtest based networks.
* Lift the requirement of minimum MN age for regtest/devnet
* Implement named devnets
This allows the creation of multiple independent devnets. Each one is
identified by a name which is hardened into a "devnet genesis" block,
which is automatically positioned at height 1. Validation rules will
ensure that a node from devnet=test1 never be able to accept blocks
from devnet=test2. This is done by checking the expected devnet genesis
block.
The genesis block of the devnet is the same as the one from regtest. This
starts the devnet with a very low difficulty, allowing us to fill up
needed balances for masternodes very fast.
Also, the devnet name is put into the sub-version of the VERSION message.
If a node connects to the wrong network, it will immediately be disconnected.
* Allow to select multiple addresses from the same group in devnet/regtest
The selection code normally only allows to select addresses from the same
group (e.g. 192.168.x.x) once. This results in connecting to only a single
node in devnet/regtest.
* Show the devnet name in the title bar and on the loading screen
* Add AllowMultipleAddressesFromGroup to chainparams and use it in net.cpp
* Remove unused/unneeded scripts from devnet geneses creation
1. OP_RETURN not needed in input script of devnet genesis
2. genesisOutputScript was unused
* Fix copy/paste error in -allowprivatenet description
* Improve -devnet parameter error handling
- Only allow one of -devnet, -regtest or -testnet
- Only allow -devnet=name to be specified once
* Use different datadir for each devnet
* Fix `devnet-devnet` issue
* Fix devnet splashscreen (should use testnet img)
* Avoid passing devNetName around (most of the time)
* Remove nMaxTipAge from CDevNetParams
Not present anymore after rebase on develop
027fdb8 When/if the copyright line does not mention Bitcoin Core developers, add a second line to copyrights in -version, About dialog, and splash screen (Luke Dashjr)
cc2095e Rewrite FormatParagraph to handle newlines within input strings correctly (Luke Dashjr)
cddffaf Bugfix: Include COPYRIGHT_HOLDERS_SUBSTITUTION in Makefile substitutions so it gets passed to extract-strings correctly (Luke Dashjr)
29598e4 Move PACKAGE_URL to configure.ac (Luke Dashjr)
78ec83d splashscreen: Resize text to fit exactly (Luke Dashjr)
3cae140 Bugfix: Actually use _COPYRIGHT_HOLDERS_SUBSTITUTION everywhere (Luke Dashjr)
4d5a3df Bugfix: gitian-descriptors: Add missing python-setuptools requirement for OS X (biplist module) (Luke Dashjr)
e4ab5e5 Bugfix: Correct copyright year in Mac DMG background image (Luke Dashjr)
917b1d0 Set copyright holders displayed in notices separately from the package name (Luke Dashjr)
c39a6ff Travis & gitian-osx: Use depends for ds_store and mac_alias modules (Luke Dashjr)
902ccde depends: Add mac_alias to depends (Luke Dashjr)
82a2d98 depends: Add ds_store to depends (Cory Fields)
de619a3 depends: Pass PYTHONPATH along to configure (Cory Fields)
e611b6e macdeploy: Use rsvg-convert rather than cairosvg (Luke Dashjr)
63bcdc5 More complicated package name substitution for Mac deployment (Luke Dashjr)
1a6c67c Parameterise 2009 in translatable copyright strings (Luke Dashjr)
d5f4683 Unify package name to as few places as possible without major changes (Luke Dashjr)
* Allow compilation with `--disable-wallet`
* fix remaining references
* Drop wallet references/include in CActiveMasternode and fix other files affected by this change
* Wrap privatesend-client.h include with ifdef/endif and fix other files affected by this change
* Re-enable Travis build with no wallet
reverts 267e57877b
542ce6e Report [CANCELLED] instead of [DONE] when shut down during txdb upgrade (Jonas Schnelli)
83fbea3 Report txdb upgrade not more often then every 10% (Jonas Schnelli)
06c5b6e Show txdb upgrade progress in debug log (Jonas Schnelli)
316fcb5 Allow to cancel the txdb upgrade via splashscreen callback (Jonas Schnelli)
ae09d45 Allow to shut down during txdb upgrade (Jonas Schnelli)
00cb69b [Qt] allow to execute a callback during splashscreen progress (Jonas Schnelli)
