Normally bitcoin core does not display any network originated strings without
sanitizing or hex encoding. This wasn't done for strcommand in many places.
This could be used to play havoc with a terminal displaying the logs,
especially with printtoconsole in use.
Thanks to Evil-Knievel for reporting this issue.
Conflicts:
src/main.cpp
src/net.cpp
src/rpcserver.cpp
Rebased-From: 28d4cff0ed
Github-Pull: #5770
- add number of rounds to outputs
- cache rounds calculation results of GetInputDarksendRounds
- select shortest rounds chain instead of the first found
1: Darksend layout widened by 2 characters (4 digit amounts + 2 digit rounds didn't fit in some languages)
2: "Last Darksend Status" messages use now the increased width from 1:
- Scan IX locks on new blocks to make sure no conflicting txes are present
- Upon completion of a IX lock, check for conflicts and remove blocks if needed
This harmonizes the block fetch timeout with the existing ping timeout
and eliminates a guaranteed eventual failure from congestion collapse
for a network operating right at its limit.
It's unlikely that we wouldn't suffer other failures if we were really
anywhere near the network's limit, and a complete avoidance of congestion
collapse risk requires (I think) an exponential back-off. So this isn't
a major concern, but I think it's also useful for reducing the complexity
of understanding out timeouts.
Github-Pull: #5647
Rebased-From: 3ff735c99a
- before it was possible to use the steps to change e.g. amouns of
authenticated or unauthenticated payment requests (AmountSpinBox is
already set to read-only here) - this is now fixed
- also move the reimplemented stepEnabled() function to the
protected section of our class, where it belongs (see Qt doc)
Github-Pull: #5637
Rebased-From: 0fd9e2bf43
vecMasternodes.size() == 0 is a nearly impossible condition due to the behavior
of dseep. Each time a node receives a ping where it's unaware of the masternode
it will ask for the dsee from it's peer.
- if(c % 5 == 0 && (RequestedMasterNodeList <= 2 || vecMasternodes.size()
+ if(c % 5 == 0 && RequestedMasterNodeList < 3){
Makes it possible to compactly provide a delibrately invalid signature
for use with CHECK(MULTI)SIG. For instance with BIP19 if m != n invalid
signatures need to be provided in the scriptSig; prior to this change
those invalid signatures would need to be large DER-encoded signatures.
Note that we may want to further expand on this change in the future by
saying that only OP_0 is a "valid" invalid signature; BIP19 even with
this change is inherently malleable as the invalid signatures can be any
validly encoded DER signature.
Rebased-From: 2fa9a8ec86
Github-Pull: #5627
Darksend defaults to a new mode which enables inputs/outputs
of each session to be different. For example 10DRK can be input
and 1DRKx10 can be output. This strengthens the anonymity of
Darksend greatly, which also increasing the usability (Users who
run out of .1DRK denominations can simply turn on Darksend to
split up larger inputs).
- When attempting to connect to a masternode for submission into the pool a recursive call to DoAutoDenominate was used. This could possibly take more than 1 minute to complete if it found a string of bad masternodes, in which case the correct masternode was overwritten and replaced with an invalid one. Upon submission, the DS TX was given to the incorrect node causing collateral to be charged.
- To fix this I've removed the recursion and added a critical section to DoAutoDenominate.
- Exact input denominations are matched in PrepareDarksendDenominate to remove the possibility of having change in the pool
- Removed disabled denominations, not needed anymore
Exact amounts are now allocated directly to denominated
funds then submitted to the pool. This improves anonymity
by never having non-denomination inputs enter or exit the pool.
Randomness has also been added to the amount of each session to
improve anonymity.
- qt: avoid hard-coding font names
They may not contain all necessary characters for a language
- qt: fix broken unicode chars on osx 10.10
The default font changed again.
The real fix is to compile qt against a >= 10.8 sdk, but this is simple enough
to backport to 0.10 to avoid having to do that there.
Note: NSAppKitVersionNumber is a double and there's no official value for
NSAppKitVersionNumber10_10. Since == isn't reliable for doubles, use Apple's
guidelines for testing versions here:
https://developer.apple.com/library/mac/releasenotes/AppKit/RN-AppKit/
Chinese and Japanese fonts have been hard-coded as well, otherwise they fail to
show up at all.
