We must watch out to not blindly use externally provided keys in unordered
sets/maps, as attackers might find ways to cause unbalanced hash buckets
causing performance degradation.
Allows convenient salted hashing with unordered maps and sets. Useful when
there is a risk of unbalanced hash buckets slowing things down, e.g. when
externally supplied hashes are used as keys into a map.
* Indicate success when signing was unnecessary
* Fix typo in name of LLMQ_400_60
* Move RemoveAskFor call for CLSIGs into ProcessNewChainLock
In case we got INV items for the same CLSIG that we recreated through
HandleNewRecoveredSig, (re-)requesting of the CLSIG from other peers
becomes unnecessary.
* Move Cleanup() call in CChainLocksHandler::UpdatedBlockTip up
We bail out early in a few situations from this method, so that Cleanup()
might not be called while its at the bottom.
* Bail out from CChainLocksHandler::UpdatedBlockTip if we already got the CLSIG
* Call RemoveAskFor when QFCOMMITMENT was received
Otherwise we might end up re-requesting it for a very long time when the
commitment INV was received shortly before it got mined.
* Call RemoveSigSharesForSession when a recovered sig is received
Otherwise we end up with session data in node states lingering around until
a fake "timeout" occurs (can be seen in the logs).
* Better handling of false-positive conflicts in CSigningManager
The old code was emitting a lot of messages in logs as it treated sigs
for exactly the same session as a conflict. This commit fixes this by
looking at the signHash before logging.
Also handle a corner-case where a recovered sig might be deleted between
the HasRecoveredSigForId and GetRecoveredSigById call.
* Don't run into session timeout when sig shares come in slow
Instead of just tracking when the first share was received, we now also
track when the last (non-duplicate) share was received. Sessios will now
timeout 5 minutes after the first share arrives, or 1 minute after the last
one arrived.
* Add libbacktrace to depends
This is currently only useful to extract symbols. It fails to gather
stacktraces when compiled with MinGW, so we can only use it to get symbol
information from a stack trace which we gathered outside of libbacktrace.
* Add -mbig-obj to CXXFLAGS for MinGW builds
* Implement stacktraces for C++ exceptions
This is a hack and should only be used for debugging. It works by wrapping
the C++ ABI __wrap___cxa_allocate_exception. The wrapper records a backtrace
and stores it in a global map. Later the stacktrace can be retrieved with
GetExceptionStacktraceStr.
This commit also adds handlers to pretty print uncaught exceptions and
signals.
* Use GetPrettyExceptionStr for all unhandled exceptions
* Use --enable-stacktraces in CI for linux32/linux64
* Register exception translators to pretty print exceptions in unit tests
* Catch and print python exceptions when stopping nodes
Otherwise the code at the bottom is never executed when nodes crash,
leading to no output of debug.log files on Travis.
* Remove now unneeded/unused TestCrash methods
Instead of trying to manually figure out params for different quorum/ring sizes, connect to nodes at indexes (i+2^k)%n where k: 0..floor(log2(n-1))-1, n: size of the quorum/ring
* Implement and use SigShareMap instead of ordered map with helper methods
The old implementation was relying on the maps being ordered, which allowed
us to grab all sig shares for the same signHash by doing range queries on
the map. This has the disadvantage of being unnecessarily slow when the
maps get larger. Using an unordered map would be the naive solution, but
then it's not possible to query by range anymore.
The solution now is to have a specialized map "SigShareMap" which is
indexed by "SigShareKey". It's internally just an unordered map, indexed by
the sign hash and another unordered map for the value, indexed by the
quorum member index.
* Only use unordered maps/sets in CSigSharesManager
These are faster when maps/sets get larger.
* Use unorderes sets/maps in CSigningManager
* Don't sleep in WorkThreadMain when CPU intensive work was done
When the current iteration resulted in CPU intensive work, it's likely that
the next iteration will result in work as well. Do not sleep in that case,
as we're otherwise wasting (unused) CPU resources.