Tree-SHA512: 23190f23f441bfd60821e49f8b3698a6bef97eb0e0ee659328e4a7395769ecd1616420eacc38aa1fa0ff62b9de5f13a0098dc798cdec6bff649575cefebc0db2
3ff1fa8 Use override keyword on CCoinsView overrides (Russell Yanofsky)
24e44c3 Don't return stale data from CCoinsViewCache::Cursor() (Russell Yanofsky)
Tree-SHA512: 08699dae0925ffb9c018f02612ac6b7eaf73ec331e2f4f934f1fe25a2ce120735fa38596926e924897c203f7470e99f0a99cf70d2ce31ff428b105e16583a861
589827975 scripted-diff: various renames for per-utxo consistency (Pieter Wuille)
a5e02bc7f Increase travis unit test timeout (Pieter Wuille)
73de2c1ff Rename CCoinsCacheEntry::coins to coin (Pieter Wuille)
119e552f7 Merge CCoinsViewCache's GetOutputFor and AccessCoin (Pieter Wuille)
580b02309 [MOVEONLY] Move old CCoins class to txdb.cpp (Pieter Wuille)
8b25d2c0c Upgrade from per-tx database to per-txout (Pieter Wuille)
b2af357f3 Reduce reserved memory space for flushing (Pieter Wuille)
41aa5b79a Pack Coin more tightly (Pieter Wuille)
97072d668 Remove unused CCoins methods (Pieter Wuille)
ce23efaa5 Extend coins_tests (Pieter Wuille)
508307968 Switch CCoinsView and chainstate db from per-txid to per-txout (Pieter Wuille)
4ec0d9e79 Refactor GetUTXOStats in preparation for per-COutPoint iteration (Pieter Wuille)
13870b56f Replace CCoins-based CTxMemPool::pruneSpent with isSpent (Pieter Wuille)
05293f3cb Remove ModifyCoins/ModifyNewCoins (Pieter Wuille)
961e48397 Switch tests from ModifyCoins to AddCoin/SpendCoin (Pieter Wuille)
8b3868c1b Switch CScriptCheck to use Coin instead of CCoins (Pieter Wuille)
c87b957a3 Only pass things committed to by tx's witness hash to CScriptCheck (Matt Corallo)
f68cdfe92 Switch from per-tx to per-txout CCoinsViewCache methods in some places (Pieter Wuille)
000391132 Introduce new per-txout CCoinsViewCache functions (Pieter Wuille)
bd83111a0 Optimization: Coin&& to ApplyTxInUndo (Pieter Wuille)
cb2c7fdac Replace CTxInUndo with Coin (Pieter Wuille)
422634e2f Introduce Coin, a single unspent output (Pieter Wuille)
7d991b55d Store/allow tx metadata in all undo records (Pieter Wuille)
c3aa0c119 Report on-disk size in gettxoutsetinfo (Pieter Wuille)
d34242430 Remove/ignore tx version in utxo and undo (Pieter Wuille)
7e0032290 Add specialization of SipHash for 256 + 32 bit data (Pieter Wuille)
e484652fc Introduce CHashVerifier to hash read data (Pieter Wuille)
f54580e7e error() in disconnect for disk corruption, not inconsistency (Pieter Wuille)
e66dbde6d Add SizeEstimate to CDBBatch (Pieter Wuille)
Tree-SHA512: ce1fb1e40c77d38915cd02189fab7a8b125c7f44d425c85579d872c3bede3a437760997907c99d7b3017ced1c2de54b2ac7223d99d83a6658fe5ef61edef1de3
This monstrous change eliminates all remaining uses of
g_connman global variable in Dash-specific code.
Unlike previous changes eliminating g_connman use
that were isolated to particular modules, this one covers
multiple modules simultaneously because they are so interdependent
that change in one module was quickly spreading to others.
This is mostly invariant change that was done by
* changing all functions using g_connman to use connman argument,
* changing all functions calling these functions to use connman argument,
* repeating previous step until there's nothing to change.
After multiple iterations, this process converged to final result,
producing code that is mostly equivalent to original one, but passing
CConnman instance through arguments instead of global variable.
The only exception to equivalence of resulting code is that I had to
create overload of CMasternodeMan::CheckAndRemove() method without arguments
that does nothing just for use in CFlatDB<CMasternodeMan>::Dump() and
CFlatDB<CMasternodeMan>::Load() methods.
Normal CMasternodeMan::CheckAndRemove() overload now has argument of
CConnman& type and is used everywhere else.
The normal overload has this code in the beginning:
if(!masternodeSync.IsMasternodeListSynced()) return;
Masternode list is not synced yet when we load "mncache.dat" file,
and we save "mncache.dat" file on shutdown, so I presume that it's OK
to use overload that does nothing in both cases.