- qt: fonts: allow SubstituteFonts to filter based on user's language
SubstituteFonts() has been moved to after app identification so that QSettings
are accessible.
Github-Pull: #5671
Rebased-From: 73cd4edb4f52954e6efdf5ad78b34a
This avoids a regression for issues like #334 where high speed
repeated connections eventually run the HTTP client out of
sockets because all of theirs end up in time_wait.
Maybe the trade-off here is suboptimal, but if both choices will
fail then we prefer fewer changes until the root cause is solved.
Rebased-From: 1a25a7edf87d2cb48511
Github-Pull: #5674
LiteMode disables Darksend/Masternodes/InstantX for clients
who want speed and don't need access to these features. UI
for Darksend is also hidden while in this mode.
- write to debug log only when debug option is specified
- do not log communication data that can contain secure information
- use newinline for curly braces according to coding conventions
It turns out that some miners have been staying with old versions of
Bitcoin Core because their software behaves poorly with persistent
connections and the Bitcoin Core thread and connection limits.
What happens is that underlying HTTP libraries leave connections open
invisibly to their users and then the user runs into the default four
thread limit. This looks like Bitcoin Core is unresponsive to RPC.
There are many things that should be improved in Bitcoin Core's behavior
here, e.g. supporting more concurrent connections, not tying up threads
for idle connections, disconnecting kept-alive connections when limits
are reached, etc. All are fairly big, risky changes.
Disabling keep-alive is a simple workaround. It's often not easy to turn
off the keep-alive support in the client where it may be buried in some
platform library.
If you are one of the few who really needs persistent connections you
probably know that you want them and can find a switch; while if you
don't and the misbehavior is hitting you it is hard to discover the
source of your problems is keepalive related. Given that it is best
to default to off until they're handled better.
Github-Merge: #5655
Rebased-From: 16a5c18cea56c1093dae1dd8ee72af
This will disconnect peers that do not transfer a block in 10 minutes, plus
5 minutes for every previously queued block with validated headers
(accomodating downstream bandwidth down to a few kilobytes per second - below
that the node would have trouble staying synchronized anyway).
Github-Pull: #5608
Rebased-From: 916130348c
Client crashes about every 24h on mainnet (with lots of masternodes)
and very rarely on testnet. AcceptableInputs has no need to check
HaveCoins as AcceptToMemoryPool does and would rarely cause the
segfault to occur.
New versions of OpenSSL will reject non-canonical DER signatures. However,
it'll happily decode them. Decode then re-encode before verification in order
to ensure that it is properly consumed.
Github-Pull: #5634
Rebased-From: 488ed32f2a
New versions of OpenSSL will reject non-canonical DER signatures. However,
it'll happily decode them. Decode then re-encode before verification in order
to ensure that it is properly consumed.
Github-Pull: #5634
Rebased-From: 488ed32f2a
masternode.conf was broken when any index other than 0 was
used. This fixes it and allows the correct input to be selected
and the masternode to be started successfully.
2ecd294 Bugfix: configure: Correctly detect "nothing to build" condition (Luke Dashjr)
b7a4ecc Bugfix: Only check for boost when building code that requires it (Luke Dashjr)
a19eeac Bugfix: configure: Check for openssl/ec.h (Luke Dashjr)
fe925e2 Use EXTRA_LIBRARIES instead of noinst_LIBRARIES so we can avoid building unused code (Cory Fields)
Otherwise, if CCoinsViewCache::ModifyCoins throws an exception in between
setting hasModifier and constructing the CCoinsModifier, the cache ends up
in an inconsistent state, resulting in an assert failure in the next
modification.
Bug discovered by Wladimir J. van der Laan.
Rebased-From: 1c52aad540
Github-Pull: #5597
With the splashscreen being able to be closed it is possible to
shutdown during the lengthy verifyDB method. (Takes about a minute
on my machine). This change allows us to shutdown much sooner.
Github-Pull: #5557
Rebased-From: 70477a0bdf
- Fixed a few issues when calculating progress including some variables that should be limited to 1 (a and b). GetDenominatedBalance also seemed to be giving bad results so I rewrote it to be cleaner, not sure if that was a part of the problem.