* No matter how fast we process sig shares, always force 100ms between sending
* Apply review suggestions
This removes the burden on the message handler thread when many sig batches
arrive. The expensive part of deserialization is now performed in the sig
shares worker thread.
This also removes the need for the specialized deserialization of the sig
shares which tried to avoid the malleability check, as CBLSLazySignature does
not perform malleability checks at all.
In some cases it takes too much time to perform full deserialization of
BLS signatures in the message handler thread. Better to just read the
buffer and do the actual deserialization when the signature is needed for
the first time (which is can be in another thread).
This adds the reading side of a pipe to the read-set when calling select().
Writing to the writing side of the pipe then causes select() to wake up
immediately. Otherwise it would wait for the timeout of 50ms, even if there
is data that could possibly be sent.
This is useful when many messages need are pushed with optimistic send being
disabled. After all messages have been pushed, WakeSelect() can then wakeup
the select() thread and force a re-check for pending data to send.
This is currently only implemented for POSIX compliant systems as we assume
that heavy-load daemons (like masternodes) are usually run on Linux.
Profiling has shown that optimistic send causes measurable slowdowns when
many messages are pushed, even if the sockets are non-blocking. Better to
allow disabling of optimistic sending in such cases and let the network
thread do the actual socket calls.
* Fix incorrect usage of begin() when genesis block is requested in "protx diff"
.begin() on mapBlockIndex does NOT return the genesis block, but just the
block with lowest hash.
The fix is to use chainActive[0] to get the genesis block.
* Update src/evo/simplifiedmns.cpp
Co-Authored-By: codablock <ablock84@gmail.com>
* Do not process blocks in CDeterministicMNManager before dip3 activation
This should save us some cpu/disk on initial sync/reindex
* Write initial snapshot on dip3 activation
* Drop registry deletion of the old key
* Drop no longer used CGovernanceObjectVoteFile::RemoveOldVotes()
* Drop temporary disconnect code and bump min protos to 70213
* drop comment
* fix
* Do not access wallet directly from masternodelist ui, use wallet model instead
* Don't access deterministicMNManager from UI directly, use client model instead
* Send just a general signal to UI elements when mn list has changed and let them handle it in their specific ways
* Drop mn list update timers and use signals instead
* some cleanup
* Move initial UI update to init.cpp
* Refactor getMasternodeList()
* Rename setMasternodeCount to updateMasternodeCount
* Drop legacy code in comments
* Drop NotifyMasternodeListChanged from uiInterface and use NotifyBlockTip instead
8e209340c85fc2493d7d1d7affe7e316bb613cbd build: Add CLIENT_VERSION_BUILD to CFBundleGetInfoString (fanquake)
Pull request description:
As mentioned in #14697, if you download the `0.17.0.1` dmg, and inspect the `.app` bundle, the version in the GetInfo string reads `0.17.0`, which is confusing given you're expecting `0.17.0.1`:
<img width="391" alt="0 17 0 1" src="https://user-images.githubusercontent.com/863730/48300032-fbb54b00-e510-11e8-9bcd-77e1fffffc63.png">
This PR adds `CLIENT_VERSION_BUILD` to the string, so that the full version number is displayed, i.e:
<img width="327" alt="this pr" src="https://user-images.githubusercontent.com/863730/48300015-7893f500-e510-11e8-98b9-80424719a082.png">
Tree-SHA512: f553253d03283639cc4dda00c8004b5c63ae2b489762e5e8c666166e71b14e672792c1df678f87484d51d153b5781c5ec1b145774096600f504833024ae8baea
6c1fb73 Improve logging in bctest.py if there is a formatting mismatch (John Newbery)
Tree-SHA512: ef33f4766df92a987cd714d73b98277616ff947ad0e43811013dda668e31464062816480bd654865231d56d37fb4d6e4ccdccbcb2f0e2f01f49572b843a232ae