Signed-off-by: Oleg Girko <ol@infoserver.lv>
* Merge #7506: Use CCoinControl selection in CWallet::FundTransaction
d6cc6a1 Use CCoinControl selection in CWallet::FundTransaction (João Barbosa)
* Merge #7732: [Qt] Debug window: replace "Build date" with "Datadir"
fc737d1 [Qt] remove unused formatBuildDate method (Jonas Schnelli)
4856f1d [Qt] Debug window: replace "Build date" with "Datadir" (Jonas Schnelli)
* Merge #7707: [RPC][QT] UI support for abandoned transactions
8efed3b [Qt] Support for abandoned/abandoning transactions (Jonas Schnelli)
* Merge #7688: List solvability in listunspent output and improve help
c3932b3 List solvability in listunspent output and improve help (Pieter Wuille)
* Merge #8006: Qt: Add option to disable the system tray icon
8b0e497 Qt: Add option to hide the system tray icon (Tyler Hardin)
* Merge #8073: qt: askpassphrasedialog: Clear pass fields on accept
02ce2a3 qt: askpassphrasedialog: Clear pass fields on accept (Pavel Vasin)
* Merge #8231: [Qt] fix a bug where the SplashScreen will not be hidden during startup
b3e1348 [Qt] fix a bug where the SplashScreen will not be hidden during startup (Jonas Schnelli)
* Merge #8257: Do not ask a UI question from bitcoind
1acf1db Do not ask a UI question from bitcoind (Pieter Wuille)
* Merge #8463: [qt] Remove Priority from coincontrol dialog
fa8dd78 [qt] Remove Priority from coincontrol dialog (MarcoFalke)
* Merge #8678: [Qt][CoinControl] fix UI bug that could result in paying unexpected fee
0480293 [Qt][CoinControl] fix UI bug that could result in paying unexpected fee (Jonas Schnelli)
* Merge #8672: Qt: Show transaction size in transaction details window
c015634 qt: Adding transaction size to transaction details window (Hampus Sjöberg)
\-- merge fix for s/size/total size/
fdf82fb Adding method GetTotalSize() to CTransaction (Hampus Sjöberg)
* Merge #8371: [Qt] Add out-of-sync modal info layer
08827df [Qt] modalinfolayer: removed unused comments, renamed signal, code style overhaul (Jonas Schnelli)
d8b062e [Qt] only update "amount of blocks left" when the header chain is in-sync (Jonas Schnelli)
e3245b4 [Qt] add out-of-sync modal info layer (Jonas Schnelli)
e47052f [Qt] ClientModel add method to get the height of the header chain (Jonas Schnelli)
a001f18 [Qt] Always pass the numBlocksChanged signal for headers tip changed (Jonas Schnelli)
bd44a04 [Qt] make Out-Of-Sync warning icon clickable (Jonas Schnelli)
0904c3c [Refactor] refactor function that forms human readable text out of a timeoffset (Jonas Schnelli)
* Merge #8805: Trivial: Grammar and capitalization
c9ce17b Trivial: Grammar and capitalization (Derek Miller)
* Merge #8885: gui: fix ban from qt console
cb78c60 gui: fix ban from qt console (Cory Fields)
* Merge #8821: [qt] sync-overlay: Don't block during reindex
fa85e86 [qt] sync-overlay: Don't show estimated number of headers left (MarcoFalke)
faa4de2 [qt] sync-overlay: Don't block during reindex (MarcoFalke)
* Support themes for new transaction_abandoned icon
* Fix constructor call to COutput
* Merge #7842: RPC: do not print minping time in getpeerinfo when no ping received yet
62a6486 RPC: do not print ping info in getpeerinfo when no ping received yet, fix help (Pavel Janík)
* Merge #8918: Qt: Add "Copy URI" to payment request context menu
21f5a63 Qt: Add "Copy URI" to payment request context menu (Luke Dashjr)
* Merge #8925: qt: Display minimum ping in debug window.
1724a40 Display minimum ping in debug window. (R E Broadley)
* Merge #8972: [Qt] make warnings label selectable (jonasschnelli)
ef0c9ee [Qt] make warnings label selectable (Jonas Schnelli)
* Make background of warning icon transparent in modaloverlay
* Merge #9088: Reduce ambiguity of warning message
77cbbd9 Make warning message about wallet balance possibly being incorrect less ambiguous. (R E Broadley)
* Replace Bitcoin with Dash in modal overlay
* Remove clicked signals from labelWalletStatus and labelTransactionsStatus
As both are really just labels, clicking on those is not possible.
This is different in Bitcoin, where these labels are actually buttons.