- Progress bar is only recalculated when all inputs in wallet have been confirmed (will stop the progress from jumping around)
Crash was caused by Params() usage in CDarkSendPool::CDarkSendPool upon wallet start. I've moved init of the collateral address outside of the class to CDarkSendPool.InitCollateralAddress() instead.
More info regarding KeePass: http://keepass.info/
KeePass integration will use KeePassHttp (https://github.com/pfn/keepasshttp/) to facilitate communications between the client and KeePass. KeePassHttp is a plugin for KeePass 2.x and provides a secure means of exposing KeePass entries via HTTP for clients to consume.
The implementation is dependent on the following:
- crypter.h for AES encryption helper functions.
- rpcprotocol.h for handling RPC communications. Could only be used partially however due some static values in the code.
- OpenSSL for base64 encoding. regular util.h libraries were not used for base64 encoding/decoding since they do not use secure allocation.
- JSON Spirit for reading / writing RPC communications
The following changes were made:
- Added CLI options in help
- Added RPC commands: keepass <genkey|init|setpassphrase>
- Added keepass.h and keepass.cpp which hold the integration routines
- Modified rpcwallet.cpp to support RPC commands
The following new options are available for darkcoind and darkcoin-qt:
-keepass Use KeePass 2 integration using KeePassHttp plugin (default: 0)
-keepassport=<port> Connect to KeePassHttp on port <port> (default: 19455)
-keepasskey=<key> KeePassHttp key for AES encrypted communication with KeePass
-keepassid=<name> KeePassHttp id for the established association
-keepassname=<name> Name to construct url for KeePass entry that stores the wallet passphrase
The following rpc commands are available:
- keepass genkey: generates a base64 encoded 256 bit AES key that can be used for the communication with KeePassHttp. Only necessary for manual configuration. Use init for automatic configuration.
- keepass init: sets up the association between darkcoind and keepass by generating an AES key and sending an association message to KeePassHttp. This will trigger KeePass to ask for an Id for the association. Returns the association and the base64 encoded string for the AES key.
- keepass setpassphrase <passphrase>: updates the passphrase in KeePassHttp to a new value. This should match the passphrase you intend to use for the wallet. Please note that the standard RPC commands walletpassphrasechange and the wallet encrption from the QT GUI already send the updates to KeePassHttp, so this is only necessary for manual manipulation of the password.
Sample initialization flow from darkcoin-qt console (this needs to be done only once to set up the association):
- Have KeePass running with an open database
- Start darkcoin-qt
- Open console
- type: "keepass init" in darkcoin-qt console
- (keepass pops up and asks for an association id, fill that in). Example: mydrkwallet
- response: Association successful. Id: mydrkwalletdarkcoin - Key: AgQkcs6cI7v9tlSYKjG/+s8wJrGALHl3jLosJpPLzUE=
- Edit darkcoin.conf and fill in these values
keepass=1
keepasskey=AgQkcs6cI7v9tlSYKjG/+s8wJrGALHl3jLosJpPLzUE=
keepassid=mydrkwallet
keepassname=testwallet
- Restart darkcoin-qt
At this point, the association is made. The next action depends on your particular situation:
- current wallet is not yet encrypted. Encrypting the wallet will trigger the integration and stores the password in KeePass (Under the 'KeePassHttp Passwords' group, named after keepassname.
- current wallet is already encrypted: use "keepass setpassphrase <passphrase>" to store the passphrase in KeePass.
At this point, the passphrase is stored in KeePassHttp. When Unlocking the wallet, one can use keepass as the passphrase to trigger retrieval of the password. This works from the RPC commands as well as the GUI.
Besides giving a nicer error, this also prevents logging arbitrary data (which could have been used to exploit log readers) into debug.log
Rebased-From: 7f71813919
Github-Pull: #5499
- Made masternodes/darksend compatible with regression testing mode (a local-only blockchain that doesn't require mining). Developers can now test multiple rounds in a few minutes without waiting on mining (much faster).
- Added dsee security verification to v11
- darkSendMasternodes -> vecMasternodes (must clearer)
Darksend is now capable of taking queue objects (which show who wants to mix what)
and looking at it's own inputs to see if it's at all possible to join their mixing
session. This plus other improvements should make Darksend much faster for mixing
coins.