* Pull out modaloverlay show/hide into it's own if/else block and switch to time based check
Also don't use masternodeSync.IsBlockchainSynced() for now as it won't
report the blockchain being synced before the first block (or other MN
data?) arrives. This would otherwise give the impression that sync is
being stuck.
* net: Split resolving out of CNetAddr
* net: Split resolving out of CService
* net: Split resolving out of CSubNet
* net: move CNetAddr/CService/CSubNet out of netbase
* net: narrow include scope after moving to netaddress
Net functionality is no longer needed for CAddress/CAddrman/etc. now that
CNetAddr/CService/CSubNet are dumb storage classes.
* net: Add direct tests for new CSubNet constructors
* net: Have LookupNumeric return a CService directly
Also fix up a few small issues:
- Lookup with "badip:port" now sets the port to 0
- Don't allow assert to have side-effects
* net: fixup nits
* net: require lookup functions to specify all arguments
To make it clear where DNS resolves are happening
* net: manually resolve dns seed sources
Note: Some seeds aren't actually returning an IP for their name entries, so
they're being added to addrman with a source of [::].
This commit shouldn't change that behavior, for better or worse.
* net: resolve outside of storage structures
Rather than allowing CNetAddr/CService/CSubNet to launch DNS queries, require
that addresses are already resolved.
This greatly simplifies async resolve logic, and makes it harder to
accidentally leak DNS queries.
* net: disable resolving from storage structures
CNetAddr/CService/CSubnet can no longer resolve DNS.
* IBD check uses minimumchain work instead of checkpoints.
This introduces a 'minimum chain work' chainparam which is intended
to be the known amount of work in the chain for the network at the
time of software release. If you don't have this much work, you're
not yet caught up.
This is used instead of the count of blocks test from checkpoints.
This criteria is trivial to keep updated as there is no element of
subjectivity, trust, or position dependence to it. It is also a more
reliable metric of sync status than a block count.
* Remove GetTotalBlocksEstimate and checkpoint tests that test nothing.
GetTotalBlocksEstimate is no longer used and it was the only thing
the checkpoint tests were testing.
Since checkpoints are on their way out it makes more sense to remove
the test file than to cook up a new pointless test.
# Conflicts:
# src/Makefile.test.include
# src/test/Checkpoints_tests.cpp
* IsInitialBlockDownload no longer uses header-only timestamps.
This avoids a corner case (mostly visible on testnet) where bogus
headers can keep nodes in IsInitialBlockDownload.
* Delay parallel block download until chain has sufficient work
nMinimumChainWork is an anti-DoS threshold; wait until we have a proposed
tip with more work than that before downloading blocks towards that tip.
* Add timeout for headers sync
At startup, we choose one peer to serve us the headers chain, until
our best header is close to caught up. Disconnect this peer if more
than 15 minutes + 1ms/expected_header passes and our best header
is still more than 1 day away from current time.
* Introduce assumevalid setting to skip presumed valid scripts.
This disentangles the script validation skipping from checkpoints.
A new option is introduced "assumevalid" which specifies a block whos
ancestors we assume all have valid scriptsigs and so we do not check
them when they are also burried under the best header by two weeks
worth of work.
Unlike checkpoints this has no influence on consensus unless you set
it to a block with an invalid history. Because of this it can be
easily be updated without risk of influencing the network consensus.
This results in a massive IBD speedup.
This approach was independently recommended by Peter Todd and Luke-Jr
since POW based signature skipping (see PR#9180) does not have the
verifiable properties of a specific hash and may create bad incentives.
The downside is that, like checkpoints, the defaults bitrot and older
releases will sync slower. On the plus side users can provide their
own value here, and if they set it to something crazy all that will
happen is more time will be spend validating signatures.
Checkblocks and checklevel are also moved to the hidden debug options:
Especially now that checkblocks has a low default there is little need
to change these settings, and users frequently misunderstand them as
influencing security or IBD speed. By hiding them we offset the
space added by this new option.
* Add consensusParams to FindNextBlocksToDownload
* Adjust check in headers timeout logic to align with 144 blocks in Dash
* Change sync process:
- IsBlockchainSynced(): drop CheckNodeHeight() and all complicated code, use fInitialDownload in UpdatedBlockTip() to switch initial states
- ProcessTick(): detect sleep mode like it was in IsBlockchainSynced(), not by number of masternodes
* Changes for sync in governance:
- do not keep sync alive on ConfirmInventoryRequest()
- skip some governance actions until we are synced to some level
* do not run CMasternodeMan::UpdateLastPaid() until winners list is synced
* start syncing mn list on the same node right after requesting sporks
* replace nTimeLast<Asset> with the unified nTimeLastBumped, bump on UpdatedBlockTip
* fix comments and LogPrintf-s
* remove excessive MASTERNODE_SYNC_IBD
* a bit more descriptive BumpAssetLastTime in few cases
* net: a few small cleanups before replacing boost threads
- Drop the interruption point directly after the pnode allocation. This would
be leaky if hit.
- Rearrange thread creation so that the socket handler comes first
* net: add CThreadInterrupt and InterruptibleSleep
* net: make net interruptible
Also now that net threads are interruptible, switch them to use std
threads/binds/mutexes/condvars.
* net: make net processing interruptible
* net: remove thread_interrupted catch
This is now a std::thread, so there's no hope of catching a boost interruption
point.
* net: make proxy receives interruptible
* net: misc header cleanups
* Remove orphan state wipe from UnloadBlockIndex.
As orphan state is now "network state", like in
d6ea737be1,
UnloadBlockIndex is only used during init if we end up reindexing
to clear our block state so that we can start over. However, at
that time no connections have been brought up as CConnman hasn't
been started yet, so all of the network processing state logic is
empty when its called.
* Move network-msg-processing code out of main to its own file
* Rename the remaining main.{h,cpp} to validation.{h,cpp}
* Move MarkBlockAsReceived out of ProcessNewMessage
* Remove network state wipe from UnloadBlockIndex.
UnloadBlockIndex is only used during init if we end up reindexing
to clear our block state so that we can start over. However, at
that time no connections have been brought up as CConnman hasn't
been started yet, so all of the network processing state logic is
empty when its called.
Additionally, the initialization of the recentRejects set is moved
to InitPeerLogic.
* Move all calls to CheckBlockIndex out of net-processing logic
This will result in many more calls to CheckBlockIndex when
connecting a list of headers (eg in ::HEADERS messages processing)
but its only enabled in debug mode, and that should mostly just be
during IBD, so it should be OK.
* Move FlushStateToDisk call out of ProcessMessages::TX into ATMP
* Move nTimeBestReceived updating into net processing code
* Make validationinterface.UpdatedBlockTip more verbose
In anticipation of making all the callbacks out of block processing
flow through it. Note that vHashes will always have something in it
since pindexFork != pindexNewTip.
* Remove duplicate nBlocksEstimate cmp (we already checked IsIBD())
* Remove CConnman parameter from ProcessNewBlock/ActivateBestChain
* Remove SyncWithWallets wrapper function
* Move net-processing logic definitions together in main.h
* Use CValidationInterface from chain logic to notify peer logic
This adds a new CValidationInterface subclass, defined in main.h,
to receive notifications of UpdatedBlockTip and use that to push
blocks to peers, instead of doing it directly from
ActivateBestChain.
* Always call UpdatedBlockTip, even if blocks were only disconnected
* Use BlockChecked signal to send reject messages from mapBlockSource
In the case of (for example) an already-running bitcoind, the shutdown sequence
begins before CConnman has been created, leading to a null-pointer dereference
when g_connman->Stop() is called.
Instead, Just let the CConnman dtor take care of stopping.
* net: Add fRelayTxes flag
Add a fRelayTxes to keep track of the relay transaction flag
we send to other peers.
* rpc: Add `relaytxes` flag to `getnetworkinfo`
Re-work of PR #7841 by dragongem45.
Closes#7771.
* net: move CBanDB and CAddrDB out of net.h/cpp
This will eventually solve a circular dependency
* net: Create CConnman to encapsulate p2p connections
* net: Move socket binding into CConnman
* net: move OpenNetworkConnection into CConnman
* net: move ban and addrman functions into CConnman
* net: Add oneshot functions to CConnman
* net: move added node functions to CConnman
* net: Add most functions needed for vNodes to CConnman
* net: handle nodesignals in CConnman
* net: Pass CConnection to wallet rather than using the global
* net: Add rpc error for missing/disabled p2p functionality
* net: Pass CConnman around as needed
* gui: add NodeID to the peer table
* net: create generic functor accessors and move vNodes to CConnman
* net: move whitelist functions into CConnman
* net: move nLastNodeId to CConnman
* net: move nLocalHostNonce to CConnman
This behavior seems to have been quite racy and broken.
Move nLocalHostNonce into CNode, and check received nonces against all
non-fully-connected nodes. If there's a match, assume we've connected
to ourself.
* net: move messageHandlerCondition to CConnman
* net: move send/recv statistics to CConnman
* net: move SendBufferSize/ReceiveFloodSize to CConnman
* net: move nLocalServices/nRelevantServices to CConnman
These are in-turn passed to CNode at connection time. This allows us to offer
different services to different peers (or test the effects of doing so).