DoAutoDenomination just wrote to the debug.log and because of that users commonly would have a hard time seeing what was happening. This fixes that by setting a status and displaying that status in the overview.
Previously an empty script wouldn't be hashed, and CScriptID would be
assigned the incorrect value of 0 instead. This bug can be seen in the
RPC decodescript command:
$ btc decodescript ""
{
"asm" : "",
"type" : "nonstandard",
"p2sh" : "31h1vYVSYuKP6AhS86fbRdMw9XHieotbST"
}
Correct output:
$ btc decodescript ""
{
"asm" : "",
"type" : "nonstandard",
"p2sh" : "3J98t1WpEZ73CNmQviecrnyiWrnqRhWNLy"
}
Rebased-From: d78f0dafd5
Github-Pull: #5541
- Progress bar is far more accurate now. It only takes into account the inputs that could possibly go into Darksend and ignores the rest.
- Darksend can support down to 1.5DRK now.
- New "masternode outputs" command for start-many
Don't allow immediate inv driven block downloads if
a peer already has MAX_BLOCKS_IN_TRANSIT_PER_PEER
active downloads. Prevents bogus inv spam from
blowing up block transfer tracking data structures.
Rebased-From: c90770430d
Github-Pull: #5507
'Sane' was already defined by this code as:
fee.GetFeePerK() > minRelayFee.GetFeePerK() * 10000
But sanity was only enforced for data loaded from disk.
Note that this is a pretty expansive definition of 'sane': A 10 BTC
fee is still passes the test if its on a 100kb transaction.
This prevents a single insane fee on the network from making us reject
our stored fee data at start. We still may reject valid saved fee
state if minRelayFee is changed between executions.
This also reduces the risk and limits the damage from a cascading
failure where one party pays a bunch of insane fees which cases
others to pay insane fees.
Rebased-From: 6484930690
Github-Pull: #5481
Previously the minRelayTxFee was only enforced on user specified values.
It was possible for smartfee to produce a fee below minRelayTxFee which
would just result in the transaction getting stuck because it can't be
relayed.
This also introduces a maxtxfee option which sets an absolute maximum
for any fee created by the wallet, with an intention of increasing
user confidence that the automatic fees won't burn them. This was
frequently a concern even before smartfees.
If the configured fee policy won't even allow the wallet to meet the relay
fee the transaction creation may be aborted.
Rebased-From: aa279d6131
Github-Pull: #5485
Previously transactions were only tested again the
STANDARD_SCRIPT_VERIFY_FLAGS prior to mempool acceptance, so any bugs in
those flags that allowed actually-invalid transactions to pass would
result in allowing invalid transactions into the mempool. Fortunately
there is a second check in CreateNewBlock() that would prevent those
transactions from being mined, resulting in an invalid block, however
this could still be exploited as a DoS attack.
Rebased-From: 7c041b3b91
34318d7 RPC-test based on invalidateblock for mempool coinbase spends (Gavin Andresen)
7fd6219 Make CTxMemPool::remove more effecient by avoiding recursion (Matt Corallo)
b7b4318 Make CTxMemPool::check more thourough by using CheckInputs (Matt Corallo)
723d12c Remove txn which are invalidated by coinbase maturity during reorg (Matt Corallo)
868d041 Remove coinbase-dependant transactions during reorg. (Matt Corallo)
932ef50 [REST] JSON output: remove block infos from tx details if it is nested in block (Jonas Schnelli)
cae5486 [REST] added /rest/block/notxdetails/<hash> into REST-interface.md documentation (Jonas Schnelli)
73351c3 [REST] /rest/block response with full tx details (Jonas Schnelli)
4be639e Use RPC_INVALID_PARAMETER instead of RPC_WALLET_ERROR for invalid amount. No return at the end of void function. (Pavel Janík)
b93173d Move SendMoney() to rpcwallet.cpp. (Pavel Janík)
- rest block request returns full unfolded tx details
- /rest/block/notxdetails/<HASH> returns block where transactions are only represented by its hash
TLS is subject to downgrade attacks when SSLv3 is available, and
SSLv3 has vulnerabilities.
The popular solution is to disable SSLv3. On the web this breaks
some tiny number of very old clients. While Bitcoin RPC shouldn't
be exposed to the open Internet, it also shouldn't be exposed to
really old SSL implementations, so it shouldn't be a major issue
for us to disable SSLv3.