* net: move semOutbound and semMasternodeOutbound to CConnman
* net: SocketSendData returns written size
* net: move max/max-outbound to CConnman
* net: Pass best block known height into CConnman
CConnman then passes the current best height into CNode at creation time.
This way CConnman/CNode have no dependency on main for height, and the signals
only move in one direction.
This also helps to prevent identity leakage a tiny bit. Before this change, an
attacker could theoretically make 2 connections on different interfaces. They
would connect fully on one, and only establish the initial connection on the
other. Once they receive a new block, they would relay it to your first
connection, and immediately commence the version handshake on the second. Since
the new block height is reflected immediately, they could attempt to learn
whether the two connections were correlated.
This is, of course, incredibly unlikely to work due to the small timings
involved and receipt from other senders. But it doesn't hurt to lock-in
nBestHeight at the time of connection, rather than letting the remote choose
the time.
* net: pass CClientUIInterface into CConnman
* net: Drop StartNode/StopNode and use CConnman directly
* net: Introduce CConnection::Options to avoid passing so many params
* net: add nSendBufferMaxSize/nReceiveFloodSize to CConnection::Options
* net: move vNodesDisconnected into CConnman
* Made the ForEachNode* functions in src/net.cpp more pragmatic and self documenting
* Convert ForEachNode* functions to take a templated function argument rather than a std::function to eliminate std::function overhead
* net: move MAX_FEELER_CONNECTIONS into connman
As per meeting 2016-03-31
https://bitcoincore.org/en/meetings/2016/03/31/#bad-chain-alerts
The partition checker was producing huge number of false-positives
and was disabled in 0.12.1 on the understanding it would either be
fixed in 0.13 or removed entirely from master if not.
*** Dash specific note: ***
This check was disabled in Dash already.
* Make ProcessNewBlock dbp const and update comment
* Switch reindexing to AcceptBlock in-loop and ActivateBestChain afterwards
* Optimize ActivateBestChain for long chains
* Add -reindex-chainstate that does not rebuild block index
* Report reindexing progress in GUI
* Only store and connect to NODE_NETWORK nodes
* Keep addrman's nService bits consistent with outbound observations
* Verify that outbound connections have expected services
* Don't require services in -addnode
* Introduce enum ServiceFlags for service flags
* Introduce REQUIRED_SERVICES constant
* HD wallet
Minimal set of changes (no refactoring) backported from Bitcoin upstream to make HD wallets work in Dash 0.12.1.x+
* minimal bip44 (hardcoded account and change)
* minimal bip39
Additional cmd-line options for new wallet:
-mnemonic
-mnemonicpassphrase
* Do not recreate HD wallet on encryption
Adjusted keypool.py test
* Do not store any private keys for hd wallet besides the master one
Derive all keys on the fly.
Original idea/implementation - btc PR9298, backported and improved
* actually use bip39
* pbkdf2 test
* backport wallet-hd.py test
* Allow specifying hd seed, add dumphdseed rpc, fix bugs
- -hdseed cmd-line param to specify HD seed on wallet creation
- dumphdseed rpc to dump HD seed
- allow seed of any size
- fix dumpwallet rpc bug (wasn't decrypting HD seed)
- print HD seed and extended public masterkey on dumpwallet
* top up keypool on HD wallet encryption
* split HD chain: external/internal
* add missing cs_wallet lock in init.cpp
* fix `const char *` issues (use strings)
* default mnemonic passphrase is an empty string in all cases
* store mnemonic/mnemonicpassphrase
replace dumphdseed with dumphdinfo
* Add fCrypted flag to CHDChain
* prepare internal structures for multiple HD accounts
(plus some code cleanup)
* use secure allocator for storing sensitive HD data
* use secure strings for mnemonic(passphrase)
* small fix in GenerateNewHDChain
* use 24 words for mnemonic by default
* make sure mnemonic passphrase provided by user does not exceed 256 symbols
* more usage of secure allocators and memory_cleanse
* code cleanup
* rename: CSecureVector -> SecureVector
* add missing include
* fix warning in rpcdump.cpp
* refactor mnemonic_check (also fix a bug)
* move bip39 functions to CMnemonic
* Few fixes for CMnemonic:
- use `SecureVector` for data, bits, seed
- `Check` should return bool
* init vectors with desired size where possible
- some were not used, some were included twice, some were in the wrong place, some were missing (but it compiled because some were in the wrong place)
- organized a bit better, grouped dash specific includes in original bitcoin files, should save some time solving conflicts when/if merging patches later
* Make local address discovery more robust in CActiveMasternode
* parameter interaction: -masternode=1 -> setting -listen=1
* slightly postpone first run to give net thread a chance to connect to some peers
* make sure local address detected in CActiveMasternode::ManageStateInitial is valid
* Simplified address detection logic
* locks in PS
* lock in governance
* locks in IS
* lock in ProcessGetData
* locks in CMasternodeSync
* centralize mnodeman.Check call
* locks order in mnpayments
* use current block chainTip when possible (less locks)
* add missing lock in CountInputsWithAmount
* fix deadlock RequestLowDataPaymentBlocks/IsTransactionValid
* LOCK2 in CheckMnbAndUpdateMasternodeList, CheckAndUpdate, SendVerifyRequest
* LOCK(cs) is not needed here
* Decouple governance init actions from serialization
Should fix this:
```
Assertion failed: lock governance.cs not held in governance-classes.cpp:117; locks held:
cs_Shutdown init.cpp:200 (TRY)
cs ./governance.h:195
cs governance.cpp:835
Abort trap: 6
```
* Fix CGovernanceManager initialization problem
* Added logging messages for cases where CGovernanceManager receives a message while not synced
* Prevent potential NULL pointer dereference
- add "spork" debug category
- move "seen" and "unknown" to new "spork" debug category to reduce log spam
- new/updated/seen messages should not overlap
f0ed400 darkSendSigner.SignMessage() should not return error message
154f1b6 darkSendSigner.VerifyMessage() should return non-localized message, its callers should populate error to debug.log
b130c32 darkSendSigner.GetKeysFromSecret() should not return error message, its callers should handle it
068c178 Added DBG macro in util.h to facilitate debugging
- This macro allows debugging statements (typically printf's or cout's) to
be activated or deactivated with a single comment. Uncomment the line:
//#define ENABLE_DASH_DEBUG
in util.h to enable debugging statements.
- When commented any code wrapped with the DBG() macro will simply be removed
by the preprocessor. When not commented all such wrapped statements will
be present.
- For maximum effectiveness it is best that util.h be the first effective include
in all source files. It is also possible to enable the macro for a single file
by temporarily adding #define ENABLE_DASH_DEBUG to the top of the file.
- Code committed to non-development branches should always have the define
commented.
d125d9b V0.12.1.x -- merging trigger/generic object/superblock changes for testnet phase II
- This commit contains the core governance system changes for 0.12.1. Any unrelated
changes have either been removed or moved to separate commits.
120724c File mode fixes
- Changed mode 0755->0644 on several source files.
c7f9e11 Updated todo reminders
- Added reminder to revert temporary reduction of number of votes
required to trigger superblock to 1 for testing
92adc98 Made CSuperblockManager::IsValidSuperblockHeight an inline function
- This is for efficiency since this function is called often and is
only 1 line of code.
c050ed7 Added comment explaining rationale for no LOCK(cs) in CSuperblock::IsValid
dc933fe Removed unused CSuperblockManager::IsBlockValid function
decec88 Moved calls to SuperblockManager::IsValidSuperblockHeight into IsSuperblockTriggered.
- Since calls to the later function are always protected by the former there's
no reason to keep these separate and this simplifies the code in
masternode-payments.cpp.
8672885 Reestablished expected value check for non-superblocks in IsBlockValueValid
b01cbe0 Changes to IsBlockValueValid to fix rpc test failure
a937c76 Changed include order to allow per file activation of the DBG macro
d116aa5 Fixed IsValidSuperblockHeight logic
- Note this has an effect on testing because we can now only create
1 superblock per day. Devs may need to temporarily change testnet params
for easier testing.
2d0c2de Convert superblock payments to CAmount
- We assume that payment values in JSON are in units of DASH
for consistency with other RPC functions, such as
createrawtransaction.
376b833 Revert temporary testing value for nAbsVoteReq
- Also ensure that number of votes required is never smaller than 1
8c89f4b Cleaned up CSuperblock error handling
- Exceptions are now thrown consistently rather than using a mix of
exceptions and return code checking. Exceptions are now caught only
in AddNewTrigger when the CSuperblock constructor is called. Unnecessary object
status members have been removed.
d7c8a6b Removed utilstrencodings header
- This appears to help with travis tests, for unknown reasons.
c4dfc7a Fixed some minor code review issues
63c3580 Reverted locking change in miner.
- This should have been done in the original PR but was overlooked.