There is more information on the downgrade attacks and disabling
SSLv3 at https://disablessl3.com/ .
Rebased-From: 683dc4009b
5ec654b [Qt] update paymentserver license and cleanup ordering (Philip Kaufmann)
4333e26 [Qt] add BIP70 DoS protection test (Philip Kaufmann)
31f8494 [Qt] add BIP70 payment request size DoS protection for URIs (Philip Kaufmann)
2284ccb [Qt] remove dup lock that is done in SetAddressBook() (Philip Kaufmann)
1ec753f [Qt] ensure socket is set to NULL in PaymentServer::ipcSendCommandLine (Philip Kaufmann)
814429d [Qt] add BIP70/BIP71 constants for all messages and mime types (Philip Kaufmann)
b82695b [Qt] make PaymentServer::ipcParseCommandLine void (Philip Kaufmann)
This still leaves transactions in mempool that are potentially
invalid if the maturity period has been reorged out of, but at
least they're not missing inputs entirely.
- current code only does this for payment request files, which are
used on Mac
- also rename readPaymentRequest to readPaymentRequestFromFile, so it's
obvious that function only handles payment request files and not URIs
- small logging changes in readPaymentRequestFromFile
TLS is subject to downgrade attacks when SSLv3 is available, and
SSLv3 has vulnerabilities.
The popular solution is to disable SSLv3. On the web this breaks
some tiny number of very old clients. While Bitcoin RPC shouldn't
be exposed to the open Internet, it also shouldn't be exposed to
really old SSL implementations, so it shouldn't be a major issue
for us to disable SSLv3.
There is more information on the downgrade attacks and disabling
SSLv3 at https://disablessl3.com/ .
b0210a9 Merge pull request #135
ee3eb4b Fix a memory leak and add a number of small tests.
4d879a3 Merge pull request #134
d5e8362 Merge pull request #127
7b92cf6 Merge pull request #132
0bf70a5 Merge pull request #133
29ae131 Make scalar_add_bit test's overflow detection exact
9048def Avoid undefined shift behaviour
efb7d4b Use constant-time conditional moves instead of byte slicing
d220062 Merge pull request #131
82f9254 Fix typo
601ca04 Merge pull request #129
35399e0 Bugfix: b is restricted, not r
c35ff1e Convert lambda splitter to pure scalar code.
cc604e9 Avoid division when decomposing scalars
ff8746d Add secp256k1_scalar_mul_shift_var
bd313f7 Merge pull request #119
276f987 Merge pull request #124
25d125e Merge pull request #126
24b3c65 Add a test case for ECDSA recomputing infinity
32600e5 Add a test for r >= order signature handling
4d4eeea Make secp256k1_fe_mul_inner use the r != property
be82e92 Require that r and b are different for field multiplication.
597128d Make num optional
659b554 Make constant initializers independent from num
0af5b47 Merge pull request #120
e2e8a36 Merge pull request #117
c76be9e Remove unused num functions
4285a98 Move lambda-splitting code to scalar.
f24041d Switch all EC/ECDSA logic from num to scalar
6794be6 Add scalar splitting functions
d1502eb Add secp256k1_scalar_inverse_var which delegates to GMP
b5c9ee7 Make test_point_times_order test meaningful again
0b73059 Switch wnaf splitting from num-based to scalar-based
1e6c77c Generalize secp256k1_scalar_get_bits
5213207 Add secp256k1_scalar_add_bit
3c0ae43 Merge pull request #122
6e05287 Do signature recovery/verification with 4 possible recid case
e3d692f Explain why no y=0 check is necessary for doubling
f7dc1c6 Optimize doubling: secp256k1 has no y=0 point
666d3b5 Merge pull request #121
2a54f9b Correct typo in comment
9d64145 Merge pull request #114
99f0728 Fix secp256k1_num_set_bin handling of 0
d907ebc Add bounds checking to field element setters
bb2cd94 Merge pull request #116
665775b Don't split the g factor when not using endomorphism
9431d6b Merge pull request #115
e2274c5 build: osx: attempt to work with homebrew keg-only packages
git-subtree-dir: src/secp256k1
git-subtree-split: b0210a95da433e048a11d298efbcc14eb423c95f