4ab72de Fixed variable name to match common practice and bracket formatting
886a678 Improvements to vote conversion code
- Replaced redundantly defined function with inclusion of governance-vote.h
- Replaced magic numbers with their corresponding constant symbols
0a37966 Reordered governance message handling
86d8505 Refactor CActiveMasternode
+ move strMasterNodeAddr to CActiveMasternode
a005c79 Refactor InstantSend
+ new lock cs_instantsend to protect maps on CleanTransactionLocksList()
+ new DEFAULT_INSTANTSEND_DEPTH constant
+ rename MIN_INSTANTX_PROTO_VERSION to MIN_INSTANTSEND_PROTO_VERSION and bump it
d24182c Refactor Privatesend
+ decouple from util.h and version.h
+ more functions for CDarksendBroadcastTx: constructors, signing, serialization
+ move from rand() to insecure_rand() in general but to GetRand() for session id
+ fix defaults
15a6a16 Implement transaction lock zmq notifications
3bc86a6 always push zmqpubhashtxlock even if tx is not from/to our wallet
568315b fix typo
b6d41d2 fix data size for notification name
339be11 implement zmqpubrawtxlock
70f44f9 update zmq_sub.py with hashtxlock and rawtxlock
3249a63 Fix logging - CTransaction::ToString() always has `\n` at the end of a string, avoid adding empty line
ec03753 make mnw errors and ThreadCheckDarkSendPool less spammy
5b678af fix errorMessage - it should not have `\n`, let output code handle line endings instead
a81cdf7 rename `dash-darksend` thread to `dash-privatesend`
5e4f468 fix/remove outdated code
f1c9678 Break tooltip about third party urls in 2 lines
1c860ce Autobackup refactoring and improvements:
- make nWalletBackups globally accessable
- move autobackup code from init.cpp to walletdb.cpp, see AutoBackupWallet function
- refactor autobackup code to warn user if autobackup failed instead of silently ignoring this fact
- refactor autobackup code to be able to backup fresh new wallet right after it was created, add this functionality to init sequence
- add new cmd-line option "-walletbackupsdir" to specify full path to directory for automatic wallet backups, see GetBackupsDir function
0ba1548 autobackup in PS:
- add nKeysLeftSinceAutoBackup to have some idea how many keys in keypool are more or less safe, show it in advanced PS UI mode and in rpc output for privatesend and getwalletinfo commands
- add autobackups support in PrivateSend mixing both in daemon and QT mode, warn user if number of keys left since last autobackup is very low or even stop mixing completely if it's too low
f3a2494 Warn about a special case - less than 60 seconds between restarts i.e. backup file name is the same as previos one. Continue and do not disable automatic backups in this case
.
e7b56bd Refactor to address locked wallets issue, replenish keypool and re-initialize autobackup on unlock (only if was disabled due to keypool issue)
Adjust few message strings.
- use "" account address instead
- remove `collateralPubKey` and `SetCollateralAddress()` from darksend and create `dummyScriptPubkey` and `InitDummyScriptPubkey()` in masternodeman instead
- initialize `dummyScriptPubkey` before loading cache otherwise MNs could be removed because of the invalid tx
- make logthreadnames work correctly without logtimestamps (and with emty strings again)
- fix crash in debug (it3)
- log debug info about locks in one line
- show actual DS rounds instead of n/a in coin control while in debug mode
- fix initial string in debug.log: "Bitcoin version" -> "Dash version"
- Syncing process is now event based, rather than timeout based. This means the system can tell when it's done with each step and moves on between phases much faster. In initial testing it seems to be about 10-15x faster and has synced everytime successfully.
- Please remove print debugging when the syncing system is proven to be debugged.
- Add whitelistforcerelay to control forced relaying.
Also renames whitelistalwaysrelay.
Nodes relay all transactions from whitelisted peers, this
gets in the way of some useful reasons for whitelisting
peers-- for example, bypassing bandwidth limitations.
The purpose of this forced relaying is for specialized gateway
applications where a node is being used as a P2P connection
filter and multiplexer, but where you don't want it getting
in the way of (re-)broadcast.
This change makes it configurable with whitelistforcerelay.
- Blacklist -whitelistalwaysrelay; replaced by -whitelistrelay.
Github-Pull: #7439
Rebased-From: 325c725fb689d113e02a
"permit" is currently used to configure transaction filtering, whereas replacement is more to do with the memory pool state than the transaction itself.
Add a configuration option `-permitrbf` to set transaction replacement policy
for the mempool.
Enabling it will enable (opt-in) RBF, disabling it will refuse all
conflicting transactions.
Conflicts:
src/init.cpp
src/main.cpp
src/main.h
Github-Pull: #7386
Rebased-From: b768108d9c
